xTool D1 Pro 40W Laser Engraver Review | What can it do?

xTool D1 Pro 40W Laser Engraver Review | What can it do? | + Air Assist & Enclosure

Рет қаралды 8,669

Күн бұрын

The xTool D1 Pro 40W is the most powerful laser I’ve tested by some margin. It can supposedly cut up to 20mm softwood and 18mm hardwood in one pass and can engrave anything from wood, to stainless steel to slate at speeds of up to 24,000 mm/min.
I’ll show exactly what it's capable of with some real life, hopefully interesting projects. And I’ll run through all its features, capabilities and available accessories including the rotary tool, enclosure and air pump, to help you decide if this is the right laser for you.
If you want to skip forward or back at any time in this video, please use the chapter markers KZfaq creates from the timestamps down below and in the pinned comment.
--------
If you purchase directly from xTool you can save an extra 10% using my code: TechMan and it helps support my KZfaq channel and website - thank you!
xTool UK: uk.xtool.com/?ref=ymRuLqseaV9...
xTool US: www.xtool.com/?ref=ymRuLqseaV...
xTool EU: www.xtool.eu/?ref=ymRuLqseaV9...
xTool France: fr.xtool.com/?ref=ymRuLqseaV9...
xTool Germany: de.xtool.com/?ref=ymRuLqseaV9...
xTool D1 Pro 40W bundle (UK): uk.xtool.com/products/d1-pro-...
xTool D1 Pro 40 bundle (US): www.xtool.com/products/d1-pro...
As an Amazon affiliate, I get a small commission from purchases made via any Amazon links.
Amazon link:
xTool D1 Pro: geni.us/NMBnz
Written article: thetechnologyman.com
--------
You can find most of the recent tech I've reviewed recently all in one place on my Amazon page. I also have a list some of my recommended tech and my current camera equipment for filming:
UK: amazon.co.uk/shop/thetechnolog...
US: amazon.com/shop/thetechnologyman
--------
Music in video from:
Epidemic Sound:
www.epidemicsound.com/referra... (FREE 30 day trial with this link)
--------
Etsy bicycle: www.etsy.com/uk/listing/83058...
Etsy multi-layered sign: www.etsy.com/uk/listing/14814...
--------
Timestamps:
0:00 Intro
0:48 Unbox & Assembly of D1 Pro with 40W upgrade kit
4:41 xTool Air Pump connection
4:58 xTool enclosure, riser feet
5:31 Performance 8 x 5.5W diodes, usable capacity with 40W and 10W module
6:30 Engraving tests on wood and stainless steel. Noise tests
8:26 Cutting tests, 35mm pine, 20mm pine
9:47 Make a push stick for table saw from 10mm pine using smartphone app
10:08 xTool enclosure review. Extraction, upgrade supplied enclosure extraction (3d print), noise level with enclosure
11:38 More cuttings tests, leather, oak, acrylic, black MDF
12:24 Cutting stainless steel
12:41 xTool Air Pump
13:06 Real Projects Model bicycle from plywood, MDF and black acrylic
13:31 Multi-layered name sign
14:14 Oak pizza peel, design Fusion 360, prepare oak
14:52 Prepare template in Lightburn (cut shapes), Cut template
15:02 Alignment crosshair, offset in Lightburn
15:49 Using laser cut template to trim oak to exact dimensions
16:08 Sand, apply finish, use pizza peel in Roccbox pizza oven
16:25 Wireless & Rotary Tool Wireless setup, xTool Creative Space desktop software and smartphone app
17:01 Setup D1 Pro in Creative Space: crosshair, limit switches
17:16 Faulty limit switch
17:27 xTool RA2 Pro Rotary Tool setup and review
18:22 Setup rotary in Creative Space and Lightburn
19:23 Engraving anodised aluminium torch on rotary
20:01 Conclusions
--------
#xtool #laserengraving #lasercuttingmachine

Пікірлер: 21

@woodbeeturnings 10 ай бұрын

Excellent review. Thorough, detailed, and most helpful. Thank you.

@TheTechnologyMan 10 ай бұрын

That’s great glad it helped!

@TheTechnologyMan 11 ай бұрын

I’d love to hear your thoughts on the D1 Pro 40W? Will it make your shortlist? If you have one, is there anything I’ve missed? And do let me know if you have any useful tips!

@SleepHeroic 9 ай бұрын

🤞Nice job you did! See if you can review this one?the Coolook laser Creator 1 is kind of similar to this one I'd love to know more about analyzing new products.

@TheTechnologyMan 9 ай бұрын

Thanks! That’s a great suggestion - hadn’t heard of the Coolook.

@bilirubinbrit1 9 ай бұрын

You could get a JST jumper for the rotary connector, so as not to harm the motherboard.

@maximusgoonus8567 9 ай бұрын

Can you give us a link. I'd love to have an easier way to hook up the rotary

@TheTechnologyMan 9 ай бұрын

I don't switch much to rotary but yes was thinking I'd do the same think I did use it more often.

@chammockutube 10 ай бұрын

If you have your own gantry with a small diode laser and a router for wooden CNC work, how hard do you think it would be to adapt this laser to a non-factory gantry?

@TheTechnologyMan 10 ай бұрын

I have no idea - but doubt it'd be up to any CNC work even with your own gantry.

@user-if7nx9ox3j 9 ай бұрын

So, you are saying after I mount the 40w gantry I can still use my 10W head?

@TheTechnologyMan 9 ай бұрын

Sorry missed this question. Yes you can swap modules on the 40W gantry.

@JJB123NC 10 ай бұрын

Have you done any testing in EVA foam? (utilizing the 40W) I have been thinking about pulling the trigger on a 40W Xtool, but need to be able to cut 10mm-12mm EVA foam.

@TheTechnologyMan 10 ай бұрын

I've not got any EVA foam. I've cut Kaizer foam (EPE IIRC) on my 10W machine which cut like butter. If get hold of some will report back!

@JJB123NC 10 ай бұрын

@@TheTechnologyMan Thanks for the reply. good to know about the EPE foam. what thickness did you cut? (using the 10W)

@TheTechnologyMan 10 ай бұрын

@@JJB123NC It was around 12mm IIRC. I focussed the laser halfway through.

@user-yn8kp3qn5d 10 ай бұрын

What app did you use to scale the push stick?

@TheTechnologyMan 10 ай бұрын

I used tooolkaiser to scan the push stick if that's what you mean.

@livelandings747 10 ай бұрын

Great vid, I'm looking at buying one but only for cutting greyboard card 750 micron, any chance you tried it or will? Willing to put up the cost for the test :)

@TheTechnologyMan 10 ай бұрын

Hi sorry I’ve not tried to cut greyboard but would be very surprised if you couldn’t easily cut it with the 40W module. If I get hold of some I’ll let you know the settings.

@livelandings747 10 ай бұрын

@@TheTechnologyMan Thank you