How to Build a Bathroom Vanity

No video

How to Build a Bathroom Vanity | FREE PLANS

Рет қаралды 228,778

Күн бұрын

Step by step, I break it down and show you how to build a modern bathroom vanity. If you have a basic wood shop you can build this.
*PLEASE SUBSCRIBE*
Disclosure: Links contain affiliates.
As an Amazon Associate I earn from qualifying purchases. When you buy through one of my links I will receive a commission. This is at no cost to you.
Thank you for supporting Bear Mountain Builds and allowing us to continue to bring you valuable content.
*Products Used*
Bathroom Remodel Video:
• Small Bathroom Remodel...
*Products Used*
90 degree positional clamps:
amzn.to/3Tm5Ttd
POWERTEC drawer front installation clamps:
amzn.to/3JJKRgW
100'' Straight Edge Saw guide:
amzn.to/3UhCOxz
Gorilla glue:
amzn.to/34ULnJK
Rigid Nail gun:
amzn.to/3sQVpng
Door Hinges:
amzn.to/3wExJpB
20’’ Drawer Slides:
amzn.to/3LiwEYB
Handles:
www.menards.co...
Kreg Pocket Hole Jig(Newer Version):
amzn.to/3OActbD
Wood Filler:
amzn.to/3Lgu1qo
Homeright Finish Max Super Airless Paint Sprayer:
amzn.to/3De00EO
Spray Tent:
amzn.to/3OB7xmI
DEWALT circular saw:
amzn.to/3MCtwsz
DEWALT impact driver & drill:
amzn.to/49SAvbc
DEWALT bit set:
amzn.to/3g7ddHT
Sherwin Williams Showcase Acrylic Interior Satin Paint in Waterloo:
www.lowes.com/...
Valspar Latex Primer:
www.lowes.com/...
Vanity Top:
www.homedepot....
*FREE PLANS!! Please SUBSCRIBE if you use my plans*
www.bearmounta...
*Filming Equipment*
www.bearmounta...
*Thanks*
@JohnBuildsIt for the painting tips!
*Bear Mountain Build things*
Instagram: / bearmountainbuilds
Facebook: / bear-mountai. .
Bear Mountain Builds (Free Plans): www.bearmounta...
Patreon: patreon.com/BearMountainBuilds

Пікірлер: 312

@BearMountainBuilds 5 ай бұрын

I've updated the plans with a couple corrected dimension. You can redownload the plans from my website here. www.bearmountainbuilds.com/product-page/bathroom-vanity-build-plans

@aaronmcleland4772 5 ай бұрын

Perfect timing, I literally just found your video while looking for alternatives to the overpriced MDF junk at the box stores. I downloaded your plans and see that it was designed to be 3" taller than "normal". Is there an easy way to convert this back to standard counter height? I'm assuming I would simply deduct 3" from the following parts: Side Panels Dividers Back, front, sides, front center, and verticals of bottom drawers Side and internal verticals of face frame Verticals for doors Height of the second from bottom horizontal drawer frame Finally, it seems as though the heights for the drawer slides is a bit arbitrary as long as appropriate steps are taken to line them up properly on the drawers, is that right?

@cindyfisher3149 4 ай бұрын

Soooo….Im in the middle of cutting my plywood sheets from your plans and realized there’s one measurement missing! It’s for the hinged door centers. 5 1/8th by ? I feel like I should be able to figure this out, but….. I’m struggling.

@AK-tb7jf 3 ай бұрын

Hi, thank you for the updated plan. I have completed the vanity (not painted yet) it looks awesome. I have one big issue I am not sure how to resolve. I used the door hinges you recommended from the link. however, my doors stick out too far out they are not on the same plane as the rest of the drawers or the fake drawer. I have maxed out all the adjustments. I just can't get the door flush with frame. Any ideas? I zoomed into your build video and they are flush with the frame. Your hinge on the video may be different than the one on the link.... Perhaps the manufacture has changed that model...!!?? Any help or recommendation is much appreciated and welcomed.

