The hull cleaning process & the most modern machinery and technology help clean the hull effectively

Рет қаралды 1,915,279

2 жыл бұрын

Ships after a long time operating at sea, their underwater bottom will be invaded by seaweed and other marine microorganisms. They attach to the hull, propellers and many underwater parts of the ship, reducing the ship's performance, most notably reducing the speed, increasing the cost of oil fuel to operate the ship. According to many statistics, the speed loss is 30% of the rated speed, so the fuel oil consumption increases accordingly. Regular underwater cleaning of the vessel makes it possible to restore the original speed by about 95-98% and reduce the cost of fuel oil, which, as a rule, accounts for almost half of the operating costs.
-----------------------------------
X-Machines Channel
Website: www.xmachines-co.com/
Fanpage: / x-machines-10949018502...
SUBSCRIBE: bit.ly/3e8Hz7t
We would like to support all companies or people to promote their products, service, or company. If you need our support, don't hesitate to contact us via email wowtv2050@gmail.com.
If you are a copyright video owner and don't want us to use it in this video, please contact us via email wowtv2050@gmail.com. We make sure to remove your video immediately.
Thanks for your co-operation.
-------------------------------------
Disclaimer: X-Machines is not affiliated with the businesses whose products are shown in this review. Any trademarks depicted are the property of their respective owners.

Пікірлер: 194

@user-js4zx1lr2u 2 ай бұрын

Good trick to remove and replace the bow thruster in the water. Nice rigging job.

@forward_ever_ever2595 Жыл бұрын

Full respect for those doing that....thats a colossal amount of work

@NS-ex6cm Жыл бұрын

Colossal, not collasal.

@forward_ever_ever2595 Жыл бұрын

@@NS-ex6cm thanks mate

@cameron3991 Жыл бұрын

Not when you have 2 or 3 crews in the water with 3 divers per crew and 1 safety per diver. They do a of of other maintenance while it’s docked like HVAC / Plumbing / Electrical. They usually dock cruise ships that are over 200ft. Once for 6 months every 4 to 5 years.

@wallerstc Жыл бұрын

@@forward_ever_ever2595dude, not mate

@r.awilliams9815 Жыл бұрын

What the video didn't mention is how astonishingly bad that job stinks. You get a ship into dry dock, it sits out of water in the sun and all those barnacles and other critters on the hull die and begin decomposing, and then you come along and start scraping the mess off...it's a stench you'll never forget.

@robertlevine2152 Жыл бұрын

It is important to note that many ports no longer allow in water cleaning of hulls. There are concerns of the release of invasive species. There are also concerns that during the in-water cleaning of hulls biocides contained in antifouling paints will be deposited in local waters.

@iuliandragomir1 Жыл бұрын

Is exactly what I wanted to say

@jasonantigua6825 Жыл бұрын

Makes sense! Thanks for the information

@albertoghirlinzoni6631 Жыл бұрын

Buon Abbigliamento wè

@dongningprc Жыл бұрын

Talking about "the release of invasive species", I doubt by not allowing in water cleaning of hulls, invasive species will not move by themselves into the water near the ports. Are there any scientific evidence that in water cleaning is helping them migrating?

@robertlevine2152 Жыл бұрын

@@dongningprc I have, since retirement, been following this topic from the periphery. I have not been active in discussions with people from paint manufacturers, diver companies and State environmental agencies. In the assessment of actual harm it is often a "shoot first, ask questions later " mentality. It becomes easier to seek an alternative solution, than to spend the time and effort to disprove the hypothesis that harm is being done. Self-publishing copolyermer paints and other ablative paints provided a solution for the issue of in-water cleaning 15 years ago. I can't tell you what alternatives are being used today. Bob

@vientran3861 2 жыл бұрын

Thanks for your video and people to maintain the ships

@X-Machines 2 жыл бұрын

Cảm ơn bạn đã để lại bình luận

@prateekgemawat8017 Жыл бұрын

Very nice, concise and informative video. Great work 👍

@BackyardBeeKeepingNuevo 2 жыл бұрын

I now know what it will take to clean a ship’s hull if I ever end up owning a ship.

