No video
Xbox 360 Zephyr Ext_Clk Tutorial
Рет қаралды 9,125
Күн бұрынHow to RGH / Ext_Clk your Zephyr Xbox 360 Console.
My soldering is better than this. It was mainly to show where the points go. Keep your exposed wire to a minimum and ensure you have nice solid connections.
Timing File / Install Pics Download - github.com/Oct...
Music Used
Track: Laszlo - One Step Away [NCS Release]
Music provided by NoCopyrightSounds.
Watch: • Laszlo - One Step Away...
Free Download / Stream: NCS.io/OneStep...
Track: Electro Light ft. Kathryn MacLean - The Edge [NCS Release]
Music provided by NoCopyrightSounds.
Watch: • Electro Light ft. Kath...
Free Download / Stream: NCS.io/edge
Track: Umpire - Gravity [NCS Release]
Music provided by NoCopyrightSounds.
Watch: • Umpire - Gravity (feat...
Free Download / Stream: NCS.io/gravity
Track: Foria - Break Away [NCS Release]
Music provided by NoCopyrightSounds.
Watch: • Foria - Break Away | M...
Free Download / Stream: NCS.io/breakaway
Track: Venemy ft. Emily Jane - Heartbeat [NCS Release]
Music provided by NoCopyrightSounds.
Watch: • Venemy ft. Emily Jane ...
Free Download / Stream: NCS.io/heartbeat
@Josh.Davidson Жыл бұрын
hi, Thanks for covering EXT_CLK. Few notes: 1) Please beware that CPU gets a lot hotter. You should place the fan another way in case of long glitch to XeLL. 2) XeLL always boot slower, don't worry if boot to XeLL is slow. 3) Music is too loud, distracting. Otherwise good!
@OPUS_TV Жыл бұрын
Thanks for the feedback. The audio plays differently in Shotcut. I adjusted the gain but it must need to go down more. In Shotcut it plays at an OK level.
@popww5391 11 ай бұрын
Hello, please tell me if there is a chance to see the Winchester hack? Or is there work in this direction?
@jamiejump1newchannel190 4 ай бұрын
@@popww5391Winchester is unmoddable
@alexandergomez3186 2 ай бұрын
Excelente , le escribo desde Bogota, me sirvio mucho, para una que resibi y no me fije bien crei que era falcon y ya me habia comprometido con el cliente a hacerle el rgh , y salio todo 👍 👍
@OPUS_TV 2 ай бұрын
Glad to hear I could help!
@Pandabaerchen88 11 ай бұрын
Great movie. I did a xenon with old 8 Dashboard now with ext_clk.
@OPUS_TV 11 ай бұрын
Nice
@MadSharkbite 17 күн бұрын
this method doesnt work on this Service Date 2011 Zephyr. tried 2 different chips rev c & matrix v3. dont know why i even attempted this.
@coenvanduivendijk372 Жыл бұрын
Is there anything special you should do with the cool runner. I see that you need to desolder something on the matrix though would this be needed for the cool runner? Is it important to solder the cap for example?
@OPUS_TV Жыл бұрын
Nope. Coolrunner can stay as it is. No need for a cap either
@vincentondoa4098 9 ай бұрын
thank you for sharing your work
@alnoiseplaysmc 11 ай бұрын
What cable did you use to program the Matrix v3 chip? I can't find any kits that come with the programming cable.
@OPUS_TV 11 ай бұрын
It's one that comes with the xFlasher and JRPv2
@OPUS_TV 10 ай бұрын
@user-gu8pi7dn3h Pin Header is all you need
@JacobJakubPL 3 ай бұрын
And what about Jprogrammer v2? Which cables should I solder/connect, and which should I Solder and also where, to connect it properly to Matrix V3 and motherboard? Tutotial is nice, but not complete.
@OPUS_TV 3 ай бұрын
I'll try and keep this in mind if I do a Xenon guide. Maybe also an updated Zephyr
@JacobJakubPL 3 ай бұрын
@@OPUS_TV Hi Opus. If you could give me a complete information about this, I'll be in your debt. Actually I have old one X360 Zephyr, I want to renew it for my kid, and I don't know what Should I do with this unit and with "EXT_CLK" method. I did RGH3 "fix" for two units of Coronas, works very well, but this is a little too complicated for me, right now. If you can let me know here, in comment, or in PM by KZfaq or Gmail, I would be very grateful. Have a nice day Opus. Best Regards JacobJakub
@RetroMike1985 11 ай бұрын
Great Video! Cheers!!!