@tams1867 4 ай бұрын

I finally just finished this and it came out great. The instructions and details were great. ( and I am a beginner.)

@mikewaters6980 3 ай бұрын

Good one. Did you paint it yourself too?

@nkongwingwi 2 ай бұрын

I have watched a lot of carpenter's video, but of all that l have watched you the best you take your time to explain each and every detail thank you watching from Africa Zambia

@pupitre1984 Жыл бұрын

Wow, very detailed. I’m 39 yrs. old, loved wood shop in Middle school. I’ve finally acquired all the necessary tools to build this vanity. Just need to clean my garage, practice safety procedures and start building. Liked and subscribed. Thank you.

@chocolatte8803 19 күн бұрын

Good luck on your project, and have fun.

@danielrybin2006 Жыл бұрын

I’ve seen quite literally a dozen similar videos to this one but you stand out for a masterful use of spacer blocks throughout the build, well done!!!

@buckeyecase Жыл бұрын

This was by far the best video I found on how to build a vanity. I just finished renovating a small half bath that would never fit a standard sized vanity. I adapted your plans to build a 37”x16” vanity with two doors and two drawers. As an amateur woodworker I found it a lot easier to attach the stretchers and toe kicks to the sides first, and then attach the base. The toe kicks and stretchers allowed me to square everything up perfectly at the start. I also found it easier to mount the drawer slides, then attach the sides of the drawers to the slides, then I could get a pretty exact measurement for the drawer box front/back (found that idea on an Ana White video). I also found it easier to build and dry-fit the face frame in place once I had the vanity in its final place. I had no margin for error on the size of the face frame because I had a wall on both sides. I then built the doors and drawer fronts after the face frame was in place. Thanks for the awesome video!

@thecampbelllife5054 2 жыл бұрын

I've went and got all of the material today! Going to start building in a couple minutes, I have to have it done in a week while working a 40 hour week, so I hope all goes well. Thanks for the video and plans!

@BearMountainBuilds 2 жыл бұрын

Good luck 👍🏼 you got this!

@rarra 7 ай бұрын

How did it go?

@stroys7061 Жыл бұрын

I just remodeled the master bathroom and bought a 60 inch vanity of good but not great quality - $2,000. I will renovate the main bathroom with a 72 inch vanity next year. I planned to build it myself and save money and get very good quality. This video is just what I needed. Thanks

@maussie9462 Жыл бұрын

Really enjoyed this video and the music made it easier to watch. As a female that's never built much at all, i'm giving this a go!

@titomia1 Жыл бұрын

Don't know what is your background in carpentry but this is without doubt the best vanity build and the best video I have seen. Outstanding job

@baustin4817 5 ай бұрын

Appreciate that you offer plans for free on your website and only ask us to subscribe to your channel. Done!!

@patrickarchuleta9594 Жыл бұрын

Your work is second to none may God continue to bless you and your family outstanding work

@miketony2069 7 ай бұрын

So many great techniques for us beginners here, well explained and demo'd. The ban of my wood working is squaring boxes and will look at those box squares immediately. Thank You!

@JAG1762 Жыл бұрын

Boy, did I need this! I took out my vanity with the intent to replace the side panel due to water damage. I had so much trouble replacing it so I said to my husband that we need to build one. After watching crazy amount of videos, this is the one that matched my brain! However my vanity will be only 36” wide so I got a little discombobulated with the drawer build. I think if I take it slow with the video and the FREE plans, I’ll be okay. 🥴. Thank you for helping us!

@indestruct1bl3 Жыл бұрын

I'm sure you've build one already, but doing just a double door front on your first vanity project is a much simpler project, I did this with a small 30" vanity I made for a friend.

@philipramsden4975 Жыл бұрын

Great video. When not painting a cabinet, I like using biscuits to secure the face frame to the carcass

@BruiserQuad 7 ай бұрын

Great video, great plans, I’m going to keep this idea in my back pocket for now. 2024 prices including hinges, handles, paint and top is just under $700. Not too shabby.

