Easily Get Wyze Cam Into Any App // Wyze Docker Bridge
Рет қаралды 64,197
Күн бұрынToday we will look at how to set up the Wyze Docker Bridge. This Docker container will allow you to output the video stream from MOST Wyze Cams and put it into RTSP, RTMP, or HLS. Meaning you can put your video into almost any application or NVR! The best part is it can be run right from Home Assistant.
So check out my easy to follow walkthrough on installation, configuration, and adding to Home Assistant.
❓What future topics would you like me to cover??❓
▶ Buy Me A Beer 🍻: www.buymeacoffee.com/ThisSmar...
▶ Have A Question? Join Our Discord ⁉️: tshouse.link/discord
▶ Timestamps ⌚:
00:00 - Opening
01:02 - Introduction
02:32 - Requirements
03:26 - Installation
05:32 - Note on 2FA
06:24 - Note on MQTT
08:36 - WebUI
09:23 - Adding to Lovelace
10:49 - Note: Change Snapshot Mode
13:40 - Closing
▶ Product Links:
(When available, we use affiliate links and may earn a commission!)
Wyze v3 Camera - amzn.to/3wcRHXw
Wyze Pan v2 - amzn.to/3tdGKnZ
Wyze Cam Outdoor v2 Bundle - amzn.to/3SV0IOV
Wyze v3 Garage Door Kit (with Cam) - amzn.to/3lm6ysZ
Wyze Doorbell (no Chime) - Wyze v3 Garage Door Kit (with Cam) - amzn.to/3lm6ysZ
My Main Home Automation Gear (Kit.co): tshouse.link/homekit
My Z-Wave Home Automation Gear (Kit.co): tshouse.link/zwave
▶ Links in Video 🔗:
(I use Rebrand.ly for my URL shortening)
Wyze Bridge GitHub - tshouse.link/wyzebridge
Wyze Bridge HA Notes - github.com/mrlt8/docker-wyze-...
Information on Wyze Bridge w/ MFA - tshouse.link/wyzebridgemfa
▶ Get a One-Month Trial of Great Music for Creators (This is where I get my music and sound effects): tshouse.link/sound
▶ Website: thissmart.house
▶ Recommended Playlists:
Wyze Cameras: • Bring Wyze Camera Feed...
Wyze Devices: • Wyze
Smart Home 101 (Basics): • How to Wire A Smart Sw...
Home Assistant Add-ons: • Severe Weather Alerts ...
#smarthome #wyze #homeassistant #homeautomation #docker
@annparis8103 Жыл бұрын
Thanks so much for the recommendation to watch your video on the Wyze docker bridge. I don't have Home Assistant but after watching that and more of your in-depth videos on Home Assistant I'm going to use it along with the Wyze docker bridge. I really appreciate the time and effort you take making these videos and sharing your knowledge!
@Ezekiel333 Жыл бұрын
This video was fantastic. I am so thrilled I can setup my cams without flashing the firmware... Worked perfectly!
@waharris007 Жыл бұрын
Worked great! Thanks for the step-by-step instructions. I got my three Wyze cams running perfectly.
@ThisSmartHouse Жыл бұрын
Very nice! Glad it helped.
@louisviciedo Жыл бұрын
This video is awesome. I am so thrilled I can now setup my cams without flashing the firmware after multiple fails!
@ThisSmartHouse Жыл бұрын
I am so happy it helped!!!
@jc_tuba24 11 ай бұрын
This worked perfectly! Thanks for the video.!!
@TDHobbies 5 ай бұрын
Thanks for this, helped me a lot, and YES I did get it working.
@ChrisEckmanumadbro Жыл бұрын
this was just what i was looking for, many thanks
@ThisSmartHouse Жыл бұрын
You are welcome.
@rafalascano Жыл бұрын
Great Job!!! Thanks!
@rishabMehta7 Жыл бұрын
That intro!!!! Love it
@ThisSmartHouse Жыл бұрын
I am glad you liked it (and noticed it). I had the video done on Monday but I wanted to do something fun for the intro. It took me about a day to learn how to do that level of motion tracking with mocha. It was fun and a new skill!
@macmatthews1983 Жыл бұрын
Finally something that works for my Wyze chicken coop camera. Thanks dude. I’m having trouble doing the generic camera integration. I’m not home to mess with it locally, the shows up on the docker part. Thanks again for the awesome video. Update: I was using my nabu casa address for the generic cam. I went back and watched the video again, and I need to use my HA IP address not the camera IP.
@ThisSmartHouse Жыл бұрын
Yep. It is all internal. Good catch! Glad it helps. I love this project, the dev did a great job.
@glenm5679 Жыл бұрын
I've been using a Wyze Bridge Docker container for 6 months now and it's rock solid with my 4 cameras. Before that I used the TinyCam solution on an old Android phone and it was super flakey. Great video.