@barryrahn5957 Жыл бұрын

Very satisfying watching all that crud come flying off.

@billwalker790 Жыл бұрын

Interesting, have they gone to Teflon coating or can it be done?

@a-fl-man640 Жыл бұрын

nice video, music wasn't overbearing and didn't interfere with the narration, good job. subscribed

@mojoden Жыл бұрын

Are you deaf?????

@charlesspringer4709 Жыл бұрын

Nice work. Feed Wikepedia to a computer voice and put together other people's clips to sort of match. It works.

@X-Machines Жыл бұрын

Thanks so much

@healthytalk666 Жыл бұрын

Ship cleaning! Looks satisfying .....

@fredgervinm.p.3315 2 жыл бұрын

I have cleaned my share of hulls and painted them with TBTF paint...

@snoopiedadawg5920 Ай бұрын

The vertidrive is such a good boy 🥺

@hoof2001 Жыл бұрын

2:40 is not a propellor: it’s one of the ship’s thruster units

@TheRoostersGarage Жыл бұрын

And I don't think it was removed for cleaning, that looked like a failed unit being replaced

@gerardboorsma3418 10 ай бұрын

Bow thruster

@Woody615 8 ай бұрын

@@TheRoostersGarage I was thinking to save time, they were removing the entire unit and replacing it with a different one. Then they take the old one and refurbish and renovate it and install it on the next ship.

@TheRoostersGarage 8 ай бұрын

@@Woody615 That would be a good option! It's not like any of this stuff is cheap, so I'm sure a lot of the components get rebuilt many times.

@user-kj7uy5lj2x 2 ай бұрын

Lha yp loe keta kete iso ponter ning ameroca iyo memang koe pinter.thankyoi very much

@gvanys Жыл бұрын

I would like to know the cost for this service and how long it takes.

@DanBurgaud 4 ай бұрын

4:16 I LIKE THIS! NICE!

@cohall46 2 жыл бұрын

Very interesting.

@X-Machines 2 жыл бұрын

Glad to hear that.

@capnchip Жыл бұрын

Pretty interesting. Too bad thee camera is switched around so much it is almost impossible to actually see what is taking place.

@alexgomes8351 7 ай бұрын

Great video brother. I just loved it!

@BeeRich33 Жыл бұрын

That's not a propellor. It's a bow thruster.

@davidbwa Жыл бұрын

The device being used to create that thrust is literally a propeller. It wasn't an airplane either but many of those have propellers as well. From the internet - "What does bow thruster do? In simplest terms, thrusters are designed with propellers facing in a sideways direction so when they are turned on, they push the bow or stern of a boat sideways through the water, in either direction"

@BeeRich33 Жыл бұрын

@@davidbwa Not around boats much I see. Take your grade school lecture elsewhere, kid.

@paulreilly3904 Жыл бұрын

Looks like a duck, walks like a duck.... 😁

@buddtwin2 Жыл бұрын

I mean he also said seaweed is going to attack the hull lol so I’m not surprised by the inaccurate description

@06blackflhxi Жыл бұрын

but the bow thruster has a propeller

@MrCarlosMRLima Жыл бұрын

Quem apresenta este tipo de vídeos, como se tratasse de algo extraordinário, até me dá vontade de rir, porque quando há bastante mais de quarenta anos entrei para os Estaleiros Navais da Setenave em Setúbal - Portugal, já todo este tipo de tecnologia para reparação e manutenção de navios era usada, incluindo a utilização de "dock arms" para permitir um fácil e rápido acesso a qualquer parte do casco do navio!!!

@oumardiallo9564 4 ай бұрын

Formidable

@deejaytrizay Жыл бұрын

I hear this same voice in a LOT of videos. It, ofcourse, sounds synthetic, but...where do ppl get this voice from?

@X-Machines Жыл бұрын

Thanks for your valuable comment. X-Machines is trying every day to create interesting and useful videos for viewers. Recently X-Machines got new narrators. Could you take a moment to watch these videos and give us your opinion on these narrators kzfaq.info/get/bejne/gN1llK6ruqqmgYE.html kzfaq.info/get/bejne/nql0qsmHq66WZqM.html

@radoanazad4535 Жыл бұрын

Alhamdulillah Thanks for you your all video very nice I like you I love you

@edgarcruzsr9695 2 жыл бұрын

love this stuff!

