No video
Yamaha V Max 1200 - Gear Oil and levers change
Рет қаралды 24,655
Күн бұрынLet's change teh Shaft drive oil and repalce teh ent levers. Smples!
Patreon Support: / mackiebass
Buy me a Beer: www.paypal.me/...
Get stickers and stuff at: www.cambridgep...
Tip Jar:
If you feel like this video helped you a little bit, then please feel free to support it by voluntarily putting a tip in my Tip Jar via PayPal to:
cambridgepinstriping@gmail.com
It can be as little as 1pence (or $1 ;) and money from this will contribute entirely towards the channel, so I can continue making better quality videos.
Thank you.
Contact me on: cambridgepinstriping@gmail.com
You can follow me on Facebook:
/ mackie.bass
/ cambridge.pinstriping
There's my website:
cambridgepinstr...
And Instagram account:
/ cambridge_pinstriping_...
And if you haven't already, then please subscribe:
/ mackiebass
/ @mackiebass
Thanks for watching and thanks for your support!
Hello and welcome to Cambridge Pinstriping and Airbrushing and...
Custom built Motorcycles.
Place where custom paint meets motorcycles, helmets, guitars and more...
Having fun with painting and custom builds, mostly motorcycles but you can find here anything else that is or can be turned into a good time!
@angowT 2 ай бұрын
A very helpful video thanks. Mine slid off the stand, breaking the clutch lever and bar end cap last week. The gear shifter was also bent. I managed to straighten the shifter and I'm about to do the lever. The non OEM lever was £GB6 and the cheap looking OEM end cap was £GB18!
@MackieBass Ай бұрын
Glad it helped
@tracklifex5259 6 жыл бұрын
Another job ticked off the list ;) Looking forward to seeing your footage of the trip.
@MackieBass 6 жыл бұрын
Thanks man. I will do my best to film some of the trip. Not all of it obviously, but I will try to make the best of it...even if it is for my own use :)
@MidwestMotoRider 6 жыл бұрын
Nice when things work out. So I tried a couple of times to send you some beer and customs keeps kicking it back. So instead I am going to drink it in your honor this weekend! Cheers!
@MackieBass 6 жыл бұрын
Hey no worries bro. Much appreciated anyway! And yes - bestthing you can do is drink to my health and I'll do the same! Cheers!
@117thWing 4 жыл бұрын
Good to have some walkthrough while attempting to do some work on my max. As I just started riding, I don't have any experience with these things. *thumbs up*
@MackieBass 4 жыл бұрын
Glad it helped!
@MotoMirius 6 жыл бұрын
Bet the shaft drive works a lot harder on the VMax than it does on the Virago brother.
@futmandplayz504 5 жыл бұрын
Than for the always awesome vmax videos.
@OldManTony 6 жыл бұрын
Always good to grease your pivots!
@springy-2112 6 жыл бұрын
Sorted !! Bit of grease on the levers works for me .👍☮❤
@MackieBass 6 жыл бұрын
All good then. Nice and smooth action!
@jamesweber4938 6 жыл бұрын
Hi Mackie. In the manual for my 1300 V Star its states to lubricate the levers with Lithium-soap-based grease, so lubricating the levers is recommended. When you do the coolant change make sure all the hose clamps are tight. Mine were not and it started to leak.
@MackieBass 6 жыл бұрын
Will do James, in fact I am already on it!
@CR5boy 2 жыл бұрын
Loving your videos 👍
@MackieBass 2 жыл бұрын
Glad you like them!
@th3v1k1ngW4rri0r 6 жыл бұрын
nice one dude. I always grease levers. As to shaft drive gear oil.. on the 900divi i have.. I've done 1 change at about 45,000miles. Due for another since I;m just over 70,000miles now. shaft drives tend to just go and dont need weekly/monthly fiddling with. lol October this year I'll have had the divi 900 for 11 years. In the middle of a major change to the bike. Total change of colour green to erm..green.. along with some other mods.. hehehe
@MackieBass 6 жыл бұрын
Good man, a little bit of grease on the levers can't hurt it. That's how it is with shaft drives - they just work. Luckily mine was looked after well, but even so I now know it is as it should be! Bang on!
@shanekneeshaw3483 6 жыл бұрын
I always put a little grease mine great work :)
@MackieBass 6 жыл бұрын
Yes, it makes sense, doesn't it?
@MaximVoytov 5 жыл бұрын
Great job. Before greasing, better to clean well.
@MackieBass 5 жыл бұрын
That's it my brother!
@Cueballproductions1149 6 жыл бұрын
Nice video 👍
@rickmunoz9540 4 ай бұрын
How's it going me brother.. Love you channel, Easy to understand everything you teach.. I was wondering if you know how to take off the gear shifter on the v max? I dropped mine A couple of weeks ago and broke a few things😂
@MackieBass 3 ай бұрын
No longer have the bike, so no, but it cannot be that complicated.