@ThisSmartHouse Жыл бұрын
I have had it for quite a while as well. But with some of the new features it is so easy to use. Glad you liked it!
@glenm5679 Жыл бұрын
I have it in a standalone docker container, pulling from the cloud so I'm going to set it up directly in HA and pull the feed locally. Thanks for the video.
@daverosenblatt4902 Жыл бұрын
This was a game-changer. While I don't necessarily have an NVR now, this was something I really wanted to have in my HA instance. Being able to view Wyze cams like Ring, in HA, makes for a great almost-security-system. Thanks!
@ThisSmartHouse Жыл бұрын
Awesome! So glad the video was helpful. I am actually working on setting up some Wyze Cams in a Reolink NVR and setting up Frigate on my server. I'm just struggling to find a place to install the Google Coral chip.
@daverosenblatt4902 Жыл бұрын
@@ThisSmartHouse Wow! Sounds like you've got much more 💵💵💵💵💵 your spouse allows you to spend on your HA install than me. 😊 I've only got a 2,400 sqft house, a Ring doorbell and 4 Wyze cameras. What's your overall setup like?
@ThisSmartHouse Жыл бұрын
Ha! The only reason I have so much cool stuff is because I had to start this KZfaq channel to pay for it. 🤣🤣 My wife would kill me if I paid for everything out of pocket. Right now my camera setup I'm transitioning away from my ring stuff to Wyze, Reolink, and Eufy. But those are the brands I work with heavily so I get a lot of different things from them. If my neighbors didn't know I did KZfaq they probably think I'm a weirdo for how many cameras I have around my house.
@TenshiTV Жыл бұрын
Please make a follow up video on how to use MQTT and motion detection using this docker on Home Assistant. Thank you!!!
@KBCBMaintenance Жыл бұрын
Thank you! This is awesome. Wish I would have known this before flashing to the rtsp lol
@ThisSmartHouse Жыл бұрын
You can use it with the flashed rtsp firmware. You'll just be behind on any new features.
@KizmetEnigma Жыл бұрын
@@ThisSmartHouse I did that already before I found this. I even put that openip firmware on a couple v2 cams. I couldn’t get my battery outdoor cam to work, which is how I found you. This is better than flashing them to rtsp firmware or OpinIP
@randalter Жыл бұрын
Great video! Enabling the RECORD_ALL option in the bridge also saves the video streams in 60sec segments to /media/wyze/cam-name which can be accessed through HA's Media/Local Media menu.
@ThisSmartHouse Жыл бұрын
Thanks for the info!
@johnqpublic9074 Жыл бұрын
Is there a way to limit the amount of storage used, and have it record over again?
@randalter Жыл бұрын
@@johnqpublic9074 I don't think so, not without using a separate app.
@troybos Жыл бұрын
How do you enable the recording function within the bridge? I don't see any settings in the config tab.
@CaseyHeater Жыл бұрын
Thanks!
@ThisSmartHouse Жыл бұрын
Wow! Thank you! That is my first super thanks!
@woolfy02 4 ай бұрын
Very cool! Im hoping to setup this either on 'Home Assistant' (I' haven't tried that program yet) or something else via my PI 4. I would like it to run it as a NAS and record Wyze cam video but, idk if the PI cpu could handle all of that. lol. Docker seemed to run good though on it.
@gnospanker Жыл бұрын
Wow this works great! One question... I'm worried about CPU performance impact (running a RP4/8GB). Is there a way to not include ALL of the cameras on your Wyze account? I have 8 cameras but really only want 3-4 inside HA. Thanks!
@empty177 10 ай бұрын
can you make a video showing h ow to doe the docker version of adding in the wayz bridge onto home assistant?
@jwspiker 9 ай бұрын
Is this still the best way to integrate wise cameras with home assistant?
@csamulski Жыл бұрын
Been really enjoying your channel, great video. I have been following Wyze Bridge for a long time as well. I have wanted to Integrate it with Frigate. Is that on your list of videos? I for some reason can't get the docker to run.
@ThisSmartHouse Жыл бұрын
So happy you enjoy the channel! I have been meaning to look at Frigate, but haven't had a chance. Which doctor container are you having issues with? The wyse one?
@csamulski Жыл бұрын
@@ThisSmartHouse its the Frigate container. I have been looking for alternatives to Blue Iris, ideally containerized. Really want motion detection with AI ideally. All the videos I am watching make the setup seem easy but I am just missing something. The log is saying I am missing a config file, but I am at a loss.
@mamadani420 Жыл бұрын
Really good video. Is there a way wyze cam integration directions with blue iris can be added here.
@ThisSmartHouse Жыл бұрын
It should be pretty easy. You just need to add the RTSP streams to your BlueIris. I will see if I can make a short about it. Good idea.