@X-Machines 2 жыл бұрын

Great

@tanjogok 2 жыл бұрын

Memang bagus sekali

@markpinther9296 Жыл бұрын

Music sounds like a symphony of dead animals.

@tbusman1 Жыл бұрын

What shipyard was this filmed at?

@floydwilliams3321 Жыл бұрын

Interesting

@aquious953 8 ай бұрын

The best method is Lazer blasting. It is amazing.

@rickherman4539 Жыл бұрын

good video . I liked it

@sunitadwarka347 Жыл бұрын

Each problem has different solutions. Another system is engineer must make heating systems of propelar, must discontinue wiring from inside use rubber where ever needed and heat it . All dust will seprate. Second system is must use hot water drops by drop water system connection to pass on propeller. Must experiment which method is best. While making machenical limbs for ships, we must make arrangements for cleaning. Like we can make mechanical limbs with hot water pipe material and we pass hot water time to time inside hot water pipe, so that nothing will get stuck to it. Jay shree ram. Shipping industry will completely change in future. Not the original structure but problems will be solved. Not returning from sea bring tears in eyes of family members. Jay shree ram.

@arkel312 Жыл бұрын

1991 rok stocznia Polska Szczecin Gryfia. Pozdrawiam wszystkich z doku nr 5. To były czasy...

@RedArrow73 Жыл бұрын

They should try Cleaning Lasers.

@marcobobson5972 Жыл бұрын

How much does this job cost? Clean and new paint.

@gguthary1 Жыл бұрын

Can't stand robot voiceovers.

@X-Machines Жыл бұрын

Could you please watch our newest video with new audio and give us more comment. kzfaq.info/get/bejne/gN1llK6ruqqmgYE.html

@makewithmegma Жыл бұрын

🔥💕👍

@patriot-wf1er Жыл бұрын

Horrible background music I shut u off half way

@paulcheney3636 Жыл бұрын

I've lost count of the amount of hours I have spent blasting off old paint barnacles etc. The blasting gun was powered by a volvo truck engine and the power is incredible. The noise is deafening and even with eye protection I've had to go to hospital maybe 8 times to have a foreign body taken out. The paint below the waterline is very poisonous and as it's washed off there's a paint coloured mist in the air. I've had shadows on my lungs twice and as soon as doctors see you've worked with marine paint they pay attention. Your health is precious and no amount of money is worth it

@hassamtv4152 3 күн бұрын

❤

@Broody-cq2yl 5 ай бұрын

Bunch of barnacles must be waiting right out side the maintenance yard for fresh surface😂

@tinderbox218 Жыл бұрын

0:59 Trypophobia triggered

@sunitadwarka347 Жыл бұрын

My another suggestion is, Make holes in the propeller fan arms. Take longer screw with rubber vayser . Cut the rubber sheets as per as size of propeller fan arms for both the sides ... or make cover with rubber sheets to wing of propeller. With screws you fix rubber sheets use rubber vayser to tighten it, After every fifteen days, you change the rubber sheets by opening screws. It will be very easy work. You keep it for drying all dust will seprate automatically. Till hot water system is not coming use this system. Screws will propeller fan arms rubber. Jay shree ram.

@glennsoucy4359 4 ай бұрын

Idiotic

@gajananphadte3440 Жыл бұрын

It is called Bow Thruster.... not propeller at 2.40

@iqbang9236 Жыл бұрын

I was wondering how much each cleaning + repaint job would cost for the big ships? Probably millions?

@thesausage351 9 ай бұрын

The cost of the dock plus the workers would be phenomenal.

@TheSafetySmith Жыл бұрын

Honestly, I thought there were bigger robotic systems for a dry or semi dry dock cleaning

@AlexanderVadura 29 күн бұрын

In wechen Abständen muss das gemacht werden?

