Yamaha V Max 1200 -Oil Change and MK1 Filter Malarkey

No video

Yamaha V Max 1200 -Oil Change and MK1 Filter Malarkey

Рет қаралды 25,755

Күн бұрын

Patreon Support: / mackiebass
Buy me a Beer: www.paypal.me/...
Get stickers and stuff at: www.cambridgep...
Tip Jar:
If you feel like this video helped you a little bit, then please feel free to support it by voluntarily putting a tip in my Tip Jar via PayPal to:
cambridgepinstriping@gmail.com
It can be as little as 1pence (or $1 ;) and money from this will contribute entirely towards the channel, so I can continue making better quality videos.
Thank you.
Contact me on: cambridgepinstriping@gmail.com
You can follow me on Facebook:
/ mackie.bass
/ cambridge.pinstriping
There's my website:
cambridgepinstr...
And Instagram account:
/ cambridge_pinstriping_...
And if you haven't already, then please subscribe:
/ mackiebass
/ @mackiebass
Thanks for watching and thanks for your support!
Hello and welcome to Cambridge Pinstriping and Airbrushing and...
Custom built Motorcycles.
Place where custom paint meets motorcycles, helmets, guitars and more...
Having fun with painting and custom builds, mostly motorcycles but you can find here anything else that is or can be turned into a good time!

Пікірлер: 120

@No-timeforimbeciles Жыл бұрын

You can get oil filter adapter plate, for early Vmax, comes with bolt to use spin on oil filter, but you have to get also cross frame brace bar from 97 model up for to fit, makes filter change more easy, I changed on my 88 model

@MackieBass Жыл бұрын

Sounds good.

@jfkenpoman1 6 жыл бұрын

hi Mackie, that spring could be just a guide for an overflow pipe of some description.......keep up the good work jon

@MackieBass 6 жыл бұрын

That's exactly what it is Jon, thanks. I did look it up since...but the pipe is not there - I guess not the end of the world.

@MrJaybunny 6 жыл бұрын

Love the channel dude. Loving the V max and the tunes are right on. Keep up the good work.

@MackieBass 6 жыл бұрын

Thanks bro! I'm loving the vmax to! It's growing on me every day!

@altiger2753 4 жыл бұрын

Thanks for your films. Regards from Poland.

@MackieBass 4 жыл бұрын

Zdrowie stary!

@Moonfleet41 6 жыл бұрын

Hey buddy, the spring coil holds your airbox drain hose from touching the exhaust.. they usually get lost over the years as they fall off the airbox end...

@MackieBass 6 жыл бұрын

It holds a drain hose of some sort but it's not the one of the airbox, as the one from the airbox goes to the carnister on the side of the bike. It's obviously not the most important stuff as the bike runs without it :) - good enough for me.

@timmason7430 6 жыл бұрын

Possibly the engine breather?

@v-max2xs958 4 жыл бұрын

MackieBass not sure if you ever got a definitive answer, but it is a spring guide for the long fuel tank breather hose at the back right hand side of the filler.

@v-max2xs958 4 жыл бұрын

Mine runs on the left hand side because I have the extended range 20ltr fuel tank 💡

@pmgmotorcycles 2 жыл бұрын

Great Video! Thanks for Sharing

@MackieBass 2 жыл бұрын

Our pleasure!

@rockerbillycars 2 жыл бұрын

Great video

@car5car5 3 жыл бұрын

Remove pipe-bolt, replace o-ring(included with filter, install.

@mongrel1799 Жыл бұрын

Yep… just popped the new filter box open and no o-ring for the pipe-bolt. It’s always something

@vegforce4518 2 жыл бұрын

Thanks for your videos, a great help. Later Vmax 1200 have a standard cannister oil filter, mine's a 2006 for example.

@MackieBass 2 жыл бұрын

Glad it makes sense. Yes newer models were easier to work on.

@jamesweber4938 6 жыл бұрын

It is always satisfying working on your own bike and saving money. If you always let someone else do it you never learn. When I was young I never had the money to pay someone to work on my vehicles and now that I can afford it I still do most of my own maintenance, the ones my aging body allow anyway.

@MackieBass 6 жыл бұрын

That is exactly it James. Yes, it saves money but the satisfaction you get from it is truly priceless...and you know it's done properly! (most of the time anyway)

@powerontvify 5 жыл бұрын

The spring is for POGO mode. There is a little switch behind the fuel cap release, next to the left rear shock which, if switched will activate the famous "V-pogo stick" (just make sure you don't operate it inside a tunnel when jumping cars)

@filpip6762 5 ай бұрын

Awesome job :)

@MackieBass 5 ай бұрын

Thank you! Cheers!