@mikeeger7581 5 жыл бұрын
Over the end of the plunger
@vidmantask.4400 6 жыл бұрын
Simple jobs make great joy! Cheers Mackie from Lithuania, Rock Hard! P.S.: I will enjoy tomorrow too LOL - wanna put dynojet autotune module on my bike :) P.P.S: You defo shall try Lithuanian Beer its one of the best in Europe :) for examply SVYTURIO EXTRA which has golden medal award :)
@rickyevans3845 6 жыл бұрын
love it.
@MackieBass 6 жыл бұрын
Thanks brother.
@GTOlt 4 жыл бұрын
Today I replace my vmax 2000 final drive gear oil. Found not nice thing, only 100ml ~ maybe less and little hedgehog on drain bolt. I have this bike only 3 weeks. 40k mileage only. But no one take career of it :/. But I will try my best!
@MackieBass 4 жыл бұрын
Thanks for sharing
@mikeeger7581 5 жыл бұрын
Boot cover?
@timswartz507 4 жыл бұрын
Great video I have a 92 VMAX and I am now having a hard shift into first and neutral I'm assuming it's the clutch how would I adjust that so it's not such a hard shift?
@MackieBass 4 жыл бұрын
Well, I would start with bleeding the clutch first, as it is easy enough and can be done quick. If it won't check the manual, or seek profesional advise - as I am far from a pro :) Hope that helps.
@mikeeger7581 5 жыл бұрын
Not metal on metal?
@egbertgroot2737 3 жыл бұрын
And the oil of the transmission/gear box? Isn't that a separate oil?
@MackieBass 3 жыл бұрын
Engine oil takes care of that.
@mikeeger7581 5 жыл бұрын
Supposed to be a rubber gasket over the plunger too I think?
@MackieBass 5 жыл бұрын
Hi Mike, which part you reffing to please? Let me know so I can double check it.
@mikeeger7581 5 жыл бұрын
The front brake master cylinder plunger where it gets pushed in by the lever usually there would be a rubber boot over the end to keep dust and dirt out of the plunger moving parts??????? But on different bike models and years MAYBE not maybe they are different but my 79 Honda cm 400 has a boot
@mikeeger7581 5 жыл бұрын
Honestly it’s not that big of deal unless it is to you,, everyone has the right to run their machine the way they want to!!!!
@dinotiso2609 3 жыл бұрын
Come sostituire il galleggiante benzina Vmax Yamaha...
@MackieBass 3 жыл бұрын
I've not done it myself yet.
@dinotiso2609 3 жыл бұрын
@@MackieBass 👍💪
@saharifais7608 3 жыл бұрын
search overhaul
@MackieBass 3 жыл бұрын
ok
@tinks43 6 жыл бұрын
Always best to change even though it Tiffany need it, you don’t know how long it’s been in there. Nothing wrong with a bit of lube! No complaints then 🤣
@andersthomsen7561 6 жыл бұрын
Hi Great video. I appreciate them all a lot. How much torque do you put on those bolts ?
@MackieBass 6 жыл бұрын
I can't remember now, but it's all in the manual.
@andersthomsen7561 6 жыл бұрын
MackieBass rtfm 😂🙏
@juliancampos1953 4 жыл бұрын
Hey Man, do you know where can i get the core of the differential? I've broke some teeth off. Thanks
@MackieBass 4 жыл бұрын
Shit.. my guess is that you need to remove the real wheel and take it from there.
@juliancampos1953 4 жыл бұрын
@@MackieBass yeah i got it appart arleady but it has been a pain in the ass hahaha. Thank you and cool vídeo
@herold30 3 жыл бұрын
The Fly...this fucking Fly...💯👍🏻😁
@MackieBass 3 жыл бұрын
You know it man!
@rogerlacroix20 2 жыл бұрын
Camera is on the wrong side cannot see anything
@MackieBass 2 жыл бұрын
Sorry man, I'ma a one man band and obviously not very skilled camera man/mechanic/editor...
@williboy12345 4 жыл бұрын
Agrega el subtitula en español por favor para ver los vídeos y pon más vídeo que no hay de esa moto mantenimiento cambio de filtros manillas Guayas aceite de motor filtros todo es bueno una idea pero pon el sub en español
@MackieBass 4 жыл бұрын
Me encantaría, pero no hablo español tristemente ... Delgado you tube genera estos subtítulos automáticamente, no tengo control sobre él
@williboy12345 4 жыл бұрын
@@MackieBass thank you very much for responding in the same way I follow you and well I try to see and understand thank you I greet the best good videos your motorcycle the best
Cool Items Official
Рет қаралды 16 МЛН
Дима Масленников
Рет қаралды 9 МЛН
Tank Tankerson
Рет қаралды 476
Jon's Moto Garage
Рет қаралды 158 М.
The Old Mechanic
Рет қаралды 7 М.