XCAP Connect - The Next Generation in Aftermarket Batteries! No Soldering, Programming, 100% Health!

Рет қаралды 7,091

6 ай бұрын

We are proud to launch XCAP Connect today. With special FPC connections, our batteries allow you to transfer the original BMS to our batteries without spot welding or programming. Our batteries allow the original BMS position to be retained with a sleek and clean design.
Try XCAP Connect out today! Starting with the iPhone 11 series. More models coming soon!
www.injuredgadgets.com/xcap-c...
#bmsbattery #nosoldering #tagon #xcap #XcapConnect

Пікірлер: 60

@SalemTechsperts 6 ай бұрын

To sum it up, - New battery needs to be connected once to get service message - Old BMS needs to be cut off old battery and transferred to new battery using double-sided adhesive - BMS connects to new battery using a connector, then folds down to fit in the space between board and battery, no protrusion. - Device boots up with no service message and 100% health Awesome job as always guys, keep up the work you're doing for the industry.

@bdafonefixguy 4 ай бұрын

great but ive had 2 different fones not work . do it like in video so what else is there to do.

@michaelv1984 2 күн бұрын

Won’t work for me. I’m stuck at 74% no matter what and am pulling my hair out. I replaced the oled and battery on my kids 13 mini and I just wish I saved the money and bought the basic xcap without bms. She’s 13 we don’t necessarily Need to have bms

@jacksonsneed7689 6 ай бұрын

This is great y'all! The XCAP BMS solution has been great, but it is a bit time-consuming, so these are gonna be great! Massive thanks for all of the R&D work y'all have done over the years to bring us these solutions; people need options so they can get more life out of their devices, and I have so much respect for the work y'all have done here and continue to do for the industry. Can't wait to give them a go! Thanks for the demo Brad! 🙂👍🐧🐧

@bradleymcguire7046 6 ай бұрын

We appreciate you also! This was a fun project!

@ronanhewit5218 4 ай бұрын

I just bought the spot weld one, so wish I saw this before buying that one

@adamdix8478 5 ай бұрын

Didn’t work. Followed exact same method for three different devices, all of which show non genuine battery and no battery health information.

@MINERAL-115 6 ай бұрын

Very cool, I've town down a few original XCAP batteries and they were decent quality cells with high quality BMS boards. I'm hoping to see more of the same quality with this, as the tag-ons were a... misfire, at best. Does this version of the XCAP battery have the same patching system as the tag-ons, where it forces 100% battery to the end user GUI only, and firmware still reports the original battery health (so if viewed in 3uTools, for example)? I'm hoping having constant access to the full BMS means that we can have something a bit closer to an actual SWI hijack/passthrough with a live patch.

@bradleymcguire7046 6 ай бұрын

New Health is present in 3U

@MINERAL-115 6 ай бұрын

@@bradleymcguire7046 Wonderful! I'm looking forward to having a play with these! :)

@mystorian 3 ай бұрын

I hope IG has fixed the battery swelling issue. I used xcap for a couple of years and had about 25% come back with swelling.

@Cloneufc Ай бұрын

That's dangerous.

@raunaksharma2461 6 ай бұрын

I recently ordered 10 of these batteries for iphone 11. Followed all these steps correctly . Out of 5 iphone 11 I tried only 2 were sucessfully fixed with no important battery message and battery at 100% rest of the 3 still have the Unknown battery message along with no battery capacity. Please help

@InjuredGadgets 6 ай бұрын

Please call us and ask for Brad or Kameran! They can walk you thru it.

@adamdix8478 5 ай бұрын

I have also had exactly the same issue. Very frustrating! I like the concept, but there seems to be an issue with consistency.

@malcolmmurdoch9527 4 ай бұрын

I also got the unknown battery message

@jackpuri1976 Ай бұрын

@@InjuredGadgets Hi I followed the step-by-step as you showed in the video but it still shows 72% rather than 100%. I bought ur batteries from Replace Base UK. any help will be appreciated.