@JohnnyUmphress 2 жыл бұрын

A lot of people, myself included, love that old blue bath set. My granddaughter just bought the complete blue toilet, tub, and sink from someone who is restoring a bathroom. She is creating a retro bath and so far it looks amazing.

@BearMountainBuilds 2 жыл бұрын

That's awesome! Those retro styles are not easy to pull off, so that's sweet that it's turning out great!

@Millasoaps Жыл бұрын

Very high end vanity! I would love to have that in my bathroom. I love the blue too. I’m painting my vanities because they were built very well and would never replace them with the cheap vanities out there. I’m going with various shades of blue also.

@gloriacuevas7530 5 ай бұрын

Thank you so much for the free plans, you make very easy to understand!

@TomKelley-ze4cj 5 ай бұрын

Thank you so much for the great video and plans. They were a great help in building this. I just completed it and it came out great.

@corail53 Жыл бұрын

This was the era of pocket holes for everything on youtube. Great build just amusing that everyone who got sponsored by pocket hole jig companies went a bit crazy with them.

@BearMountainBuilds Жыл бұрын

I’m not sponsored I just like pocket holes

@MrHf4l 2 жыл бұрын

How many 90 degree clamps would you recommend a guy own if he was going to build a fair amount of cabinets for his house?

@BearMountainBuilds 2 жыл бұрын

I live my life by “the more clamps you own the easier life is”, but I have 2 sets of 90 degree clamps so a total of 4. I’d say that’s all a guy really needs but another set never hurts

@bcblair2 Жыл бұрын

N+1 is the answer lol.

@oachcuarezma Жыл бұрын

Hi ...this is the best video about making a cabinet. so professional, step by step, clean and exellent , exellent job. congratulations. i've just suscribe .

@pamellabrown-graham615 2 жыл бұрын

Wow, nice, I'm not a carpenter. Just seeing how it made, I thinking of purchasing one from the store for my kid's bathroom but the quality waste good want it to last as long as it can. Keep up the great job.

@gofastchris Жыл бұрын

Great video and plans. Question the plans say 3- 1x2x8 poplar, is this supposed to be enough for the face frame and drawer fronts? Only seams to be enough for the face frame. Thx

@erenfe Жыл бұрын

Great video, and exactly the style vanity we were looking for! Just need to omit the left bank of drawers and I'm perfect.

@Shananana99 Жыл бұрын

Wow that looks great the color you picked and everything. Beautiful

@danyo41 11 ай бұрын

As everyone has mentioned, this is probably the best DIY cabinet build I've watched yet. Most go into too much detail or over complicate it. Love this video! Only thing I wouldve loved to have seen was your vanity top installation as I planned to use the exact same setup! Either way awesome work 10/10

@BearMountainBuilds 11 ай бұрын

You can watch it on my bathroom renovation video!

@danyo41 11 ай бұрын

@BearMountainBuilds oh perfect ! Checking it out now. You just gained a subscriber 🫡

@juliocesardelgado5521 Жыл бұрын

Dude, thank you so much for making this tutorial with a build plan for free. I've subscribed and liked this video. May you be blessed.

@ignasibarrajonmoreno2980 Жыл бұрын

Thank you very much for your generosity in sharing your work and plans. Soon I will have to build this piece of furniture. Kind regards from Tarragona- Spain

@bugsysiegals Жыл бұрын

In case you didn't notice and to avoid any future issues I seen you stop mid-cut and the saw pulled away from your straight edge @ 1:27 ... keep up the great work! BTW, I have these little WoodPeckers squares but am not sure mine have those little holes in them and I certainly don't have those clamps. I use Festool Domino DF500 which helps hold things aligned when gluing/clamping and went this way after seeing how out of alignment pocket screws pulled panels ... it looks like your method really holds it in position quite well! :)

@AK-tb7jf 6 ай бұрын

Great video, straight to the point. I downloaded the PDF, and it looks great. Q1) How do you fit all the required panels for 3/4 Inch into one 4x8' sheet? I am assuming a 1/8" kerf width. 5 cuts result in a loss of 0.0625"; I keep coming up short for all possible arrangments. My most optimal arrangement is (4+4+5.25+20.5+34+28=95.75) + 0.625 loss = 96.375 Obviously, I can compensate for the shortage of 0.375. However, I am wondering if I am missing something!? I appreciate your response.