@FUELFIREGARAGE 6 жыл бұрын

The spring on the bottom was to hold drain hoses

@WEGGYZZR 6 жыл бұрын

Love that bike ..yet never ridden one..one day hey. Love that instrumental track...used that on a vid or two myself ...Awesome..

@MackieBass 6 жыл бұрын

Hey brother! look forward to seeing you next saturday! I will shoot final update video tomorrow or Saturday to update everyone about it - should be a good one!

@WEGGYZZR 6 жыл бұрын

MackieBass Bring it on ....yes bring it on...lookin forward to it Mackie boy..

@gasolinescream3588 6 жыл бұрын

Mackie great to see the bike coming along. Haha I’ve got a huge set of Allen keys with 1 missing. How it got lost in my tiny garage is one of life’s mysteries and as I’m a bit OCD it drives me fucking crazy. Take car dude👍🍺👍🎸

@MackieBass 6 жыл бұрын

Yes, another step closer, and yes...I've got one missing too. Brilliant!

@aikidokamks 5 жыл бұрын

Haha. I have an Allen key missing as well. Just when I want to adjust the angle of the oil pressure gauge dial on my Vmax

@johnmeade6889 6 жыл бұрын

Practice what you preach regards the springy thing , read the fecking manual, agree with most comments looks like it's for holding an overflow of some sort, good video, gearing up for Cambridge this weekend, then realised its next week, holiday inn wanted £100 for the Saturday night, so will be going home the same day.

@MackieBass 6 жыл бұрын

Hold your horses buddy...can you take a tent? The landlord said he has no problem setting up a camp on the pub's propety. I will update everybody on my next vid!

@asimetriahigienica2163 5 жыл бұрын

Gracias Mackie, el taller está bastante caro y hay que empezar a hacer de mecánico. Larga vida a la VMAX

@adrianvanderzandt4310 6 жыл бұрын

I'm looking forward to what you do with the paint. \m/

@MackieBass 6 жыл бұрын

Me too, if I'm honest :) I know it's gonna be mainly black...but I'll put a twist to it :)

@badjuju6563 6 жыл бұрын

Phillips head screw - does it hold a magnet in the sump plug? The spring thingy probably holds the vent tubes and overflows..

@MackieBass 6 жыл бұрын

Hey man, how's things. The bike is coming up nicely. Can't wait to take her for a spin!

@badjuju6563 6 жыл бұрын

MackieBass That oil filter on Max looks like an oversize cartridge filter on a dirtbike. Is the tank big enough for touring? For some reason I thought vmax had a relatively small tank for the weight and engine size.... I'm sure you will have fun.

@MackieBass 6 жыл бұрын

Hahah, no. 100 miles is the absolute max you can get from a full tank of petrol. But owning a KTM 990 I am kind of used to frequent fuel stops :)

@tinks43 6 жыл бұрын

Always a pain to find stuff the wrong way round! I just had the same with the cotter pin holding the kickstart on the Bonnie 😡 And my late father always said RTFM! 👍🏻

@MackieBass 6 жыл бұрын

Don't you just hate it..luckily I thought that wasn't right...metal spring against rubber o seal - it ain't gonna work!

@GTsGarage 6 жыл бұрын

You cant go wrong if you live by the "if it's not broke, don't fix it" or even better "if it's not broke, don't touch it" lol

@MackieBass 6 жыл бұрын

Amen brother. I did lear the lesson the hard way many many time before. Leave the shit alone - best way :)

@gorgon9786 6 жыл бұрын

The «philips» screw in the drainplug have a magnet in it...easy changeble..easy check.. and prob. when on road, - easy fit with the onboard tool..??

@MackieBass 6 жыл бұрын

Yes, that makes sense!

@PaleHorse68 5 жыл бұрын

The spring hanging is a drain tube guide. The screw in the drain plug (I think) is on overfill drain/secondary drain?

@futmandplayz504 6 жыл бұрын

Awesome! Metal Mechanic!! \m/ (Getting a V Max 1200 myself maybe Sunday!)

@MackieBass 6 жыл бұрын

Heavy metal thunder! Get a V Max, they are great!

@futmandplayz504 6 жыл бұрын

MackieBass Yeah. I must! Greets from Denmark

@tntcyclespdx640 6 жыл бұрын

that spring looks like a guide to route a drain hose down so it doesnt flop all over, just a guess though. Keep up the good vids Brother.