@arieloflame 11 ай бұрын
Sucks outdoor battery wize cams are not supported. Great video. Thanks
@Runescape. 4 ай бұрын
If you run docker + this conversion tool on a home PC, how much CPU and RAM is it actually going to use up? seems like it might not be a good choice on a home PC where resources are already taxed.
@louisviciedo 3 күн бұрын
Looks like this changed with the June release. anyway that you can refresh?
@jalejandro0211 8 ай бұрын
Hi, one Q, the Wyze cam have a motion sensor, how can I configure to use it?😊
@zg5884 Жыл бұрын
Great video! I was able to get the video to stream but I'm not getting any audio. I did click "Enable Audio For All Cameras". Is this normal behavior or am I missing something?
@brandonfertig 4 ай бұрын
Is this a viable solution if I only intend to use battery power and primarily for motion?
@vetsus3518 Жыл бұрын
so i only have the doorbell camera at the moment... setup was fairly simple by following your video... however.... the doorbell image comes in at 90 degrees to the left.... i also notice i'm using a newer version than you are.. the doc does say how to change the rotation..... but maybe i'm not understanding... how exactly do you implement that so the camera would be rotated to the right 90 degrees which would make it upright in portait mode...?
@Gibber178 Жыл бұрын
Great video, and very timely! I just received an email notice from Wyze that they will be making 2FA mandatory in the near future. I recalled having just seen this video that referred to how to set up 2FA for the bridge so I came back for a quick refresh. A big help! I have a couple of questions: Do I have to update the verification code in the /config/wyze-bridge/mfa_token.txt file every time I log into my Wyze account and get a new code? Why does the bridge need to access the Wyze servers if it is operating in LAN mode? Thanks.
@ThisSmartHouse Жыл бұрын
Glad you like the video! 1. I don't think you have to update it each time. Once you use the code it exchanges an OAUTH key that the bridge will keep using. You might have to update it periodically. 2. Because the fallback method is for it to pull a stream from the cloud if it cannot intercept the local stream. I assume I also needs it to find the source of the stream on your local network.
@Ricardo-xc6wd Жыл бұрын
Is there a way to resize the cam's cards on the dashboard ? Thank you.
@matthewgutz Жыл бұрын
Thanks for the tutorial! Do you have recommendations on what app works with this for basic motion detection? I don't care about AI right now
@ThisSmartHouse Жыл бұрын
A couple that come to mind are Motion (Linux) and BlueIris (Windows). I have used both and most recently BlueIris as an NVR.
@kellyq21 Жыл бұрын
This is exactly what I have been looking for to consolidate the proprietary Wyze streams into a standard RTSP server for connecting off-the-shelf viewer apps. My problem is that I got as far as installing Docker for Windows and adding the mrlt8 container, but running it has thrown all types of errors that I am lost to resolve. I have no experience with Linux or containers. Is there an ELI5 somewhere with baby steps for getting the container to work in Docker for Windows?
@dwj81 Жыл бұрын
Is there a way to have it turn them all on/off at set time of day? I'd like to have all the inside cameras off when I'm home.
@codefallacy Жыл бұрын
hey man huge fan of your Wyzecam v3 content. quick question. Im unable to flash the official RTSP firmware even though Wyze claims they havent blocked the ability to flash custom firmware. so im leaning towards docker bridge, ive heard of the wyze-mini-hacks project as well. do you have any experience with the mini hacks? im not sure which offers better quality for RTSP. just curious if you have tried it and what you thought about it.
@ThisSmartHouse Жыл бұрын
Glad you enjoy the videos!! I haven't heard of that project but I will check it out.
@TWong1200 Жыл бұрын
Great video, thank you. Worked for me. Is there a way to feed these Wyze feeds to Homekit?
@ThisSmartHouse Жыл бұрын
That's great! I am not a HomeKit person (Android) but a quick search looks like there is a project to convert RTSP cameras to HomeKit secure: www.reddit.com/r/HomeKit/comments/qmpoku/homekit_secure_video_for_any_rtsp_camera_via/
@TWong1200 Жыл бұрын
@@ThisSmartHouse Yes, thanks! I discovered this after I commented here.
@rayjay1234 2 ай бұрын
Thanks for the video. Very straightforward. I keep getting an authentication error and can’t even get the cameras detected. I’ve tried the API key method (I don’t have 2FA) and I have a simple alphanumeric password.
@ThisSmartHouse 2 ай бұрын
Is the bridge giving you the error or home assistant?
@jimpeterson2593 4 ай бұрын
tells me port 5000 in use. What port should i use instaed ?
@markknight2768 6 ай бұрын
How do I get RTSP feeds working? I am trying to get my 6 V3 cams and 2 Pans to work with RTSP as internet goes down often in the part of the world I live in. Nothing happens when I click on the RTSP under the Video Streams but the RTSP Snapshot works fine? I take it I am missing a step in my setup?