@Kensey0521 6 ай бұрын

Ignore the plans. All the dimensions given are wrong. I built it and had to redo all the drawers and the doors

@BearMountainBuilds 5 ай бұрын

I updated the plans yesterday with some modified dimensions. You can download the latest version on my website

@AK-tb7jf 3 ай бұрын

@@BearMountainBuildsHi, thank you for the updated plan. I have completed the vanity (not painted yet) it looks awesome. I have one big issue I am not sure how to resolve. I used the door hinges you recommended from the link. however, my doors stick out too far out they are not on the same plane as the rest of the drawers or the fake drawer. I have maxed out all the adjustments. I just can't get the door flush with frame. Any ideas? I zoomed into your build video and they are flush with the frame. Your hinge on the video may be different than the one on the link.... Perhaps the manufacture has changed that model...!!?? Any help or recommendation is much appreciated and welcomed.

@innpressTV 4 ай бұрын

When it is finally finished, you should make a video showing the door opening and the inside.

@BearMountainBuilds 4 ай бұрын

You can check out the final bathroom renovation video on my channel

@arnoldv5123 Жыл бұрын

Sorry for the Spanish…. Pero esta es la mejor explicación que pude encontrar para elaborar un Vanity. Muchas felicidades por tu proyecto y muchas Gracias por compartirlo 👍🏻 👏🏻👏🏻👏🏻

@BearMountainBuilds Жыл бұрын

De nada!… I don’t know much Spanish but I have google translate so thanks for the compliment!

@keithhimstedt6870 Жыл бұрын

Great Job you make it look so easy.

@helladankseedco.2411 Жыл бұрын

I think I will make one a bit smaller and swap out the Ply and Poplar for Bamboo...Great design.

@anaordonez4890 2 жыл бұрын

Waooo amazing work!!! I really appreciate you time. I try to building this... Thanks for the plans🙏

@MrHf4l 2 жыл бұрын

You can make your own wood filler with saw dust and glue. Works well. Keep up the good work!

@tombrennan6583 Жыл бұрын

This is the best cabinet making video I have seen! While dovetails have their place, I love the simplified drawer technique. I would suggest less music as it gets monotonous, but that is just a personal thing with me. Keep up the great work!

@EricBeck 11 ай бұрын

Really, really good presentation. Much thanks for the excellence!

@robertwoods8762 2 жыл бұрын

This is a unique construction method, building the toe kick onto the base and then attaching the sides. That should make being square much easier to achieve.

@TKr9491 Жыл бұрын

True talent! I would most definitely hire you to transform mine

@Beu8791 Жыл бұрын

Mate, briliant vid! Keep it up. From Australia 🦘🦘🌏🌏

@brycediussam 2 ай бұрын

Not sure if Carcus will catch on but nice build for sure. and the pocket holes were by the Kreg of a different company? I like the extended version you have.

@pas0003 Жыл бұрын

This was great to watch! You're an inspiration, man!

@shad6519 Жыл бұрын

I want to see the different types of bathroom sinks. Thanks 🙏

@ZayTones 2 жыл бұрын

You are so talented! Please never stop doing what you're doing!!

@shazz501 Жыл бұрын

Thank you so much for this video and the plans,I'm thinking of making one and adding a top and a back,going to put it under the mitre station (of course made using your plans) as storage :)

@woodworksbygrampies1284 Жыл бұрын

Hola! 🖐Really, really nice build. You make it look like you have built hundreds of these. I'm still building the momentum to get going on converting my garage into my workshop and I can't wait to build cabinets for it. This video will be a reference for me definitely. Take care and have a good one, Adios!👊

@rgseven6557 11 ай бұрын

That is some awesome level of skill you got there bro. I really enjoyed watching the process. Thanks for sharing this video! You just earned a new sub.

