Wyze Outdoor Plug - Best Home Assistant Bluetooth Proxy? How To

Рет қаралды 20,023

Күн бұрын

One of the cheapest and best Home Assistant Bluetooth Proxies I've found. And it is all done with a no soldering solution! Wyze Outdoor Plug amzn.to/3r1l5k4 Complete How To - digiblur.com/2023/09/03/wyze-...
⚡Parts Used
Wyze Plug Outdoor - amzn.to/3r1l5k4
USB TTL adapter - amzn.to/3R5obhx or www.tindie.com/products/voltl...
Dupont jumper wires - amzn.to/45BvX7h
Optional but highly recommended USB data switch - amzn.to/44DO5vY
BDM Frame with pins amzn.to/3R2EkV6 or s.click.aliexpress.com/e/_DdA...
Extra BDM pins if necessary as some only come with 4 pins we need 5
Triangle bit screw driver - amzn.to/3fhaQQz or amzn.to/3suihr8
⚡Products We Use/Recommend
Amazon US - amzn.to/2YZNDeO
Amazon UK - amzn.to/2TnG2R4
Amazon CA - amzn.to/2JWsNq5
⚡Be Social!⚡
Main Website - www.digiblur.com
Discord Chat - discord.digiblur.com
Patreon - patreon.digiblur.com
Join / @digiblurdiy
Facebook - facebook.digiblur.com
Instagram - instagram.digiblur.com
Please note, the product links above could be affiliate links, using them could earn digiblurDIY a small commission of most purchases and helps with future video projects. Thank you!
00:00 The Why
03:01 The How - No Solder Method
09:34 Installing ESPHome
18:28 Testing
21:27 Other Bluetooth Devices & Closing

Пікірлер: 95

@Zeric1 9 ай бұрын

Here is a trick for cheap USB to serial converters that are marginal for programming an esp device...solder a 220uF low voltage capacitor between GND and 3v. I've done this on a couple that were unreliable and they worked great afterwards. I'm guessing that extra power is only required briefly during a portion of the programming cycle, and the capacitor provides enough storage to ride it out.

@digiblurDIY 9 ай бұрын

Nice trick! Kill the surge for sure.

@ronm6585 10 ай бұрын

Cool! Thanks Travis.

@digiblurDIY 9 ай бұрын

You bet!

@muchtall 10 ай бұрын

Hey man! Love the new do. Looking good!

@digiblurDIY 10 ай бұрын

Awesome thank you! OG has one to match too!

@RambozoClown 10 ай бұрын

Looks good. I was wondering if it was from the last video's fireworks. ;)

@john77099 Ай бұрын

Thanks!

@digiblurDIY Ай бұрын

Welcome!

@jimbrewer5821 10 ай бұрын

Travis, Great video; It provides a great step-by-step tutorial on disassembly and flashing, as well as on ESPHome. Thanks for (another) great video! 👍😊👍

@digiblurDIY 10 ай бұрын

Such an easy process and such cheap plug you know had to be done!

@ChristopherDopp 10 ай бұрын

Thanks for showing the BDM frame/pins. I had no idea they existed. Great video.

@digiblurDIY 10 ай бұрын

Pretty cool solution that a few of us having been using on Discord. I like to solder, but sometimes these just make stuff stupid simple for some items.

@jefffrilot9667 10 ай бұрын

I've been using wyze plugs throughout my house to replace wifi plugs that have died. The Bluetooth proxy has been working great for my wireless temp humidity monitors.

@Musicman-50 9 ай бұрын

Curious area you using ESPhome on your Wyze plugs.? I have several Wyze bulbs but assuming they can't be flashed, or I just don't know how to. I just purchased two of these Wyze outdoor plugs unit that I intend to flash with ESPhome. But I use many sonoff s31 plugs as they are so easy to flash tasmoto on and of course energy monitoring is nice. Your thoughts appreciated. Thanks

@jefffrilot9667 9 ай бұрын

@@Musicman-50 I bought several outdoor wyze plugs a while back. Flashed with esphome and use them inside my house.