@kevin_m_carman 11 ай бұрын
I am still SOOL, as Wyse is identical in every ay to the Roku cameras, doorbells, floodlights, etc. that you get at Wally's. Any way to do this with the Roku equivalents. I bought the Doorbell ant THEN found out about HA, Love HA for my lightbulbs (FEIT from wally's and some Geeni ones that I can use through Tuya. My cameras are not found. Oh well, as I said SOOL.
@dougbillings Жыл бұрын
Hey! I used to work for VMware :D
@ThisSmartHouse Жыл бұрын
Awesome. I have been a long time user. Got this shirt at a VMUG. I still wear the shirt I bought back at VMWorld 05.
@mc_allstar4860 Жыл бұрын
Ha Ha VMware Shirt. Love VMware and virtualisation.
@RedneckCanadian 2 ай бұрын
Hi How can I add my Wyze floodlight 3 camera to my fire stick
@ddub78 6 ай бұрын
Hey there, great video. I got everything set up until I tried to integrate the generic camera. It keeps "timing out". I checked http link for the still image in the browser and it works. The rtsp link I copied directly from the camera in web ui. I left the username and password empty (no 2fa). Any ideas? Thanks!
@joerice7363 2 ай бұрын
Just for clarification is it best to run home assistant from within docker or to run docker in home assistant? I'd appreciate a clarification pus a review of the pros and cons ...thanks
@ThisSmartHouse 2 ай бұрын
For most users I would recommend running HAOS on either a dedicated virtual machine or hardware. Then you can install the portainer community add-on and install any docker containers within Home Assistant. This will let you use add-ons from home assistant and have the flexibility of installing additional docker containers like homebridge. I feel like this is maximum flexibility with a minimum learning curve.
@Bacardibombillo Жыл бұрын
Does it work with new Wyze OG? New update 4/22/23. ???
@hmgomez1977 8 ай бұрын
I cannot get the cameras to work on rtsp. Am I doing something wrong?
@bodyguardamerica Жыл бұрын
Any advice on adding the camera to blue iris. I am unsure what settings are needed and have not been able to get my camera to stream in blue iris after several different configuration changes.
@ThisSmartHouse Жыл бұрын
Does the RTSP stream not work?
@andyjochem2153 2 ай бұрын
I need help,LOL! I have been trying to get my wyze V3 to work. I have watched your straight forward video 5 times and I cannot get the image or stream to pull up. I am not paying for the Wyze subscription, I think I had heard this might be an issue?? I can get a snapshot image but it is from 3 days ago and it will not update. I have been able to produce an image but through scrypted and transfer the rtsp url to generic camera and it works through a card but I can't get docker wyze bridge to work. Any thoughts or chats you can refer me too? Thanks
@MrAbsolutesoul Жыл бұрын
Hi do you have video on how to get video from Wyze Cam directly into Blue Iris or you have to go via HA first?
@ThisSmartHouse Жыл бұрын
I do not but you just need to copy the RTSP url for the camera and paste it into blue iris. You don't need to go through HA, just have it pull the video from the bridge.
@paulcampbell755 Жыл бұрын
Great video. Although when I attempted to start the Wyze Bridge Docker it never started. I got a log error: [FATAL tini (7)] exec flask failed: Exec format error. Any ideas? I tried looking it up on Homeassistant's website but found nothing. Thanks! Paul
@ThisSmartHouse Жыл бұрын
Hi Paul, That looks like a docker error. Have you tried running the "Hello World" container to make sure your docker environment is working? hub.docker.com/_/hello-world
@paulcampbell755 Жыл бұрын
@@ThisSmartHouse Thanks for your quick reply. I hadn't run the "Hello World" container. I clicked on your link, signed up for an acct. I ran the command line "docker run hello-world" in my home assistant terminal which appeared to work well. But when I tried to start the Wyze Bridge Docker it didn't start. I got the same error. I am clueless. Thanks, Paul
@BryanSeitz Жыл бұрын
For some reason my v3 pros don't stream very reliably to the HA interface but work fine in the Wyze app :(
@ThisSmartHouse Жыл бұрын
I have the same experience. I think it is wifi strength. There are a ton of devices in my 2.4ghz range.
@michaelmenzie2806 Жыл бұрын
Great video!! so i installed mine right on my Home Assistant instance using the addon. now everytime it updates i get an error when i try to update it. something about too many calls? if i keep trying over the next few days, it eventually updates. anyone else having this issue?
@ThisSmartHouse Жыл бұрын
Have you checked the issues tab on the GitHub? I usually search there when I get a weird issue.