@cindyfisher3149 6 ай бұрын

Thank you for making this video! You have a great pace. I’m getting ready to build a vanity and this helped. I also downloaded your plans. Quick question: the hinges you used for the doors aren’t on your materials list. Can you tell me which ones you used? Specifically I’m looking for the overlay measurement. Thanks!

@BearMountainBuilds 6 ай бұрын

Thanks for the super thanks and I’m glad you enjoyed the video! Here is the link tot he hinges I used amzn.to/3wExJpB

@williamtaylor6252 2 жыл бұрын

This was a dope project. Integrated work bench build was cool too. Excited to see more.

@BearMountainBuilds 2 жыл бұрын

Glad you liked them!

@ashleybethvital-herne1627 2 жыл бұрын

Would love to see a kitchen island build!!!

@abad_gtr1123 2 жыл бұрын

one of the best cabinet/vanity build videos i've seen on YT....and i've watched a ton. great pace and clear instruction...also like how you pause after a set of steps to go over what you've just completed. keep up the great work!

@BH-qi9cq 8 ай бұрын

New sub, here. Your video production and quality is top notch! Thanks for the great content.

@JeffSmithbbq Жыл бұрын

The plans and video are great. Thank you so much and I also subscribed. I am to the point of making the face frame. There are no measurements to show where to set the horizontal pieces. The top spacing looks to be about 4 or 5 inches, but I have no idea of the specific distances between the horizontal pieces. Can you provide those distances, please? Thank you so much.

@BearMountainBuilds Жыл бұрын

You’re right those dimensions are missing, good catch. The top opening dimension is 5” the middle is 7.75” and the bottom is 10.75”. I’ll get the plans updated. Thanks!

@ryanbengston Ай бұрын

Drink everytime he says "carcass" 🤣

@kitkatz9984 Жыл бұрын

Wow...nice vanity😀

@JohnSmith-hr2pb Жыл бұрын

Bro this was awesome

@engineertoartist2813 5 ай бұрын

Subscribed and will use your plans, great video!

@racheljarreau8757 2 жыл бұрын

OMG! This has helped so much! I feel like I can do it too. You're the best! Please keep going. You're a great teacher and videographer. :)

@BobRoberts-yd3wm Жыл бұрын

Great video. Out of all my subscription, I have to say this has been the best earned subscription due to the quality of your explanation and mastery of this craft. Great video sir. You have earned a sub from me. Thank you for such a great video.

@LexiBee11441 Жыл бұрын

Absolutely love the video! One question. If the depth of the vanity is to be 20.5", don't the bulkheads need to be 19.75" with the face frame accounting for the remaining .75"?

@TheSnugrad Жыл бұрын

Am I missing the section of the plans where you give the measurements for the face frame/drawer spacing? Awesome video and I’m excited to get started.

@imsowright90 Жыл бұрын

Nice build.

@michelchristin563 8 ай бұрын

tu est un bon professeur

@NELSONG12 Жыл бұрын

You're awesome! Looks great.

@cannonwoodworking5917 Жыл бұрын

Beautiful color. Nice work. I would love to build more of my own cabinets. I'm hoping to do a closet makeover and post it online.

@ricknolan1215 Жыл бұрын

Looks great good video thanks for sharing

@UriValdez 2 жыл бұрын

Nice build, im going to get this plans as soon as you have them

@BearMountainBuilds 2 жыл бұрын

This is a bit more complex build so the plans are taking longer. Hopefully they should be done soon

@lostladydesign 4 ай бұрын

now if I was shortening the carcasss by 6 inches what adjustments would I make to the drawers so this fits a 43 inch top?

@lakeman59 7 ай бұрын

Based on your drawing you show the stiles at 21 3/4 of an inch and the rails at 5 1/8 my calculations are the stiles at 19 7/8 and rails at 4 7/8 for the doors with a 1/16th of a gap all the way around please review and correct me if i may have miscalculated.