@soldtobediers Жыл бұрын

You can drive out nature with a pitch fork But it always comes roaring back again

@richsmith3300 Жыл бұрын

In other words a constant supply of work and money😁

@ruffnersedurifa7226 Жыл бұрын

@1:48 what is that equipment?

@felixthecleaner8843 Жыл бұрын

09:30 are those 'Sacrificial Anodes'?

@TheRoostersGarage Жыл бұрын

1:50 "minimal impact on the hull" - That thing was stripping the bottom paint off with the barnacles and took it down to bare steel!!

@yehiaselim3774 Жыл бұрын

ما هو السعر

@sqishybananananana4271 Жыл бұрын

The video: *cleaning a ships Hull* My daughter who knows what she likes: Tugboats!

@carloschicue2608 2 жыл бұрын

Cuanto vale un barco así de gigante por hay 2 millones de dólares

@powerofone1645 Жыл бұрын

I don't even own a multi million super tanker and I watched this.............. :)

@michaelburns8279 Жыл бұрын

Very interesting, except the mechanical voice and awful music really distracted from the video

@Rick-tb4so 5 ай бұрын

What's the cost for a super tanker?

@russianfish_VVO 4 ай бұрын

Кутое видео ❤

@sunitadwarka347 Жыл бұрын

I want you to do one experiment with propeller, You take coconut rope and conver the propeller fan body with ropes, you cut the rope and put another rope each month, after sometime we will find some new method to cover propeller body. First experiment with this. Jay shree ram.

@rp1645 2 жыл бұрын

I remember those old B&W films of the PT-Boats, in wooden stays. The crew let the tide go out. Then worked hard on cleaning hull. And repair of bullet holes. I see so mean NEW boats at boat shows. With no paint on our drive. Or the bottom painted. New owner has to add that into cost. If boat is left in SALT water. There is NEW bottom paints coming out for large ship.

@X-Machines 2 жыл бұрын

This video is different.

@seevalidedigama6525 2 жыл бұрын

@@X-Machines 7ㅈ77

@davidmarshall4971 2 жыл бұрын

@maeln5425 Жыл бұрын

SIMA servicios industriales de la marina.

@luigicristiani7709 Жыл бұрын

v Forgive me but the speed of editing the images gives me a headache!!! Too short time between shots!!!

@darktoadone5068 2 жыл бұрын

Looks like a very labor intensive job and a hot and sweaty one also, just imagine when they are doing this in the summer. If you're out of shape, not a job for you.

@mannyfernandez6860 2 жыл бұрын

thats the easy part actually..The tough drydocking jobs are inside those hulls.

@Lifeindrydock Жыл бұрын

Trust me it is Imagine it's wat I do in the gulf currently

@wdwerker Жыл бұрын

I enjoy this type of video but the computer voice is awful !

@X-Machines Жыл бұрын

@petercrossley1069 Жыл бұрын

“Reduce the damage that damages the propellers”. Who writes this gobbledegook?

@AbdulHafeez-cq6oo 3 ай бұрын

wahhhhhhhhhhhhhhhhhhh

@jeremiahmendez3318 8 ай бұрын

I hope these guys are paid well

@soldtobediers Жыл бұрын

A constant electrical charge should off set any contact growth. No?

@denali9449 Жыл бұрын

And then you must contend with the corrosion problem you created by inducing an electrical charge to the hull. All those shiny silver things on the hull are sacrificial zincs to absorb the stray electrical charges due to dissimilar metals in the salt water. Adding more electricity to the mix will create more corrosion in the hull and fittings.

@TheJimbob1603 8 ай бұрын

Great content ....... but, Robo-voice narrators are a plague on KZfaq!

@Mark-ml2tv 4 ай бұрын

Watching the various fouling removal methods, it is quite obvious that the environmental impact of the uncaptured and uncontained fouling was not taken into consideration.

@Kymcook73 Жыл бұрын

Looks for jobs in hull cleaning immediately after memorized by this.

@richsmith3300 Жыл бұрын

Haha me too

@mkarthik3065 9 ай бұрын

This not propeller from aft. This is bow thruster blade from fwd

@dejupp 2 жыл бұрын

tell me, why tf you have music in your vid? WHY???