@michaelmenzie2806 Жыл бұрын
@ThisSmartHouse yes and I even opened an issue and he said because I am running on HA instead of a docker using compose he wasn't sure how to help
@edwardjurkowski3521 Жыл бұрын
Hello. Nice video. I'm running HA on a Virtual Box VM. I have the Docker Wyze Bridge installed and running. I opened the Web UI and all my cameras were detected. I need to rotate the door bell cameras. I don't know how to implement the configuration. I'm new to all this... 🏠 Home Assistant - Use CAM_OPTIONS and add a new entry for each camera: - CAM_NAME: Cam Name AUDIO: true - CAM_NAME: other cam AUDIO: true
@ThisSmartHouse Жыл бұрын
Here is the setting for rotation: github.com/mrlt8/docker-wyze-bridge#rotate-video To set these in the Home Assistant add-on, you just go to Add-ons > Wyze Docker Bridge > Configuration (tab). Then scroll down to the text box and paste the settings in there. Hit save right under it.
@BroManDudeGuyPhD Жыл бұрын
I set mine up and it was not booting the service. Did a system restart and it works now :)
@ThisSmartHouse Жыл бұрын
That is strange. But you know the first question we ask in IT, Have you restarted?
@BroManDudeGuyPhD Жыл бұрын
@@ThisSmartHouse oh 100%! It just never comes to mind when I’m trying to fix MY problems! 😂 Wyze Bridge is great though! Thanks for the video
@ThisSmartHouse Жыл бұрын
I am glad you got it sorted! It is really powerful and makes the Wyze cameras that much better.
@M4A1Nerve 11 ай бұрын
My webui won’t pull any RTSP link. It just doesn’t exist. Can’t clink, can’t copy, nothing. So then I can’t get Generic Camera to connect to anything.
@amaraamar9031 10 ай бұрын
We ended up exchanging this model for the slimmer version kzfaq.infoUgkx0jZ_lGlDVJhDnmagEU8gn47cmfPNlLQU because it was too wide for the only door trim area that made sense to mount it on. However, we should have just noted the dimensions prior to purchasing. Otherwise, we love the doorbell. It works perfectly, and the video is very clear, even at night.
@spug68 Жыл бұрын
This works great when on home network, do the camera's become not available when you are outside your home? My setup is with Nabu Casa, and when I am at home the connection is on the local network, and everything seems to work great. But when I come off the home network when I am at work, the camera's become unavailable.. the stream spins and spins... and on my IOs device it says Media could not be loaded, either because the server or network failed, or because the format is not supported.
@ThisSmartHouse Жыл бұрын
Everything works the same when away. Home assistant is accessing the cameras locally. But then it will serve you the stream when you are away. Could it be a bandwidth issue? Your upload speeds?
@spug68 Жыл бұрын
@@ThisSmartHouse It’s the weirdest thing, if I am not at home, and I try to use the IU, I get nothing on 5G or another Wi-Fi. But the Camera I setup using the Generic Camera RTSP Stream as shown works perfectly! I’ll keep playing around!
@zyante1 Жыл бұрын
I need the basic beginner version of this setup
@ThisSmartHouse Жыл бұрын
What are you struggling with?
@jeffreychow8853 Жыл бұрын
What happens if the internet connection drops? I’m looking for a inexpensive, mostly offline option for my van. I have internet, but depending on where I am, it can drop out and I’d still want the cams to work locally.
@johnpeters6147 Жыл бұрын
These cameras are trash without internet connection. RTSP consistently drops out every minute or so and takes another minute to get back online, which I am sure Wyze does by design.
@ThisSmartHouse Жыл бұрын
I definitely tell people not to use these as exclusively RTSP cameras. These are great if you want to use the app primarily, but then occasionally view via RTSP.
@mikekushner1700 Жыл бұрын
whenever i try to save the generic camera setup i get "timeout while loading url" for the stream source and for the still image. any ideas?
@ThisSmartHouse Жыл бұрын
What version of HA are you on?
@shrimpinpat 5 ай бұрын
It was working i get 502 bad gateway or messages that its not running. I have reset it up and still no bueno.
@ThisSmartHouse 5 ай бұрын
Are you using the home assistant add on or running in docker? Do you see any errors in the logs?
@TDHobbies 4 ай бұрын
I bought a new camera, added the camera to my account with Wyze and it is not just showing up in Wyze bridge. What do I need to do to add the camera? Wyse Cam Pan v3 (it was on sale, I should have got the regular one, this thing tracks everything moving!!!) I did restart the bridge, nothing in the logs says it sees the other camera. Thanks
@ThisSmartHouse 4 ай бұрын
The Wyze Pan v3 is supported. Did you set up the API key (this is a new option)? Is the camera and the bridge on the same network? You can turn off the motion tracking. It is a bit much, I agree.