@MackieBass 6 жыл бұрын

That's exactly what it is! Teh hose is not there - but I guess that's not the end of the world :)

@springy-2112 6 жыл бұрын

Yeah the manual !! On the xjr there was no washer at all i had to find a replacement...people dont check and dont realise the washer is stuck to the filter and bin it...then i come along with my haynes book and swear a lot cos bits are missing ...the little spring inside the filter bolt is a pressure relief valve...if you push it in a quarter inch and it springs back the valves ok !! The big sping under neath ? Must say ive never seen that before ...👍😏☮❤ Just looked at a load of parts diagrams for yours and cant see that big hangy downy springy thingy at all?????

@MackieBass 6 жыл бұрын

Whats that springy spring for springy? - see, I can play that game too :) It' meant to hold drain hose of some kind...I guess if it's not there there is nothing to worry about :)

@springy-2112 6 жыл бұрын

MackieBass Ah yes ..route a drain /vent /breather hose through ..makes sense....springy spring thing !!🤘

@seanbirss1816 4 жыл бұрын

On mine the spring holds some sort of drain pipe. from the air-box i think when I traced it...

@timmason7430 6 жыл бұрын

Col video Mackie, music's good too. Thumbs up.

@MackieBass 6 жыл бұрын

Thank you Tim! Much appreciated. Rock on!

@jaguar7607 3 жыл бұрын

Hi Sir. Can you put a video on Transmission oil change on YAMAHA v max.

@MackieBass 3 жыл бұрын

Oil change covers gearbox change. Same oil.

@thebigplayback 6 жыл бұрын

Did an oil change on my Yamaha 535 and had the same sump plug, had me scratching my head.

@MackieBass 6 жыл бұрын

Interesting little thing huh? Better ask Mr Yamaha himself!

@christophershirley1303 6 жыл бұрын

That spring Mackie... Looks like it should hold a hose in place.... An overflow for something maybe?

@jeffuphill8874 3 жыл бұрын

Cheers man great vids

@MackieBass 3 жыл бұрын

Glad you like them!

@KarlTheDingbat 6 жыл бұрын

It's usually the 8 or 10 mm socket/spanner that goes into another dimension for me.

@MackieBass 6 жыл бұрын

You know it Karl, and you are not alone.

@clautamiralves712 4 жыл бұрын

Thank you

@MackieBass 4 жыл бұрын

Hope it helped :)

@tracystockert5658 4 жыл бұрын

Kickstand

@MidwestMotoRider 6 жыл бұрын

So as others stated that spring is just a holder for overflow tubes for the carbs/battery. I do hate when you just loose stuff like that. Also do you have an address I can send some stuff to? Nothing major just something I think you would maybe enjoy. If you do shoot me a PM that would be great ride safe and rock on man!

@MackieBass 6 жыл бұрын

Hey brother. PM sent! Thank you in advance :)

@stevefenner8449 2 ай бұрын

Anyone know the proper oil covet bolt torque needed? Can't seem to find this for 95 vmax 1200. The bolt to take off was stupid tight. Tnx

@MackieBass Ай бұрын

Check the manual. No longer have it.

@petervaughan4591 6 жыл бұрын

Is the Allen key in the bolt somewhere on the bike? I’ve done it loads of times.😂

@MackieBass 6 жыл бұрын

Hahaa, I blody hope not, as I've looked everywhere!

@th3v1k1ngW4rri0r 6 жыл бұрын

same sump plug on my Divi900 and my 1985 FZ750. NO idea why theres a posi screw in them.. And your spring thingy I think is for the overflow pipes to go thru

@MackieBass 6 жыл бұрын

Need to do some proper research on this sump plug...!

@harvestar2823 Жыл бұрын

When I took mine apart I noticed the spring is missing , is it necessary

@MackieBass Жыл бұрын

Manual says: yes.

@leicmick 6 жыл бұрын

The 10mm sockets and spanner gremlins seem to have a laugh at my expense Mackie there always hiding them

@MackieBass 6 жыл бұрын

Fuckig gremilns! Can we get like a gremlin trap...or a powder, like for ants, but for Gremlins!?

@leicmick 6 жыл бұрын

hahahaha that's the million dollar winner there Mackie we need to invent this substance :) :) :) failing that a fucking big hammer will do the trick :) :) that's if you can catch the thieving furry little buggers first

@MackieBass 6 жыл бұрын

FBH is always the way to go!

@rashidkhalil5472 3 жыл бұрын

Sir please I have yamaha vmax 1200 2000 model. Nd my my bike is over heating problem.

@MackieBass 3 жыл бұрын

Change coolant, inspect the cooling system.

