Get in contact with Dave from Explorer Express if you can, he is closing shop soon and just met a fellow XCharger at a Mustang show this last weekend he had his built with a Magnusun MP112 built motor and 6 speed transmission, etc putting down 423HP at the crank roughly 380 to wheels

Carlos Gonzalez When is Dave planning on closing his shop? Hope to have funds saved up to purchase one before he does!

Kristian Raffinan ive emailed him and he only has a few kits left. Id get one asap if i was you. Or get the moddbox one. $1200 just need to source an m90.

Chris Farley Thanks for the heads up! Yup, I looked into the Moddboxx one as well.

Kristian Raffinan yeah it's not a bad option. But i think i will still fab my own adapter to run a m122 or the m112

TiresAndSmoke I went home to California to install this with my dad but I'm in Bremerton, WA now, I'm in the Navy and will probably be sent to Norfolk, Virginia in 2019

hey thank you for your service. Ive ventured as far as montana. Washington would be a whole new adventure for me. idk if i would be able to make that drive this year with everything i have planned so far but possibly next year i could take a road trip out there. your car definitely has my attention. keep making videos if you can and we'll have to keep in touch.

TiresAndSmoke thank you for the support, yeah it rains alot in Washington, will be uploading some videos from the autocross events I've gone to soon. Definitely will stay in touch when I can.

Ramón Gallegos it's not the actual GT grille www.ebay.com/i/262566451725?chn=ps&ul_ref=http%253A%252F%252Frover.ebay.com%252Frover%252F1%252F711-117182-37290-0%252F2%253Fmpre%253Dhttps%25253A%25252F%25252Fwww.ebay.com%25252Fi%25252F262566451725%25253Fchn%25253Dps%2526itemid%253D262566451725%2526targetid%253D405043608604%2526device%253Dm%2526adtype%253Dpla%2526googleloc%253D9033415%2526poi%253D%2526campaignid%253D962146729%2526adgroupid%253D46733577494%2526rlsatarget%253Dpla-405043608604%2526abcId%253D1129816%2526merchantid%253D101683717%2526gclid%253DCj0KCQiAvrfSBRC2ARIsAFumcm8M71lo48UL1_yjnd-yhKr_TlZbJXvCF3e3X4RIdY1CjNgSg1ctAQcaAmKOEALw_wcB%2526srcrot%253D711-117182-37290-0%2526rvr_id%253D1408839814091 this one

Wow, never knew about that one. Will definitely get one, thanks!!

Ramón Gallegos No problem also bought the pony emblem on eBay and just mounted it to this grille, you will have to secure it in some way shape or form. And the fog lights are actual GT fog lights from American muscle along with the wiring harness by Raxiom and a fog light switch if yours didn't already come equipped with it.

Wow that's great. Did you had any problem while installing the grille?

Ramón Gallegos Nope direct fit for V6

I bought it straight from the owner on explorerexpress when they were still in business. They closed shop a couple months back now. Some websites might have some left in stock if you call them. There's also a kit on ebay but you have to find a blower yourself.

@@carlosgonz96 I have his inter-cooled kit, great guy. But he retired about 2 years ago. The blower is no longer made. Lucky I have a machine shop. :)

Yes it will. If you can find a kit online get it.

@@carlosgonz96 u know where

Sorry the company that made them is no longer in business, some come up used every now and then keep your eyes open, good luck!

It’s good once it’s installed

Just the Ford Performance True Dual Exhaust conversion, I got this kit for $4200 and thank you

Where did you get it that cheap??

lordofsayans I got the blower used so I got $1k off the total

Carl The Tactician first no, this will not work with the 3.7 engine they are completely different sized engines and the 3.7 actually has narrower angle on the heads which makes fitting a roots/tvs style blower on top of it very difficult without modifying or replacing the hood with one that gives enough clearance to fit. Search GT500 blower supercharger on 3.7 Mustang, this is the closest someone has reportedly gotten a 3.7 with a roots style supercharger installed but no word on a release to the public. First off though, do a lot of research and I mean a lot, make sure you really know what you're getting into, don't makena mistake of getting lots of parts without knowing what each one does and the benefits of each. Research is key to making any project work unless you're willing to leave your car undone in a shop or your garage because you are missing a part or something doesn't fit right.

There's other websites that might still have some on stock, give them a call and see if they do. Also there's a kit on ebay but you need to source your own blower. Good luck hope you find one they're great.

Try Moddbox: modd.me Not the Xcharger kit, but it will work. Just prepare for some sticker shock. ;) My 2003 Ranger FX4 is about to get one....most of my parts are here, just need a rebuild before I proceed. Got a Supercharger off Ebay..keep your eyes open. The 95' Superbird had the rectangular inlet...small gain if you can find it.

I have this kit on my 2007, but with a smaller pulley and a water/air inter-cooler. The kit was put together by a small company called "Explorer express" in CA., and he is now retired. The blower is a Magnuson, and not made anymore either.

devilzking1 yes it is safe for a stock motor for towing if that's what you need, if you try to race it hard you might blow a piston haha so be careful.

Carlos Gonzalez haha thanks no racing in this thing I'm using it to haul the race car lol

Ahmad Khalil it was a 3" pulley I'll be able to get a more descriptive part number tomorrow

Ahmad Khalil sorry just realised I didn't post the part number, did you still need it?

@@carlosgonz96 i would need it would you still remember it?

No they chose to use the MP90 Eaton blower for the kits but there have been people who have swapped twin screw blowers into these kits and yes it gets hot but based on how much boost you put in it.