@TDHobbies 4 ай бұрын
@@ThisSmartHouse cameras and bridge are on same network, I searched how to create an API key and there is one, but I don't know what to do with the key. LOL Should I delete that original key and create a new one? I am using the cameras to monitor 3D printers and want it on Home Assistant, and I am new to home assistant. I edited the Yaml file in Wyze bridge and added the API ID and Key, it changed to orange so I guess that means it's working, and after that on the web UI there is now a spot for them, I deleted and created a new key, the one camera shows up, but not the other, BTW they are showing up on the phone app. If I find out what I am doing wrong I will let you know, meanwhile if you think of something, please let me know. Thanks,
@TDHobbies 4 ай бұрын
@@ThisSmartHouse The solution was easy, we both should have thought of if, especially you. LOL SOLUTION within the plug in settings I logged out of my Wyze account and back in, the way I did it was change my username to something wrong, saved, then changed the username to the right user name, logged in and all the cameras showed up. I couldn't find how to log out. Anyhow if anyone else has that issue when it's all working and you buy another camera., just log out of the Wyze account and back in! Thanks again for the help on all of this
@michaelcooper5490 Жыл бұрын
Hey there I was looking for the link you had on the screen but it states it's not working anymore. Is it down for good?
@ThisSmartHouse Жыл бұрын
Which one? This one? tshouse.link/wyzebridge Some of my older links have occasional issues. Just try it again. Or I can give you the full link.
@michaelcooper5490 Жыл бұрын
Thank you sir. Merry Christmas to you and your family.
@ThisSmartHouse Жыл бұрын
Merry Christmas 🎄 to you as well!
@pjuhl2313 Жыл бұрын
Do you happen to know how to rotate an image 90 degrees? The doorbell cam is on its side for me.
@pjuhl2313 Жыл бұрын
Nevermind, found it under hidden options
@ThisSmartHouse Жыл бұрын
You think that would be a common setting to change. 🤷
@pjuhl2313 Жыл бұрын
@@ThisSmartHouse right? Or just make it automatic if it's the default for it to be on the side
@mza9738 9 ай бұрын
Is it possible to connect wyze camera without the wyze account?
@ThisSmartHouse 9 ай бұрын
No. You need the account in order to use the docker bridge.
@oriongamingtv1401 Жыл бұрын
ugh i just bought the nabu casa subscription now my camera IP's changed and they dont work :|
@ThisSmartHouse Жыл бұрын
Those shouldn't impact each other. So you're saying the bridge can no longer see the camera?
@markfisher2090 Жыл бұрын
The cards themselves don't update, correct? I have to click on the cards to open the stream to get a live view. Any way to make the cards update periodically? I assumed this was a frequency, but guess not?
@ThisSmartHouse Жыл бұрын
You mean the image thumbnail? You have to change a setting, see here: github.com/mrlt8/docker-wyze-bridge/wiki/Advanced-Option#snapshotstill-images Set it to something like SNAPSHOT=RTSP30. You set this on tht config tab for the addon if uding home assistant.
@markfisher2090 Жыл бұрын
@@ThisSmartHouse Thanks. So is there a way to get a live stream on the Dashboard without clicking to open the stream? I see my cameras but they all say "Idle". When I click on them, I get the live stream.
@ThisSmartHouse Жыл бұрын
You want video playing live on the dashboard? Might try this: www.reddit.com/r/homeassistant/comments/w27dz8/live_play_cameras_cards_on_dashboard/
@markfisher2090 Жыл бұрын
@@ThisSmartHouse Found the answer there. Can edit card and change to live. Thanks!
@Quazee137 Жыл бұрын
Any way to stream to VLC on any system?
@ThisSmartHouse Жыл бұрын
Just copy and paste the RTSP link into VLC and you should be able to watch the stream. You can find the RTSP stream in the web app for the Wyze Bridge, under each camera.
@oriongamingtv1401 Жыл бұрын
any idea how to rotate doorbell camera so its the correct rotation?
@ThisSmartHouse Жыл бұрын
You just need to add the option to rotate: github.com/mrlt8/docker-wyze-bridge#rotate-video
@oriongamingtv1401 Жыл бұрын
@@ThisSmartHouse im so lost where i need to add it
@ThisSmartHouse Жыл бұрын
Are you using the home assistant add on? It is in the configuration tab in the add on.
@oriongamingtv1401 Жыл бұрын
@@ThisSmartHouse thank you! I messed around for a couple hours and finally figured it out! Thank you so much your videos are super helpful to a noob like myself
@ThisSmartHouse Жыл бұрын
Awesome! I am playing around with the doorbell so I just had to do the same thing. I am so happy the videos were helpful! Let me know if there are any other videos that you would like to see.
@phnx22 Жыл бұрын
When i start the addon all my camera when offline in wyze app and i can access the rtsp the second i close de addon the camera when back online??
@ThisSmartHouse Жыл бұрын
Is the bridge connecting using the cloud or p2p?