@Al37100 6 жыл бұрын

Hi Mackie I'm guessing that spring is a stop for the centre stand

@MackieBass 6 жыл бұрын

Hey man, trust you are well? It's not, I have looked it up since - and it used to hold one of the drian hoses I think. But I'm not sure which one :)

@th3v1k1ngW4rri0r 6 жыл бұрын

oh, and something in my garage tends to eat 13mm sockets..... I'll got to work on the bike, try and find the 13mm and they will all be missing. Same with the 13mm spanners.. its usually the sock monster nicking socks.... but.. I think theres a 13mm fetish monster out there

@MackieBass 6 жыл бұрын

Don't worry mate, we're on the mission to invent a gremlin trap or poison. Just need more beer to think about it...

@prebenrehr 5 жыл бұрын

Hi Mackie - really nice and educational video. But tell me - what is the right engine oil to use? I was told that you need a 20W40 - but you use 10W40? Any comment on that?

@MackieBass 5 жыл бұрын

Well it all depends on your riding conditions I think. If the ambient temperature is higher you can get away with thicker oil , and teh other way around. Hence I always aim to do my oil change after winter, fresh oil is slightly thicker but it gets around your engine faster in warmer temperatures, so it's all very indiviual too. I'd like to think that riding style (agressive or gentle) is also a big factor when chosing your oil. Hope that helps.

@johnrimmer5812 6 жыл бұрын

Re sump plug that looks well mauled Mackie, maybe change for an original one for peace of mind?

@MackieBass 6 жыл бұрын

That's not a bad point John, I will look into that.

@victorgarciaortiz5449 4 жыл бұрын

Does anyone knows if I can use a cartridge filter like the late 90´s model instead of the paper filter ??

@MackieBass 4 жыл бұрын

I'm not sure on that one, sorry.

@victorgarciaortiz5449 4 жыл бұрын

@@MackieBass Hi mate. I researched a bit deeper and got to that yes, it is possible to use the cartridge filter BUT only with an adapter that usually is a aluminum pieces and in addition, you neet to hace a special crossbar (in a V angle) that leaves a bit more space for cartridge. Check them here: www.ebay.com/itm/Oil-Filter-Adaptor-Plate-Cross-Bar-85-95-Yamaha-VMAX/261495448083?epid=1832286414&hash=item3ce257e213:g:0BUAAOxymiVQ~6f6 I like ur videos mate. I´m also an eager fan of motorcycles since little and got myself a Vmax recently. Plus I´m a cheap rat that like lo learn and save money on maintenance. I´m not a mechanic or similar, but this is my hobbie and I like to learn. Thanks for the videos Hey, where are u from? Not USA right? u have a bit or a nordic accent, is it?

@Blazin130 6 жыл бұрын

Mine doesn't have that phillips head on the sump plug. It stands too proud of what would be the normal bolt. Looks like someone's messed on with it at some point - the head of the bolt does look a bit rounded, so maybe it could have been a "just in case"? Can't see from the video - is the head welded straight onto or threaded into the bolt? That said, my vmax also doesn't have that style of filter either - mine is just a twist-on K&N. None of that bulky housing. Anyway, great videos and fantastic bike - consider me subscribed!

@MackieBass 6 жыл бұрын

Thanks Karl, good to have you onboard! Few people mention that same plug before, I think this bolt holed the magnet, but I struggle to think how? Anyway, it's a MK1 V Max, later models were slightly different. Still, liking this bad boy!

@niallberry4519 5 жыл бұрын

HI Mackie: ive jus picked up a Vmax 1985. I like your videos very practical. I was looking at your luggage rack. Where did you get it?

@MackieBass 5 жыл бұрын

Home made buddy ;) cut and we'll, fabricated it myself.

@niallberry4519 5 жыл бұрын

@@MackieBass Very talented looks very good.

@volastod9327 3 жыл бұрын

Hello. Does the transmission take a separate fluid? Thank you

@MackieBass 3 жыл бұрын

No. Engine oil covers both.

@volastod9327 3 жыл бұрын

@@MackieBass Thank you!

@tracklifex5259 6 жыл бұрын

RTFM LMAO Good to get to know your bike;)

@MackieBass 6 жыл бұрын

That's it! Best way - hands on equipement - best way!

@tonycarruthers9556 6 жыл бұрын

Mackie ,did you just stripp the sump nut at 1.20

@johna6968 6 жыл бұрын

Tony Carruthers I thought that too. Maybe if we could hear the ratchet over the music then we could tell which direction was actually loosening the plug

@MackieBass 6 жыл бұрын

haha, looking back at it - yes it does look like it, but no, I just cracked it open, and as you can see it was later undone by hand.