Ruger American Gen 2 .223 Review & Ammo Test

Рет қаралды 19,333

Күн бұрын

Testing a few types of ammo at 100 yards in the new Ruger American Gen 2 in .223. Not great results but I'll take it back out soon to try and find a varmint and hunting load it likes.
Gear from this video:
Rifle- Ruger American Gen 2 Standard .223 20" Model # 46909
Mag: Magpul 20rd M3 Gen 3: app.rockporch.com/prdlink/yuN...
Scope- Leupold VX-R 4-12X40 Firedot Duplex
Rest- Caldwell Rock Jr. bit.ly/3U31trX
Other gear I use and recommend:
AMMO FAVORITES:
Garand Ball Ammo: app.rockporch.com/prdlink/J7H...
Garand Match Ammo: app.rockporch.com/prdlink/TDV...
PMC Bronze .223: scheels.rockporch.com/prdlink...
Federal Auto Match 22LR: scheels.rockporch.com/prdlink...
CCI Mini-Mag 40gr: app.rockporch.com/prdlink/duv...
RANGE GEAR:
AR500 Targets: scheels.rockporch.com/prdlink...
Paper Targets: scheels.rockporch.com/prdlink...
T-post Hanger: app.rockporch.com/prdlink/7VA...
Sunglasses - Oakley Mainlink: app.rockporch.com/prdlink/rok...
Eye Protection: app.rockporch.com/prdlink/pB5...
AR Trigger - ATC Gold: alnk.to/aWCWIOc
700 Trigger - Timney: scheels.rockporch.com/prdlink...
OPTICS:
Red Dot - Leupold Deltapoint Pro: app.rockporch.com/prdlink/dlU...
LVPO - Leupold VX-6HD 1-6x24: app.rockporch.com/prdlink/ugl...
Spotting Scope - Leupold SX-2: scheels.rockporch.com/prdlink...
Binos - Leupold BX-2: app.rockporch.com/prdlink/qv1...
CAMERA SETUP:
Body- Canon RP: app.rockporch.com/prdlink/kOT...
Lens: adorama.rockporch.com/prdlink...
SD Card: app.rockporch.com/prdlink/d5V...
Rode VideoMicro: app.rockporch.com/prdlink/Ycy...
GoPro: app.rockporch.com/prdlink/a4h...
Magview Spotting Scope adapter: app.rockporch.com/prdlink/vAk...
*********************************
BECOME A CREATOR!
Click this link to become a RockPorch Affiliate link Creator and earn money on your content:
app.rockporch.com/Identity/Ac...
DISCLAIMER: This description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission at no extra cost to you. This helps support the channel and allows us to continue to make videos like this. Thank you for your support!
0:00 Overview
0:59 Ammo
1:26 55gr
2:05 50gr
2:32 62gr
2:58 64gr
3:16 69gr
3:43 73gr
4:16 Target
5:17 Final Thoughts

Пікірлер: 43

@ottokittel709 7 күн бұрын

I have the exact rifle. I installed the Timney trigger and reduced the trigger pull to just shy of 2 lbs tigger pull. and it tighten up. my groups.some. the Timney trigger breaks like ice, with zero travel and creep. well worth the extra money. I loaded up some lapua brass with 65 gr Sierra gamekings, and Nosler 60 gr partition bullets with Remington 7 1/2 primers and benchmark powder. Sierra 65 gr were 3/4 inch group, and the Nosler partition were 1 1/2 inch. for Florida hunting it covers all bases. I have taken some real nice bucks with the Sierra 65 gr bullet with the 223 rem.

@tankmeister8131 4 ай бұрын

That’s the second review I’ve seen with really average groups

@BlueCollarRay 4 ай бұрын

They are really average shooters, just slinging shots.

@jonathanm1854 Ай бұрын

My Gen 2 Grendel is printing .48” at 100, 5 shots with my 107 smk loads

@Fisherhunt56 4 ай бұрын

I CAN SEE A TON OF MOVEMENT ON YOUR FRONT REST

@Deuceblank 14 күн бұрын

Just got my gen2 today in 6.5grendel exactly like yours. Groups are sub par 1.5in to 2in. Last round hold open is junk. I load an empty case first then live rounds on top. Im tearing it down to the basics, re torque stock, scope base with locktite. Future thing will be budget chasis and steel 20moa base. I think its got .75moa in, just needs more break in and better fit and finish. Its a budget deer/hog gun. My boy will slay with it😂😂😂

@davemiller3027 4 ай бұрын

I had similar results out my Gen II 223. I took the stock off and found some of the Splatter Paint on the V-Block. I cleaned it off and then cleaned up the barrel channel really good. Adjusted the trigger down to 3 pounds and made sure the stock was torqued. Then took off the scope rail, cleaned the mounting surface and screws/ holes and applied some blue loctight. Recounted the scope and re-torqued the mounts. Cleaned barrel reallyfood. Now its shootings much better. It just loves Honardy 75 gr BTHP and Black 62gr. Both are averaging around .65 to .80. It'll even shoot Tula 75gr right at 1.5. I have a Mcarbo trigger spring, just waiting to install it.