@johnjohn6853 26 күн бұрын

@@jackpuri1976 hi i have exact same problem did you mange to solve it

@adgrumbling 6 ай бұрын

I noticed that you didn't use a lightning connector to power on the iPhone either time. I just wanted to make sure that's right.

@bradleymcguire7046 6 ай бұрын

Not necessary, just booted with the initial xCAP before BMS Transfer

@michaelv1984 2 күн бұрын

Ok I did this and it took a few tries. I’m finally getting battery health, buts it’s at 74, not 100

@Eruni14 6 ай бұрын

Is it possible to ship to Japan?

@TheRahman2000 6 ай бұрын

Can you show us how to fold for the iphone 11 pro?

@bradleymcguire7046 6 ай бұрын

kzfaq.info/get/bejne/ar6Wobd-0ZaYaGw.htmlsi=rWip3HYCf39cvKuK

@ZDtue Ай бұрын

kzfaq.info/get/bejne/ar6Wobd-0ZaYaGw.html

@maxmallik198081 6 ай бұрын

Im still getting the message

@isaacankrom115 5 ай бұрын

Same

@MaratibAliShad 3 ай бұрын

Will it always show 100%, or will it show the real health of the battery?

@Taylor-lp4vj 6 ай бұрын

How soon until they are available for all iPhones?

@InjuredGadgets 6 ай бұрын

Over the next month we will be releasing all the models.

@glenn-po7wr 5 ай бұрын

Why do they give important battery message after being turned off and then take a few reboots to get rid of the message ? I’ve tried these on iPhone 11 and iPhone 12 Pro . Both the same .??

@bdafonefixguy 4 ай бұрын

i see ALLOT and its hit and miss either method. i think it comes down to the phone itself. or static or heat damage to the bms. i have 1 tricking the jc stand alone charge board -shows zero cycles and 3300mah but in the phone it keeps popping the message . cant be bothered . p.s i hate tim crook

@marcusgoodwin2772 4 ай бұрын

I just did one on a 13 pro..booted up phone and still got battery message..unhooked battery and booted up again and everything was fine.let battery die all the way down to 0% like any other battery replacement..now I'm getting the battery message again

@johnjohn6853 26 күн бұрын

@@marcusgoodwin2772 same here did you manage to resolve it are there any other batteries which work

@richardali6772 6 ай бұрын

I hear that if you do this method, the battery drains faster.. Is that true ?

@InjuredGadgets 6 ай бұрын

Not at all.

@bdafonefixguy 4 ай бұрын

ok. fix for this right now is ios 17.4 and restore with FIX BATTERY HEALTH box checked in 3utools. this way all u have to do is do it and put in and do the restore . no other battery required . COULD not get this or qianli battery tag to work last couple weeks . restore is only way for now. apple might be plugging back doors where they THINK there is security risk. example u cant jailbreak certain mid versions of certain os's

@alexigeek 10 күн бұрын

IOS RESTORE NEEDED AFTER 17.4.1?

@Superiorcellcare 5 ай бұрын

iPhone 11 connect battery did not work for me. Still shows battery message after following steps. Please help

@RyzXcs 5 ай бұрын

Same for me

@malcolmmurdoch9527 4 ай бұрын

Also me

@MrBchi 5 ай бұрын

Just followed the instructions to the letter and I'm still getting non gen message

@richardgreen4723 5 ай бұрын

and me

@MrBchi 5 ай бұрын

@@richardgreen4723 I've found I need to plug it in to turn it on the first time after you prompt non gen message. Works every time so far

@malcolmmurdoch9527 4 ай бұрын

And me

@MrBchi 4 ай бұрын

You need to have the phone plugged in when doing non gen for first time

@malcolmmurdoch9527 4 ай бұрын

Do you mean you have to connect the xcap battery to the phone, power on, then power off, disconnect the battery, then attach the BMS from old battery, then power on the phone again? I did this and I still get the non gen battery mesdage