BD another great video. You’re one good pilot and you flew the plane spot on. Keep up the great videos and thanks for being very informative. Danny
@BDTennessee11 ай бұрын
Thanks so much Danny!
@jcb671311 ай бұрын
good looking flight and set-up !!!
@BDTennessee11 ай бұрын
Appreciate the good words JCB!
@SteffenRC11 ай бұрын
Well done BD.. looks like a great plane to bring to the field on those special days to show off.... I'm sure its a real crowd pleaser.... Thanks for sharing.. Will
@BDTennessee11 ай бұрын
Turns head for sure! Thanks for watching and comment Will!
@nirlachman00711 ай бұрын
Great review BD! Love the detailed info in the description ❤
@BDTennessee11 ай бұрын
Appreciate you nirlachman!
@koko-wt1ub11 ай бұрын
Nice flying!
@BDTennessee11 ай бұрын
Thanks Koko!
@paulmullen831611 ай бұрын
Absolutely superb review bud I've been holding off doing the bypass as wanted a smooth transition between wing sweep and elevator ive been racking my brain how to do this my friend a short demo would be welcomed by many I'm sure 👍
@BDTennessee11 ай бұрын
Thanks Paul! Yes ill post video next few days on how to setup.
@paulmullen831611 ай бұрын
@@BDTennessee superb bud I look forward to seeing it 👍
@BDTennessee11 ай бұрын
@@paulmullen8316 stay tuned :)
@helipoor11 ай бұрын
Yes a tutorial would be good thing for wing sweep settings Please..
@jessejrob10 ай бұрын
Yes please!!!
@txkflier11 ай бұрын
Nice job and plane. Unfortunately, I don’t have the cash or room to add one of those to my hangar.
@BDTennessee11 ай бұрын
Appreciate you txfklier! Heard that,its a big jet!
@steelrainfpv338311 ай бұрын
Man that runway looks slick from all that grease! 😁
@BDTennessee11 ай бұрын
Bahahaha, thanks!
@JeffinLowerAlabama11 ай бұрын
Brad fantastic flying and Bone setup for smooth flying. Zoom zoom zoom Jeff in LA USA
@BDTennessee11 ай бұрын
Thanks Jeff in LA!
@tughillrc632711 ай бұрын
Very good review and Thanks for your set up info, My question is for your 10mm up elevator on the wing sweep mix what percentage is on your NX10? I know it may be different for everybody however only by + or-2%. Thanks for this Video BD
@BDTennessee11 ай бұрын
Looking at the monitor,elevator should change by 30 in value. Mine goes from positive 15 to positive 45...
@tughillrc632711 ай бұрын
Thanks BD, Mine will be close to the same. However I use a lighter 5300 SMC pack and have the RC Geek Afterburner kit in it so I had to move the battery most the way forward to get neutral CQ@@BDTennesseeI plan on buying the 6200 SMC packs at a later date when on sale if possible
@BDTennessee11 ай бұрын
5300 works. I have used both. RC Geek afterburnerkit going to look nice!@@tughillrc6327
@davidmcneill38092 ай бұрын
BD, I'm setting up my plane but cannot get the elevator to slowly move with the wing sweep like you did. I'm using a Spektrum NX-8 radio and the same receiver that you have. Any help you could provide would be greatly appreciated. It's almost ready to maiden and could fly with the wings out, which I will likely do the first few flights anyway. But really would like to have it programmed and ready for the sweep as well. I've been in contact with HH, but haven't had much luck yet.
@BDTennessee2 ай бұрын
Check out the iX14 video about Flight modes for wing sweep aircraft. Setup is same with NX.
@DronemanJoeRc4 ай бұрын
Hey BD help me out I would be grateful if you can just tell me on your spektrum trans what do you have on flaps up set at mid flaps and down flaps at I dont want mm I know that I want to know what yours is on the trans set at. also on rates what are your high/mid/low set at on your transmitter all the numbers. back to the flaps what are your elevator settings for flaps up flaps mid flaps down I would like the actual numbers you set in the transmitter. I dont mm like you posted MM. If you can tell me that I would be gratefully thankful thanks again Joe.
@BDTennessee4 ай бұрын
Ill check to see if i still have the file. I posted MM cause its easy top measure and helps with all brands of radio...
@DronemanJoeRc4 ай бұрын
@@BDTennessee yes tell me what you have and have you ever seen your rudder when its full over left or right and elevator full up they smash into each other?
@cliffdavis324710 ай бұрын
Do you have a spektrum setup file for the ix12 you’d be able to share?
@BDTennessee10 ай бұрын
I dont.I could share mine if there is way to upload.
@philipshelton38610 ай бұрын
So mine has arrived and all is setup except CG and Flaps. I'm using the stock gyro setup. It seems that you are using the exact CG recommended in the instructions. Do I have that correct? On the Banana Hobby video, on the stock setup, they mention to not set the flaps to far down, as it will cause interference with the ailerons. They recommend 10mm max measured at the flap rear edge, inboard, down from the wing fairing. Exactly where are you measuring the flap throw? It seems that you are using more than the BH video. I'm asking this, as our field has a landscape fabric runway, 300 ft long and I want to have a short of a takeoff run as possible. I do fly the Freewing AL37 and the B1 Bomber from that same runway. Any help you can offer would be greatly appreciated. Phil
@BDTennessee10 ай бұрын
Book says 48mm and im using 88-90mm. Half Flaps is 10mm / 5mm Up Elevator and Full Flaps is 25mm / 9mm Up Elevator.I didnt have aileron authority issues with flaps. Full setup details with these included is in description. Runway in video is 330 foot. When i touchdown in correct spot at first of runway it will dead stop by 3/4 of the total runway. Extra flap is slowing me down and i have control.
@philipshelton38610 ай бұрын
@@BDTennessee Thanks for getting back to me. Exactly where are you measuring the flap travel?
@BDTennessee10 ай бұрын
@@philipshelton386 i used a deflection gauge.Starts at 0 in center of surface and measure stopping point.
@philipshelton38610 ай бұрын
@@BDTennessee Thanks! Now I'm all set. Just waiting for a weather window. Can't thank you enough for giving back to the B1B community.
@BDTennessee10 ай бұрын
@@philipshelton386 great! Let me know how maiden goes. Trying to give back when i can :)
@JohnDavis-po3fm11 ай бұрын
How do you get the elevator movement slow in your flight mode for wing sweep.
@BDTennessee11 ай бұрын
Assign switch in flight mode for wing sweep.Setup on a separate flight mode. Set switch for flaps to flight mode in flap system screen.
@cliffdavis324710 ай бұрын
but wouldn't that slow down the deploy for all flap/elevator settings? I might be wrong, but I thought that speed setting applied globally to all flap/elevator settings@@BDTennessee
@BDTennessee10 ай бұрын
@@cliffdavis3247 not when setup correctly.Separate movement speed for flaps and elevator when wings sweep.