@billreichard357 9 ай бұрын

Great video. I love these types of video's.

@digiblurDIY 9 ай бұрын

Thanks! I love an inexpensive product that does wonders!

@gregpadberg1402 3 ай бұрын

FYI, the screwdriver bit necessary to open up the case... a 2.3 triangle bit (I assume that's a millimeter measurement) worked OK. As it was the largest triangle bit in the set that I had, a larger one "might" fit. The 2.3 DOES work, with a slightly loose fit.

@cesarposadasatamusic 10 ай бұрын

i flashed my first 2 plugs, sonoff s31 and wyze outdoor plug, using the instructions on your site. many thanks for the great content!

@digiblurDIY 10 ай бұрын

It's addictive! Thanks!

@ScottGiminiani 9 ай бұрын

Aren't the S31's wifi only? I didn't think they could be used as a BT proxy.

@gregpadberg1402 3 ай бұрын

@@ScottGiminiani I believe the S31's don't have any BT capability in them and they can be flashed with either Tasmota or ESPhome.

@voltlog 10 ай бұрын

Hey! Thanks for the mention! I did reach out to you recently via discord DM but I think the notification might have been lost 🙂

@digiblurDIY 10 ай бұрын

Ahh.. I did see it in the early morning before coffee as I did look at that controller before. Your TTL boards are awesome!

@joudatfd 10 ай бұрын

Hi, great video. Loved the no-solder jig thing. Also , great haircut. I switched full bald few years ago and there is no way back ;)

@digiblurDIY 10 ай бұрын

The simplification of life. It was time before summer ended. Couldn't go back either

@jameswyatt1304 8 ай бұрын

Thank you very much for the well-detailed video and guidance. These solve a problem I've got with some dying X-10 external modules for holiday lighting! Starting w/HA+ESPHome on a RasPi4 on the IoT WiFi, but hope to move to a podman container to get the '4 back for other projects. While I really like the VoltLink board and would love to just solder 6-p JST connector squibs on my projects, $50 for one with shipping and the Shelly adapter is just too much to justify vs. an FTDI board. It's more than 3 of these Wyze relays, if my math is right.

@digiblurDIY 8 ай бұрын

Wantmoore has already started going this with his. wantmoore.tech/

@johnraahauge4552 10 ай бұрын

The fun and joy when you realize you have gained access to the neighbors LED strips :)

@digiblurDIY 10 ай бұрын

I keep tyring to add two LEDs and they fail. One day I will get them. I need a bigger antenna!

@Musicman-50 9 ай бұрын

Haha.. Way to funny.

@Musicman-50 10 ай бұрын

This is most exciting. After watching this I ordered two at about 8 bucks each. Great tutorial as always I love your content. Can't wait to play with these. Thanks 👍

@digiblurDIY 9 ай бұрын

Awesome! Thank you!

@Musicman-50 9 ай бұрын

@@digiblurDIYbtw I found some on Groupon for $8 bucks.

@tcflint 6 ай бұрын

Travis, Another add for compatibility is the INKBIRD IBT-6XS (iBBQ 96BA). This is a 6 channel grill thermometer for those of us that like to throw some meat on the smoker while we're getting educated on your channel :) Enjoy your channel, keep up the good work.

@digiblurDIY 6 ай бұрын

Thanks for the info! Excellent! I will add it to my list. BT Proxy is so damn cool.

@tcflint 6 ай бұрын

It is an hopefully the list of devices keeps growing@@digiblurDIY

@djashjones 10 ай бұрын

Yongwei is my go to for quality mains operated relays 🤣🤣

@EmilePolka 10 ай бұрын

every single beken based tuya stuff have built-in BLE, it would be awesome if we can utilize that for BT proxy. right now the BLE functionality is not functional with esphome/openbeken.

@digiblurDIY 10 ай бұрын

You are correct, I don't think you'll see that step taken until after the merge of the beken branch into ESPHome...which is next month! WOOT! Thennnnn they can start looking at adding features to see if that is possible.