@NTXoutdoors 4 ай бұрын

Nice. Ill try that and post another test with some other ammo.

@waynebrown2546 Ай бұрын

interesting. I have a 6.5cm and saw a 308 in the gun shop. neither had the set screw nor the spring for the trigger adjust. they are just empty. both were 3.5# pull out of the box. Don't know if other calibers come with the spring and screw.

@joeloweryourexpectationsbiden 4 ай бұрын

Not sure about gen 2, but i know for a fact that the stock on the gen one with a bipod will destroy accuracy tests. Flimsy material puts pressure on the barrel.

@ThePaintballer1994 4 ай бұрын

Those cows got opinions lol

@NTXoutdoors 4 ай бұрын

Too many of them!

@sneakybow1 5 күн бұрын

Stiff bolt after the shot is because it's a cock on open design so it's going to be stiffer than on close.

@briantrent1155 Ай бұрын

How far were you shooting? My ruger mpr proof ar has better groups at 200 yards with Winchester target 55 grain

@NTXoutdoors Ай бұрын

100 yards. I’ll try some out

@eskimoreloader 4 ай бұрын

Try Hammer bullets

@petercecere8435 Ай бұрын

What size scope and height rings are you running?

@NTXoutdoors Ай бұрын

Leupold 4-12x40. Low rings

@Ryan-je9cm 4 ай бұрын

Need to work on that trigger pull.

@gjjm123 4 ай бұрын

Is that the 46909 model number.

@NTXoutdoors 4 ай бұрын

Yes it is

@GuacIsExtra99 4 ай бұрын

If it groups cheap pmc 55 grain then I’m in lol

@lazybear236 3 ай бұрын

Howa 1500 mostly shoots better from the factory

@mitchellnowacki3673 3 ай бұрын

Theyre supposed to be only giving a 20inch bbl on standard long actions and magnums. Why the hell would you want a .270 that performs like a 6.8spc. I hate this short barrel crap. Ot otherwise would be ok.

@NTXoutdoors 3 ай бұрын

I agree. I’d like to see them in a 24 inch.

@Deuceblank 14 күн бұрын

I seen alot of 20inch 6.5prc's😂 They just bought a gun that shoots boutique creedmoor ammo😂 and getting needmoor velocity

@sneakybow1 5 күн бұрын

Because people are putting suppressors on them and don't want to walk around with a 30+" barrel setup. Buy what you like, and don't worry about everyone else.

@DanKrischke 4 ай бұрын

"OK" is really not OK with a weapon. It should be "real darn good".

@MRxr400 4 ай бұрын

note to self, don't recommend this rifle to friends looking for a 223. Those groups were average. the other cal's of gen 2 rugers seem to be shooting better.

@7.62x51mm 3 ай бұрын

my ruger american 556 gets sub MOA with almost everything i put through it

@gjjm123 4 ай бұрын

Do you know if 556 can shoot out of it. I think I heard it's not recommended

@NTXoutdoors 4 ай бұрын

No. Chambered for .223 only. 5.56 can cause pressure issues.

@joeloweryourexpectationsbiden 4 ай бұрын

The original ruger american was chambered in .223 wylde. Is the new one not? @@NTXoutdoors

@StrangeGarage 4 ай бұрын

They make a gen 2 5.56 variant.

@NTXoutdoors 4 ай бұрын

Yes the ranch version is 5.56. The standard model is 223

@JohnQDoe-ut3jj 4 ай бұрын

I bought this gun several weeks ago and it took several trips to the range to determine the best ammo it likes. For me, the 62 grain Federal FMJ gave me the best groups followed by 64 grain. This is not the most accurate rifle Ruger has turned out. Am disappointed in Ruger’s performance and accuracy with this rifle.

@NTXoutdoors 4 ай бұрын

I’ll try that one out. I feel like both me and the rifle can do better than the groups I got on camera. Shooting it some more I’m getting MOA with match ammo so I’m happy.

@accuracyfreaks442 4 ай бұрын

I bought the same rifle. Ran just about every type of match ammo known to man and grouped like shit. I ended up sending it back to ruger for repairs and it still shoots like a total dumpster fire. I'm done with ruger!

@sneakybow1 5 күн бұрын

I would have checked scope mounts first before I blamed the rifle. Most times it's the loose nut behind the trigger that's the problem.