@jas6110 10 ай бұрын

Wow, this was a great video. I have never done any woodwork but your instructions are so great that I actually feel very confident to take on a project like this one. Do you know what was your total cost built including counter top?

@BearMountainBuilds 10 ай бұрын

Including the top it was around $400 I think you’d buy a similar one at a store for about $1500

@austinfain5810 6 ай бұрын

Subscribed! I was curious, in your plans for this build you mentioned using lots of 1 1/2” length pocket screws. The plywood you use is 3/4” thick and less. Would 1 1/4” length pocket screws be even better? Apologies, I am 100% new to this and am trying to learn as much as I can through your videos. Checking online it mentions 3/4” plywood would be best matched with 1 1/4” length pocket screws so was curious why you included the 1 1/2” length pocket screws in your build. If anyone knows please share! TY for making such an easy to follow video and the blueprints so accessible, it’s really motivated me!

@BearMountainBuilds 6 ай бұрын

Yeah it's 1-1/4'' pocket screws to be used with 3/4 thick material

@CG-ux6rj Жыл бұрын

Thanks for the free plans! I’ve been following them and have a question. Do you happen to remember the measurement for the spacers you used to locate the divider panels?

@seth12brown Жыл бұрын

Did you ever get an answer to this? I cant find that either.

@BearMountainBuilds Жыл бұрын

I think that measurement got left off the original plans. I’ve updated them now. I believe it was 13.5” but would probably be worth the check

@suzanbleakly3905 2 жыл бұрын

Wow! Really turned out great!

@lukelloyd7934 5 ай бұрын

Lets keep going

@roguechyk 2 жыл бұрын

Awesome video!!! Perfect timing too because this is exactly the style of vanity we were planning to build! When will those build plans be coming out ???!??? 😁👍👍

@BearMountainBuilds 2 жыл бұрын

Plans are uploaded now!

@BearMountainBuilds 2 жыл бұрын

Plans are uploaded!

@harpoon_bakery162 11 ай бұрын

it would look really good if you put a handle on the fake drawer to make the vanity whole. Yea, you might pull on it for the first few weeks but it goes away. That way it "takes away" the look that it has a fake drawer.

@tomford6136 10 ай бұрын

Or make it one of those tilting drawers to store small stuff.

@dabneyoffermein595 10 ай бұрын

@@tomford6136 Great Idea!!!

@johnrock5715 8 ай бұрын

I disagree. I can't stand the fake handle thing. If anything maybe I would have styled that face a little differently like adding a solid panel in the middle to set it apart. There's nothing I dislike more with cabinets than "fake" drawers. It's silly, annoying, and doesn't add anything to the look of the cabinet.

@RonDaniels-zp6mi Жыл бұрын

Great tutorial! I have built the carcass and most of the face frame, but I don’t see on the plans or in the video what the measurements are for the spacing between the drawer horizontal pieces of the face frame. Can you post those measurements?

@BearMountainBuilds Жыл бұрын

I updated the plans and they should have the dimensions

@GoGo2Go2B Жыл бұрын

My god you are amazing!

@steveh1460 Жыл бұрын

Nice Work! 👍

@dillon24250 2 жыл бұрын

Excellent job! Looks great!

@estanford826 Жыл бұрын

looks great

@richardmiller191 Жыл бұрын

Thanks for posting that is exactly how I want to build my vanity. Best woodworking video I've ever seen! I liked and subscribed. One question - did you only use one coat of paint? Thanks!

@BearMountainBuilds Жыл бұрын

Yeah I only did one coat of paint

@aaronmcleland4772 2 ай бұрын

Hey Jack. I'm building this vanity next weekend. I'm curious about two things. One, what was the reason for making the drawer back 1/2" shorter? Couldn't you groove it the same was as the other three sides, and insert the bottom before screwing the back on? So it's all locked in, no glue required. Two, what do you think about pre-drilling pocket holes along the front edge of the sides and dividers, so the face frame can be screwed on from behind with pocket screws instead of having to fill a bunch of brad nail holes?

