TIP: For anyone with this kit or similar and is still having issues after wiring it like the video here is a fix. Plug the pins into the connector just as it shows in the video. When you plug the connector into the red part on the ballast just flip them around on both of them. Mine actually had a positive and a negative mark on each one to match them up. So you’ll want the positive side to go into negative slot and the negative side to go into the positive side if that makes sense. Many hours of frustration and this is what finally got mine to work correctly.

Thanks for the info,that helped.I appreciate it.

Great vid man, i have the same kit. 2 questions: #1.....for the passenger side oem connector in the harness do you just tape it up to keep the moisture out? #2...... On the hid bulb itself, do you remove the metal cage around it? I just want to maximize light ouput and concentration, my toyota has really reflective material in the housing itself.

Very good videos keep up the good work god bless you man.

mine didnt come with the connector to plug in where the headlight was, what are my options

Anyone knows why my high light sensor it’s on every time I turn my lights on ? since I installed my kit

I ordered a set of high and low beam hid kits my question is how do I know if I will need the extra relay wires or not I plan to install them in the early spring so I have some time what is the purpose of the relay harness

I had the same problem with my h4 kit.. .they had the wire leads all in the wrong place, Hi was in the low spot... glad ground was right or maybe BOOM. mine lasted a loooong time... I did have a ballast die, but $20 to replace.

ent u see d silver around d bulb u takin out that or leaving it as it is???

How to install hid kit in hyundai sonata letest 2015 plz comment

Hi. Are the Xenon kits (of each manufacturer) essentially the same (components, ballasts, etc.)? By that I mean that can you install a particular kit in a car with H4 bulbs, and then later remove the kit from the H4 bulb car and install to another car (that takes H1 bulbs) with putting H1 bulbs? Or do yo have to buy an H1 kit?

Hi eacardoc1, I never heard of the actual bulb moving up and down to switch from low to high beam. All of the Bi Xenon HID retro's I've been looking at, the switching between the low and high function is done with a small solenoid activated deflector/cutoff within the projector itself. the deflector is normally up when using the low beams, and drops down for full light output when going to high beams. Is DDM Tuning still selling the type of kit you installed? Learn something new every day. Are those kits still working for you. And which one do you think is the best from DDM Tuning that you installed. Thanks for posting. All the best.

I,am install to hid kit sonata 2015 letest after come to chek the headlight left and right .becous i,am install to hid sonata 2012 , 13, 14 no problem .?plz comment

4300k is the best brightest colour to have, you loose some luminance at 5000k, but still useable, I hate 6-8 thousand k lights, I threw my 6000k halogen in the garbage because I couldn't see in the rain with them, thanks for the info.

Kensun 55w vs xentec 55w whose better

I installed a 35w hid kit from xentec and it made my foglight housing really hot from just a minute of use.

Are the bi xenon bulbs larger than a single beam bulb?

I installed a H4 conversion kit on my Nissan Np300. But one of my bulbs keeps going off or not responding. Since each bulb has an earth cable must i put both on the car body? Or must i install one on the battery ??

i got the same thing except 35w slim ballast.. they look exactly the same as this.. really good stuff imo

looking at the ballast LOL,,,can it get any bigger??? :) Ballasts are too bulky! Is it AC ballast or DC? I would go with Sportiva or Opt7 kit ,,much cleaner one and more reliable ballast! However ,,,,I know Xentec said their kits have 2 year warranty!

make sure you retrofit those hids in a projector... otherwise you will blind everyone else on the road lol..

Do you mind if you could send me the link to where you bought these?

Great vid. I have similar set. But having issues with the passenger side not working sometimes. There’s no factory plug just ground. Ground is good but intermittently work. Any suggestions on how to fix would be greatly appreciated. Thanks.

so only one factory harness coming out of the vehicle is used? the one on the side with the battery? what did you do with the other one, just tuck it away somewhere?

Bro pls tell me h4 Bi-xenon means dual beam hid pls reply my ans

Dear please confirm if BI XENON means you have hi and low light

My trouble is, I installed them, and they blew my fuses.

I'm looking at getting some HID's for my truck and not sure which brand to get. you think that Xentec is the way to go? Any other products you'd recommend?

Does 6000k can work on 35w or 55w ballast

do I have to disconnect the battery first before proceeding the installation of my HID kit?

Thank you

One of mine is brighter than the other That’s on my end not the bulbs or huh

The problem with having HID installed on the vehicle is, people installed them on a stock headlight lens that are not designed for HiD 's ! So when driving down the road they are fucking annoying to the other drivers..they look like high beams are on all the time ... if your going to install them , do it correctly and get after market hid lens if you don't already have the proper lens on the vehicle!! Other than that it's all good..

ac or dc ballast?

Did they last??

👍

alguien que pueda dustribuirme este produco a mexico

Çok mükemmel.

Hi Nick! Check this out!

😆 they don't move up and down. They move in and out .

XENTEC IS ON OF TBE CHEAPEST MOST UNRELIABLE IT BEING SOLD!!! Would recommend any other kit than XENTEC!!!!!

شغل عدل

Xentec is bad quality

those are garbage junk trash throw those away

Garbage ebay crap, deffinetly wouldn't put that in a more expensive car and risk harness and headlight burn outs

dumbest invention of hid lights ever, better off putting in a normal bulb or getting a hi low led kit, simple plug and play, no messing around like this

i tore up a huge light gun anf this was inside and im like wtf is this for ?