@daltonschrader8328 10 ай бұрын

I always recommend using a powered usb hub

@johnc2k2k 14 күн бұрын

Shame they don't make a UK version :(

@johnraahauge4552 10 ай бұрын

Heads up @ 4:34 the 3V pad is the bigger one. Not the one the arrow is pointing at.

@digiblurDIY 10 ай бұрын

yes, it can be tricky. Easier to see on my soldered pictures on the guide. digiblur.com/2023/09/03/wyze-outdoor-plug-esphome-bluetooth-proxy-how-to

@gregpadberg1402 17 күн бұрын

Downloading bin file and choosing between Modern vs. Legacy format is a bit confusing for me as to why, best info I could seem to find is that serial flash uses the "modern" format and OTA update uses the "legacy" format?

@digiblurDIY 17 күн бұрын

Pretty much. Modern has all the partition layout stuff and is for serial flashing to start out.

@bigneilh 10 ай бұрын

what a nice haircut!

@digiblurDIY 10 ай бұрын

When I grow up I want to be just like you! Getting closer by the day.

@bigneilh 9 ай бұрын

@@digiblurDIYgrow that belly

@zyghom 10 ай бұрын

oh, shaving done ;-)

@digiblurDIY 10 ай бұрын

Missed the stream fun I see?

@unmesh59 10 ай бұрын

I've got a couple of these flashed with Tasmota using Blerry as a BLE-to-MQTT gateway to expand the reach of BLE devices. Can I reflash them OTA with ESPHome to use Bluetooth Proxy instead? Also, I had to do power calibration when I flashed them with Tasmota. Is there an equivalent procedure needed with ESPHome?

@digiblurDIY 10 ай бұрын

Yes, you just need to flash them via serial to jump between Tasmota and ESPHome due to the partition size differences. I've included the values at the top of the YAML but you can tweak them as needed if you find them off.

@unmesh59 10 ай бұрын

@@digiblurDIY Thanks. I went to place an order for some more at Woot but reviews say people are receiving single packs though their order was for a four-pack.

@RossReedstrom 10 ай бұрын

@@unmesh59your had me heading back to woot for the first time in a long time. Seems all the outlets are sold out.

@BPH2OS 8 ай бұрын

Generally speaking, these plugs are great. The website guide worked really well. I have almost a dozen flashed with ESPHome for use with Home Assistant. Lately mine seem to reset quite frequently and lose the relay state, defaulting to off. Does anyone know any way to set the default to on or improve the reliability so they don't reset?

@digiblurDIY 8 ай бұрын

I haven't seen that, I know ESPhome only saves the state every so often after the state change.

@BPH2OS 8 ай бұрын

Thanks for the reply. I use these to control my aquarium filters, heaters and lights via home assistant. They're not mission critical, but reliability is important in this application. I like these in particular because they only take up one plug space on the power bar and they're cheap. I think I may have it figured out now, they seem to be working better over the last 48 hours. I've added a line to the configs (1 for each relay). restore_mode: RESTORE_DEFAULT_ON (for the lights, these are off overnight.) restore_mode: ALWAYS_ON (for the heaters and filters, these are always on)

@jayshomebrew 10 ай бұрын

I have the bug where the Wyze plugs turn on for a second if power turns on/off. It happens only on SW1 not SW2. To test if you have this issue, just plug it into a power strip, cycle the power, and SW1 turns on for a half second. Nope, I don't have this set in tasmota, and I've tried different versions of Tasmota. Any help ?

@digiblurDIY 10 ай бұрын

They used GPIO15 which is a strapping pin.

@Hardwyre 7 ай бұрын

I could never get the outdoor plug to proxy BT on Tasmota. For example, I wanted to use the Govee hygrometer outside, but lost an entire weekend trying to get it to work until I realized that the BT Home Assistant discovered was from my Pi, and not the plug. I could never get Tasmota to act as a BT bridge despite the Tasmota BT menu showing it was working great. I used ESPHome and finally got the BT proxy to work, but I like Tasmota's web interface. Any way to get Tasmota to proxy the BT with HA?

@digiblurDIY 7 ай бұрын

You need Esphome for BT proxy. I am not aware of Tasmota supporting BT proxy or the Esphome api.