@phnx22 Жыл бұрын
@@ThisSmartHouse i am using any
@ThisSmartHouse Жыл бұрын
How strong is your wi-fi? I know it puts a bit of a strain when streaming continuously.
@phnx22 Жыл бұрын
@@ThisSmartHouse i have unifi ap so is seem to by ok
@kojam1 9 ай бұрын
Says 2FA should pop up in the webui but I cannot get it to. Says as of version 1.8.7 but I just installed 2.3.7 or something like that in Home Assistant yesterday and haven't been able to. HELP!?!?!
@ThisSmartHouse 9 ай бұрын
Have you set up the new Wyze API key? Also there are numerous ways to input your 2fa: github.com/mrlt8/docker-wyze-bridge/wiki/Two-Factor-Authentication
@kojam1 9 ай бұрын
@@ThisSmartHouse Did the key thing but wasn't sure where to put it in my docker-wyze-bridge on Home Assistant. Thanks for replying by the way.
@kojam1 9 ай бұрын
@@ThisSmartHouse GOT IT! Thanks for the help! I figured out how to input the Wyze API in the config file in and now I get the 2FA and can finally see the cams. Now I have to see about getting all the goodies working to make these cameras better than using that dreadful Wyze app. Thanks again!
@Theely 9 ай бұрын
@@kojam1 Can you share how you added Wyze API in the config file? Which config file and what do the config entries look like? The docs mention /config/wyze-bridge/mfa_token.txt but that file doesn't exist yet since I haven't started the add-on because I need this stuff setup first. 😄
@kellyq21 Жыл бұрын
What OS does this run on? What does docker mean?
@ThisSmartHouse Жыл бұрын
Docker is a software that lets you run containers on your computer. Think of them as mini virtual machines that run one program. This way you can set up software quickly without having conflicts. Docker can run on any OS. There is docker desktop on Mac and Windows. But most commonly it is ran on Linux.
@lcarter194 5 ай бұрын
I need some help in deleting the docker file. I have has some ghost of wyze bridge still showing up on my MQTT broker. I have deleted the Wyze Docker Bridge Add on
@ThisSmartHouse 5 ай бұрын
If there are left over records in your MQTT broker then those items probably had the retain flag turned on. I would suggest installing MQTT explorer and connecting to your broker. You can easily delete the left over items from there.
@lcarter194 5 ай бұрын
@@ThisSmartHouse Thanks for the quick reply ,my MQTT Broker listing port still show the WYZE traffic {Message 1106 received on wyzebridge/doorbell/motion_tagging at 10:52 PM:}. I have not downloaded MQTT explorer but i don;t think this will fix this ghosr.
@lcarter194 4 ай бұрын
Well, I have to eat Crowe. It made it go away still learning MQTT broker. Need to find out more about retaining flags.
@ThisSmartHouse 4 ай бұрын
MQTT does take some getting used to. Anything that has retain will stay in the database. But you can delete the entry with Explorer.
@michaelhenderson5098 Ай бұрын
Not working for me. I see others are having problems saving the config. I hope it gets resolved soon.
@ThisSmartHouse Ай бұрын
Is there a bug in the latest version?
@gacolter 7 ай бұрын
What's the Web Ui link?
@ThisSmartHouse 7 ай бұрын
The default port is 5000 on the WebUI. So it should be x.x.x.x:5000, where x.x.x.x is the IP of your docker host.
@RobinBarnhart Жыл бұрын
I'm a super non-techy and I just have Wyze camera's. Can I still use this?
@ThisSmartHouse Жыл бұрын
If you are using home assistant, yes it is very easy to set up. Especially with the new webui. If you wanted to set it up outside of Home Assistant via docker, then it is more involved. Let me know if you run into trouble.
@RobinBarnhart Жыл бұрын
@@ThisSmartHouseThank you for your reply. I don't have home assistant. I just have the Wyze camera's. Actually, I just ordered 2 and will have 1 month free for the subscription. I would love to have a way to discontinue that.
@ThisSmartHouse Жыл бұрын
You can install a micro SD card and the camera will record 24/7. You can access that video via the app.
@RobinBarnhart Жыл бұрын
@@ThisSmartHouse Thank you again. I bought the cards but know that if they steal the camera, the cards go with them. I was hoping these could be used with just the camera.
@ThisSmartHouse Жыл бұрын
That is true. You can set up Wyze Bridge in Docker. This can run on Windows.
@humanrich 8 күн бұрын
7:11 Animorphs.
@John_DaMan Жыл бұрын
CAn i do this without home assistant?
@ThisSmartHouse Жыл бұрын
Yes you can. You can run it as a docker container or on a Linux box. Then it would just output the video stream as an rtsp stream.