@OPUS_TV 11 ай бұрын
Thanks
@AcidzDesigns Жыл бұрын
Well job
@digipimp75 4 ай бұрын
I followed the steps verbatim and can't get my Zephyr to glitch. I've double and triple checked soldering and all looks well. I've even tried removing the 48mhz crystal from the Matrix chip but no luck. Any suggestions?
@OPUS_TV 4 ай бұрын
Without seeing your install and what timing files you've used etc, there isn't much I can suggest here
@callumbmx9763 Жыл бұрын
Stop the music 😭😭
@OPUS_TV Жыл бұрын
🔫
@klokateer4372 Жыл бұрын
@@OPUS_TV it's to happy! , it's missing something repugnant and revolting, it's missing... negativity, this isn't Metal We Were having fun-Metalocalypse 😂🎉. Music starts vibing for me 2 minutes in. That intro is Brutal on the ears though 😅 😂
@EL90291 9 ай бұрын
Mute the f@cking noise/music. Thank you for the tuto.
@ramonromero9180 10 ай бұрын
buen video amigo solo que falto tu vos en el adio y te saltatste algunos pasos creoo
@Ukysseus 21 күн бұрын
Hi, I have a dead Xbox 360 White Fat model, looks exactly like yours with an HDMI port on the back. Could hacking it like this make it work? The console turns on but I can't access the main menu and it directly prompts me with an error message failed to update 13146 (I tried to update with a Fat32 USB stick but nothing happens...)
@OPUS_TV 20 күн бұрын
@@Ukysseus Is there a Hard Drive attached to the console?
@Ukysseus 20 күн бұрын
@@OPUS_TV I bought a 60gb one (officialXbox, the grey ones that go on the top) yesterday, plugged in but it didn't change anything. As I don't own any other Xbox 360 I can't be 100% sure the drive is working but I think so. This type of USB issue seemed pretty common, there's a lot of old comments from 2011 talking about it but none saying how they fixed it (if they even did). That's why I'm thinking about hacking it, could it be done in such conditions?
@OPUS_TV 20 күн бұрын
@@Ukysseus If the console is working fine and you can get to the dashboard. Then yes, you can update it via modding by building a 17599 Freeboot image
@Ukysseus 20 күн бұрын
@@OPUS_TV Mmh the thing is I can't access the dashboard. The console turns on and directly prompts me with the error message. Completely softlocked...
@OPUS_TV 20 күн бұрын
@@Ukysseus Add me on Discord and send me a video. Same username
@TheRealTRENSDEBERROFRSince2022 4 ай бұрын
Does it work on my Xenon from July 2006? Will i would be able to downgrade to any kernel i want?
@OPUS_TV 4 ай бұрын
Yes it works for Xenon but there are a couple of differences. You need to remove the capacitor where the RST point is and the CLK point is different because it uses ANA and not HANA. There are pictures in the official download. You can build any XeBuild providing you have the files to do so
@jeremybaraglia5681 3 ай бұрын
what timing files do suggest for a coolrunner rev c?
@OPUS_TV 3 ай бұрын
It's trial and error really. Try the ones in the Xenon or Zephyr boxes in JRunner first. Chances are one of those will work the best
@alexm2358 Жыл бұрын
what soldering iron do you use?
@OPUS_TV Жыл бұрын
I've been using this one, Works rather nicely for the price - a.aliexpress.com/_msUxivk
@terryc9059 Ай бұрын
I recently took my xbox 360 (zephyr) to a store to make the RGH modification. They returned the console practically useless because they made RGH3 and it never started. They never told me what happened, it was not until I disassembled the console that I could see what they did. Researching on the internet I understood that they did the process wrong because that motherboard does not support the RGH3. I want to know what options I have to recover the console. The last time I tried to turn it on I got the 3 red lights. I really need your help.
@OPUS_TV Ай бұрын
@@terryc9059 If the RGH3 wiring is there, then remove it. Hopefully they wrote back the retail nand dump
@terryc9059 Ай бұрын
@@OPUS_TV Excellent, thanks for the answer, I will remove the wiring. Another question, in case they have damaged the nand, is there any possibility to make it work again by making some modifications or following another procedure?