He has the larger pulley that does not turn as fast, and making about 8psi boost. This set up does not need an inter-cooler for pump gas. What reduces the heat the most, is going to a dual exhaust. My stock single exhaust would not let the heat out, and I gained about 35hp by going dual with my faster pulley and inter-cooler.

@@EarthSurferUSA I have the X charger extreme also, what is the exact model number for the kit you purchased to gain the 35 horsepower?

Notice he now has dual exhaust at the end of the vid. The car had a single exhaust stock, and it would lose about 25hp with it, and heat up the engine. with that blower on it. So, with the exhaust fixed for the blower and lower engine heat, it is typical that putting a supercharger on a engine, and still be able to run 93 octane pump gas, (about 10psi boost), will add 60% more power. If you added more boost, you would have to use race gas or alcohol/nitro methane, or some other fuel that can handle ore boost. So pretty much for the street, if you supercharge an engine, you will gain 50-60% more power than the stock engine made. Now you can figure out all of them. :)

Haha appreciate it, but I'm more of a Batman fan.

@@carlosgonz96 I understand. The Super movies aren't really that great. If only they were more like Smallville....

The company ExplorerExpress went out of business a while back ago. I Bought mine over 3 years ago. Just uploaded a video where I remove the supercharger and will be repackaging to sell soon.

@@carlosgonz96 oh sweet nice man! I'd high key be interested in buying it from you as i cant really seem to find any good examples online at all

If you have an email we can talk about price

@@carlosgonz96 I would honestly be interested in purchasing it. My email is "thezakzone@bellsouth.net" Or you can message me on my social media as ill respond much faster there Instagram- "zack_holidank".

@@carlosgonz96 my email is braidenbryant2003@gmail & my social media’s are @braidenbryant_ if no one gets ahold of you on this I’m interested

You're a little late to the party

I have the almost same kit on my 2006, (same v6 engine), but I have the smaller pulley and the inter-cooler. I am making about 310 at the wheels, (with ford racing dual exhaust, big difference), and I estimate you would be making about 275 at the wheels if you got the dual exhaust. Not only do you gain about 25-35 hp with the dual exhaust, but your engine temps go way down also. Nothing raises engine temps more than a lot of burning fuel/oxygen with no place to go. And, if you ever need a rebuilt tyranny, (options are nil for the V6), I found a great guy at "Modern drive line" in Ca. He also put some harder GT gears in mine. Truth be told, I should have blown a V8.

Where did u get the kit from been lookin for one for my 09 4.0 a link would be nice thanks

It was about 280 to the wheels for the non intercooled kit.

Unfortunately the company that made these kits went out of business almost a year ago, only a few new kits remain out on the internet otherwise only used kits online, good luck hope you can find one!

It will be fine with out a compatible tune,----for a little bit. :)

Thank you man, she's been a lot of fun to drive

They were discontinued sadly :^(

There's some on sale on certain websites and some people might be selling on forums but otherwise I haven't seen anyone selling them. There's a kit on ebay but it doesn't come with the blower.

I have a PROCHARGER KIT 2005 V6 MUSTANG. Text me 813 638 7270. I'll send you like to search it. I might change pulley on it but still debating on selling or not

Link*

@@1992TampaBoy do you still have it? And how much are you looking to get out of it?

@@jake-rz9vq yea but not selling no more.....

Don Barnard daily driving and light track/drag strip days it'll last you a good amount of time with regular oil change and maintenance to maintain the engine strong, do not recommended full fledge track day with stock pistons. Unfortunately one of my pistons cracked but it's repairable and currently being worked on, updates and video to come as soon as repairs are made.

@@carlosgonz96 how do you know if you have a cracked piston? What happens?

Ford Performance True Dual Exhaust for the 05-09 V6 Mustang

It's a discontinued MMD style chin spoiler for the 05-09 V6 mustang unfortunately I have not seen it anyone on sale since it got discontinued.

bryan morales I've got a few and some autoX vids I'll upload soon

Sadly the Xcharger supercharger was discontinued, but you can get something extremely similar to this and that's taking the supercharger from the Thunderbird 3.8L. You can fit it onto the 4.0 v6 all you need is the kit and the m90 supercharger

@@toomuchdrip9054 will the supercharger from a Buick Park Avenue 3800 V6 fit the 4.0 with the moddbox kit ?

@@edgarcelio2160 No. It has to be from a Thunderbird

I got it over two years ago when they were about to go out of business.

@@carlosgonz96 I have the kit also. I think I am going to get the cervini dual side exhaust set up for the car's new paint job. I have on it now, Ford racing dual exhaust. I am sure I gained at least 30 rwhp and much cooler engine temps when I took off the single exhaust and added the Ford racing dual exhaust, (also JBA headers). Would you be interested in buying the Ford racing dual exhaust from me? I will give a good deal. The name is Doug, in Michigan, and the number is 616-458-8103.

The Dopamine I do not own or sell the Xcharger kit if you can get in contact with Dave at ExplorerExpress he can help

I am sure he did. There really is not an option for the V-6, but it is a pretty good tranny. I did have one rebuilt with harder GT gears put in at a place called "Modern Drive line", (I think in California). I got a great clutch from them too that nobody else makes/sells. From my experience, that is a sharp company.

the automatics can hold like 1000 hp reliably so im sure he did lol. its the 5r55s

Video coming soon

Video is up

The company went out of business over 3 years ago, the only option now is a used one or the moddbox kit and you source your own blower.