@BearMountainBuilds 2 ай бұрын

Good questions! 1. Making the back of the drawer 1/2" shorter allows for you to change out the drawer bottoms in the future if they get damaged over time instead of having to replace the entire door. 2. Using pocket screws to hold the face frame on would definitely work as long as you don't care if you see the pocket holes when you open the drawers.

@guavaman321 Жыл бұрын

What is the correct opening height for the top and bottom drawers, it is not listed in your plans

@mikeyb2d255 2 жыл бұрын

That looks great. You did a awesome job. How about some bunk beds?

@BearMountainBuilds 2 жыл бұрын

Thanks I appreciate it! That's a great idea too, I'll add it to my list of projects.

@szantak 2 жыл бұрын

Nice one! Cheers from Hungary! :)

@6creed933 Жыл бұрын

Liked and subscribed! Gona build this thanks

@taylor-1147 2 жыл бұрын

Awesome video! Love the content here!

@georgeousk707 9 ай бұрын

How could I adapt this fantastic design to put in an undermount sink and what's the max width size of sink I could put in

@BearMountainBuilds 9 ай бұрын

Comes down to the dimensions of your under mount sink. You just need to make sure the dividers don't interfere with the sink bowl. You may need to shift the position of the dividers slightly to fit an undermount sink. This would impact the width of the drawers and front doors

@georgeousk707 9 ай бұрын

@@BearMountainBuilds Yes that makes so much sense looking at your great downloadable plans I can now see how I would need to adjust the dividers and drawers. Look forward to having a go

@dannelsen9161 Жыл бұрын

Thanks for the plans. You mentioned in the video that you created spacers for the top and bottom drawers when assembling the front frame. Do you remember what those spacer measurements were?

@BearMountainBuilds Жыл бұрын

1/4’’ gap between each door front

@markratz2216 Жыл бұрын

Great Job

@user-oz5so1le8t Жыл бұрын

Nice build! But why you make a face frame? It narrows drawer space and takes extra depth. And what about moisture protection from the bottom and from the inside?

@BearMountainBuilds Жыл бұрын

I like the look of a face frame, but the next vanity I build will probably be faceless for those exact reasons. As for waterproofing the bottom, if there is that much water getting underneath this thing to make it rot I have bigger problems to worry about

@ianrenton Жыл бұрын

Thanks for the video and plans. Without these I would not have decided to build a non-standard 55" wall-to-wall vanity. Obviously I need to modify your plan dimensions to suit my 55" wide x 31" high vanity. I think I have got the horizontal dimensions fixed by adding 3" to all drawer widths but when I decided to make both top and middle drawers alike to reduce the vertical height by 3" I found problems with the plans. Adding all drawer front heights and allowing a 1/4" gap above and between drawer fronts and 5 1/4 for toekick, I show over 1 1/2" greater than the 31" height needed. Using the plan dimensions without changing anything shows the same thing. Is it possible that the bottom drawer front height is wrong?

@shawnmiller5049 10 ай бұрын

Good background song in this video. Do you know the name?

@richardmiller191 Жыл бұрын

I just noticed that you have the grain going front to back on the bottom and sides as opposed to horizontal on the bottom and vertical on the sides. Does that matter? Maybe is that for using less on the plywood sheet? Thanks, just wondering.

@BearMountainBuilds Жыл бұрын

It allowed me to use less plywood. Once you paint the vanity the grain disappears

@cyannal7577 Жыл бұрын

I love this! Can you show something similar but smaller? I want to do this in my bathroom but the biggest I can go is 40".

@laceylanter9397 Жыл бұрын

If you download the plans he mentions you can see all the parts broken down and scale down the measurements for your needs. I’m doing that now and it’s helping me with my first cabinetry gig!

@iamryancarlson 11 ай бұрын

Are you really asking him to redo this project to your specs? Holy moly.

@Bangbangbigelow Жыл бұрын

Excellent work and very inspiring! Curious, would the paint need to be mold & mildew resistant given that it's going to be in a steamy shower bathroom?

@BearMountainBuilds Жыл бұрын

Most acrylic pairs will be resistant