@X-Machines 2 жыл бұрын

Is it ok if I have nothing without music or audio?

@dejupp 2 жыл бұрын

@@X-Machines original audio. only original sounds. nobody is interested in your taste in music.

@elconquistador98 2 жыл бұрын

@@X-Machines yes

@alexanderSydneyOz Жыл бұрын

@@X-Machines yes, much better if you do not. Surely you look at KZfaq videos also? If you do you will notice that videos with music in them are the subject of endless complaints. It is even worse when a video like this has a truly bizarre collection of incompatible different music.

@treetop5752 9 ай бұрын

@@X-Machinesmusic ruined this video

@mmoradiointeractive Жыл бұрын

What is the music at 4:43 if anyone knows?

@TheDieselStop Жыл бұрын

Salt water is unforgiving

@collenrevillosa1376 11 ай бұрын

Applay blasting painting mei

@sunitadwarka347 Жыл бұрын

Another method is make rubber body cover for propeller, using velcro or jip chain. Jay shree ram.

@booksteer7057 Жыл бұрын

We can create and launch the James Webb telescope, but they haven't found a way to keep barnacles from growing on a ship?!?

@SoupyOatmeal Жыл бұрын

Another audio robot.

@X-Machines Жыл бұрын

Could you please watch our newest video with new audio and give us more comment. kzfaq.info/get/bejne/gN1llK6ruqqmgYE.html

@AMG63 Жыл бұрын

3.10 that welding is atrocious 😩

@mithunsivan1989 Жыл бұрын

I'm not going to buy a ship !!

@bunkstagner298 2 жыл бұрын

all ads no nothing

@kushikfishtraders.6792 Жыл бұрын

Help me please 😭😭😭

@aglsports2 Жыл бұрын

What's with the annoying music.

@simonmcneilly55 Жыл бұрын

Maximum cringe can’t be achieved without it

@Pietabotha777 Жыл бұрын

Yes, it is really irritating... The video is interesting, but please lose that "music"!!!

@oumardiallo9564 4 ай бұрын

Maximum

@terryhackett2059 Жыл бұрын

underwater bottom=hull

@user-oc5gh9lr4f Жыл бұрын

Just bring a trailer and pull it by tundra

@robertfish6617 2 жыл бұрын

I was enjoying the video, but I had to turn it off because of that fucking horrifying music.

@X-Machines 2 жыл бұрын

I'm sorry about that, I will try to choose better music in other videos.

@deepdiver51 Жыл бұрын

Just don’t put any music at all.

@jasonantigua6825 Жыл бұрын

@@X-Machines Don’t apologise! People should be thankful that you put in the time and effort to bring us these videos.

@kushikfishtraders.6792 Жыл бұрын

Help me please 🥺😭😭😭

@anirbandutta2051 Жыл бұрын

soo many algaes and ol gets attached to them its so shocking to see

@mr.majestic8713 Жыл бұрын

The music is annoying there's no need for it. Thumbs down!

@luigicristiani7709 Жыл бұрын

v editing too short, a few seconds, very few between one image and the next; give me a headache!

@therighttoreply4849 Жыл бұрын

In this video, ye did not cover, ever way, of cleaning, a ship's Hull, with a machine

@SteveJohnson-fy7qr Жыл бұрын

Is this a human voice or is this a goddamn computer?

@thesausage351 9 ай бұрын

Another computer bullshit. Hate them. I’m just going to block them from now on.

@sea_container 5 ай бұрын

👍👍👍. music 🤏☺️

@perdinantmakros3918 Жыл бұрын

they are just promoting their product.

@shashankm8554 4 ай бұрын

Stop music as warranted fr this news

@kaynefryday6637 Жыл бұрын

Whoever can invent a coating that crap Can’t stick to would be rich

@louischannel7008 Жыл бұрын

There are now silicone based paints but they are still very expensive. Nothing sticks to this type of paint not even a 2nd coat.

@sohailwaseem6710 5 ай бұрын

Hello dear sir iam fitter i have 27 years experience in my technical field gove me job