@John_DaMan Жыл бұрын
@@ThisSmartHouse thank you
@johnb6014 Жыл бұрын
My cameras keep disconnecting over and over, any idea
@ThisSmartHouse Жыл бұрын
Do you have strong Wi-Fi?
@johnb6014 Жыл бұрын
@@ThisSmartHouse very strong. But they all disconnect at the same time..
@johnb6014 Жыл бұрын
They all disconnect and reconnect at the same time, usually between 10-25 seconds
@momansil 7 ай бұрын
What device are you running My Home Assistant on?
@ThisSmartHouse 7 ай бұрын
I still am running my main home assistant instance on a raspberry pi 4. I do have a thin client that I'm in the process of transferring everything over to. It's the same thin client I featured in that video.
@momansil 7 ай бұрын
Thank you!
@patrickconner3788 Жыл бұрын
OK please dont think I'm Stupid... Can I run this on my computer at home or No... I'm sorry you dont talk about that to much.. I have 25 V3's and 2 V3 Pros and 1 V3 Cam Pan...... I also use Wyze Light bulbs and 2 other Color Bulbs wifi...
@ThisSmartHouse Жыл бұрын
Not a stupid question. You can run docker in Windows. Then you would set up the docker container in the same way. This would let you get RTSP for the cameras. If you want to control the bulbs then you need the Home Assistant addon.
@jjsiegal1 Жыл бұрын
Looks like you need to install Home Assistant First....Yes ?
@ThisSmartHouse Жыл бұрын
No this will run on docker on any system including Windows. github.com/mrlt8/docker-wyze-bridge
@jjsiegal1 Жыл бұрын
@@ThisSmartHouse SEEMS 'Hugely Complicated'... if not using home assistant, what are you using?
@ThisSmartHouse Жыл бұрын
I started by running it on a raspberry Pi with docker but then I moved it to Home Assistant. I don't think you will regret trying home assistant. I do have a video on how to set it up on a Pi.
@jjsiegal1 Жыл бұрын
@@ThisSmartHouse THANK YOU...all I want is 3-4 'outside cameras' that will be viewable from one place.
@ThisSmartHouse Жыл бұрын
Yeah. That is the dream. I think I have 5 different camera vendors in my house and that is all I want as well.
@TismoGaming Жыл бұрын
But it’s not really “live” is it?!
@ThisSmartHouse Жыл бұрын
Depending on the speed of the device running the bridge it's pretty close to live. That's why I typically leave the on-screen display of the time on my cameras so I can always check and see if there's any desync. I know the thumbnails only update periodically.
@TabithaRJohnson Жыл бұрын
Background music is very hard for hearing impaired people.
@ThisSmartHouse Жыл бұрын
Yes, I've gotten that feedback from a couple people and have pretty much eliminated it from all future videos. Thank you for the comment!
@johnrasmussen2940 Жыл бұрын
helpI ???? lost
@ThisSmartHouse Жыл бұрын
What seems to be the problem?
@davidschroeder7345 Ай бұрын
You talk too fast and don't leave content on screen long enough to easily follow.
@ThisSmartHouse Ай бұрын
There is a wonderful feature called speed control and rewind...
@jifchosehismother Ай бұрын
THIS VIDEO IS OUT OF DATE. PLEASE REMOVE
@ThisSmartHouse Ай бұрын
Why is out of date? The install process is still correct and the software is mainly the same. The only real change is the addition of the API key.
@jifchosehismother Ай бұрын
@@ThisSmartHouse exactly.
@ThisSmartHouse Ай бұрын
That isn't out of date because you don't have to use the API key. It is just the better solution.
@glib01 23 күн бұрын
@@ThisSmartHouse I don't see where you explain how to get passed the api authentication screen in the ui.
@jjsmnow Жыл бұрын
Why is the music so LOAD over you voice. Learn how to mix audio correctly, Save time and dont usr music why do U needed it????????????
@ThisSmartHouse Жыл бұрын
This video is almost a year old. I have taken a lot of (more constructive) feedback and removed the background music.
@videocreations27 Жыл бұрын
I am all setup but get this "The media could not be loaded, either because the server or network failed or because the format is not supported" what needs chanbging?
@James-zl1kl Жыл бұрын
Does anyone know if this works with Hubitat Hub? Thanks
@greekboydinos Жыл бұрын
amazing, totally worked for me. note for you guys who have your Home Assistant set up with a duckdns address: when adding the cameras to the lovelace dashboard, it only worked for me when using the IP address format (e.g., rtsp://192.168.0.255:8554/driveway-camera). thanks again @this smart house
BlueMonkey 4n6
Рет қаралды 465
Automate Your Life
Рет қаралды 61 М.
Wanderer001 Reviews
Рет қаралды 67 М.
Natali Skorlupkina
Рет қаралды 5 МЛН
BossHorn - Train Horns with Remote Control
Рет қаралды 120 МЛН