@OPUS_TV Ай бұрын
@@terryc9059 As long as the NAND Chip and headers are ok, then you can follow my tutorial and install a chip and write over Xell and get it modded / functional again
@terryc9059 Ай бұрын
@@OPUS_TV Hi there, "quick update"; They didn't write back the retail nand. I removed the RGH3 wiring, but nothing happened. I bought a Matrix v3 glitch chip and a Pi Pico to read the nand. If I follow your tutorial, is possible that the Xbox works again? Using a donor nand?
@OPUS_TV Ай бұрын
@@terryc9059 If the console gets successfully recognised in JRunner than you can write Xell straight to it, wire up the glitch chip and hope it boots. You will need to use a fork of the Pico Flasher firmware called dirty Pico. That will allow you to flash the Matrix. When you say "nothing happens" is that no power or it powers on but doesn't boot? If its no power, connect the Pico and see if you can write Xell. Then try powering it on. If it still doesn't power, then something else is wrong and it's not worth the time trying to diagnose and repair it.
@Spookii500 8 күн бұрын
can i use a jr programmer 2?
@OPUS_TV 7 күн бұрын
@@Spookii500 Yes
@itsjok 3 ай бұрын
can you please have videos with xenon motherboard? thank you verymuch :)
@OPUS_TV 3 ай бұрын
I will likely do one. But when that will be I can't say as it's not a priority atm
@vincentondoa4098 9 ай бұрын
please can do it with chip (cool runner)?
@GEEKSQUAD1985 Ай бұрын
can i use rasberry pi pico?
@OPUS_TV Ай бұрын
@@GEEKSQUAD1985 You can use a Pico to read the NAND yes. You could use the dirty Pico fork to flash the Matrix chip. But tbh I would recommend getting a JRPv2 as they're cheap and can do both by default
@bernieiiatacador4683 4 ай бұрын
Can i follow this for my xenon motherboard too?
@OPUS_TV 4 ай бұрын
For the most part, yes. The CLK is different for a Xenon, follow the pictures in the download. You also need to remove the capacitor for RST on a Xenon
@jamiejump1newchannel190 4 ай бұрын
Not a great tutorial, you need to show us where the points are on the board better, not just local area
@OPUS_TV 4 ай бұрын
Will keep it in mind. All criticism and suggestions are appreciated. Thank You
@coolepic-nx7nj 9 ай бұрын
dose it also work on xenon
@OPUS_TV 9 ай бұрын
Yes it does. But the CLK point is different as Xenon uses ANA rather HANA I will make another tutorial at somepoint for the Xenon
@CulexNic 7 ай бұрын
Files ?
@thewavyshopofficial Жыл бұрын
hello
@OPUS_TV Жыл бұрын
Hello there
@jcross72500 2 ай бұрын
Can i use an ace chip?
@OPUS_TV 2 ай бұрын
Yes, you'll need to follow the chip points in the download
@jcross72500 2 ай бұрын
@@OPUS_TV where's the download
@OPUS_TV 2 ай бұрын
@@jcross72500 github.com/Octal450/Timing-Files/releases/tag/Timings
@brauliobarragan6576 7 ай бұрын
zephyr
@OPUS_TV 7 ай бұрын
Yes it is. You're not wrong
@jeremybaraglia5681 4 ай бұрын
Can't build my image.Do you have to write the ecc as a falcon image?Any help would be appreciated thanks! XeBuild Initialized Kernel Selected: 17559 KV Info saved to file Using Falcon type for Zephyr --------------------------------------------------------------- xeBuild v1.15.709 --------------------------------------------------------------- base path changed to C:\Users\barag\Desktop\XBox 360 Files\J-Runner-with-Extras\xeBuild ---- { Image Build Mode } ---- building glitch2 image ******* ERROR: could not find label [falconbl_4574] in file list ini
@OPUS_TV 4 ай бұрын
JRunner will automatically select the Falcon bootloader for Xenon and Zephyr
@jeremybaraglia5681 4 ай бұрын
I got it going thanks!
@Alejandro-uk5qo 11 ай бұрын
🤷 "promosm"