@Hardwyre 7 ай бұрын

Aye. That seems to be a case. I miss having the ability to view stuff directly on the device like tasmota's web interface allows (I used your esphome with the web server turned off), but it seems to function great otherwise. Thank you for the time you've put into this channel.

@MattScoville 10 ай бұрын

Do you have any suggest for an indoor plug that can be used for bluetooth proxy?

@digiblurDIY 10 ай бұрын

Switchbot digiblur.com/wiki/devices/plugs/switchbot_15_amp_w1901400

@michaelp.caputo8190 6 ай бұрын

If someone hits the pairing button will that reset to factory wyze? My plug seems to have lost programming

@digiblurDIY 6 ай бұрын

With stock firmware or?

@Musicman-50 8 ай бұрын

Disappointed that although the Wyze Outdoor Plug supports two outlets, it however doesn't support individual energy monitoring separately for each outlet, but only energy used on both outlets combined. Otherwise pretty usable. BTW I flashed two of mine with Tasmota vs ESPhome. Both work great.

@digiblurDIY 8 ай бұрын

They had a recent blowout at Home Depots for $5 a plug. I do agree, I wish they had dual channel power monitoring

@Musicman-50 8 ай бұрын

@@digiblurDIY Awesome. I may get a couple more of these. After flashed with Tasmota or ESPHOME they are very useful. The high quality case alone is worth it.

@thibautdeschamps3407 10 ай бұрын

Would be exactly what I need, only problem is Wyze does not have EU plugs... Any idea's for an alternative?

@digiblurDIY 10 ай бұрын

Sorry no, I haven't heard of any other than some esp32 gateways but those aren't plugs like this.

@ScottGiminiani 9 ай бұрын

The plug has two outlets but only a single set of entities for energy monitoring?

@digiblurDIY 9 ай бұрын

Yes. Pretty normal unfortunately. I haven't seen plugs use a 2 or more channel power monitoring chip before.

@gadget1968 10 ай бұрын

Wholy shit your getting some serious gray in the beard... and oh yea many thanks for the content ...

@digiblurDIY 10 ай бұрын

Lol.. thanks for the complement on the camera money well spent! :)

@danagoyette7932 9 ай бұрын

I flashed mine, and it seems like the relay keeps clicking on and off over and over and over, as if the button keeps detecting getting pressed. I ended up having to unbind the button from toggling the relay. Ultimately I want the relays always on anyway, thankfully.

@digiblurDIY 9 ай бұрын

Sounds like a button is jammed, you could take the main board and check the button on the other side. It's a little puzzle game to get it out and back in though.

@gmaclean1 10 ай бұрын

Lmao - the aliexpress link for the bdm frame went up $10 while I was watching the video. Must’ve realized you were sending them some customers hah

@digiblurDIY 10 ай бұрын

Dang. It is just a random one I found on there so definitely buy a different one if the price is better.

@tusmartcasa8177 3 ай бұрын

how I edited the voltage, mine is given me 136.2 v

@digiblurDIY 3 ай бұрын

Check the voltage div sub as the top of the Yaml, you can adjust it.

@tusmartcasa8177 3 ай бұрын

@@digiblurDIY thanks

@zyghom 10 ай бұрын

what exactly this one does: "update_time: 10s " ? ;-) LUX in Volts? ;-)

@digiblurDIY 10 ай бұрын

It's a analog value from the sensor. If you are template pro with a lux sensor, feel free to change it.

@zyghom 10 ай бұрын

@@digiblurDIY I got that but still: unit of light in Volt? ;-)

@digiblurDIY 10 ай бұрын

One from an LDR an an ESP32. They aren't very accurate down to a linear lux value so voltage is fine for most use cases.

@dougle03 10 ай бұрын

Your Amazon UK link didn't work, at least it didn't work, just the Amazon home page came up, albeit with your affiliate link embedded... Was it supposed to show a curated list of common products...?

@digiblurDIY 10 ай бұрын

You can try the amazon.digiblur.com one if that one doesn't work right.