I picked up that Raw-Toast shirt and its awesome! Shipped so quick and get a lot of good laughs!

Make a shield out of it. See how bullet and arrow resistant it is.

Tyler is one of the few people I know who is both smart and dumb simultaneously 😂

love your content!! Side Note: You have a Gadco garage door, they no longer manufacture and your top section is coming apart... get yourself a strut and self taper it to the very top to save it so you dont have to buy a new door :) Just a suggestion from a fellow garage door tech :D

Make a pipe with it, capped on one end with a valve on the other and see how much psi it can hold

Pov. your looking at the bag of plastic beads slowly move towards the end of the table as he hits the ball with the hammer

So back when I worked in a haunted house we used these things to put in our vampire fangs. Basically the thermoplast was crammed into the fang and then we held it against our teeth to make a perfect fitting denture. Also these are the same types of plastic used to make football helmets.

I played around with this stuff ages back. Yes, it makes fantastic repairs or custom/ad-hoc grips for tools. There is absolutely nothing more ergonomic. It's even quite easy to impregnate cloth/mesh with it which is probably my plan for upgrading the camping kit. A mesh reinforced stable plastic roll? Could repair anything or even be used as a cast/splint if you had enough of it. The only problem is you can't leave anything you make with it in the car in the summer. I had a knife handle melt and irreversibly integrate itself into the fabric of the rear seat.

i think leaving a little cube or other shapes of this stuff in various liquids like your other "leaving [thing] in [liquid] for 30 days" videos could be interesting to see what can eat away at this stuff or weaken its structure or just generally seeing the changes

can these make my dad come home

DO MORE WITH INSTA MORPH: 1. Target and shoot with crossbow. 2. Insta morph sword 3. What happens when its frozen 4. See if insta morph hardens with different liquids

this stuff has been around for YEARS (Decades)... as an ART SUPPLY. it was called Fantastic Plastic (back in the day). We used it as kids to make pins & chains (using paperclips as links).. and mold small figurines.

I love how you bought a whole new pulley system but won't upgrade that table. Lol

Who else was watching that bag, just waiting for it to fall off the table?!! 🤣

I used these to mold a toe insert for my ski boots to reduce some volume in the toe box. Worked like a charm

I'd like to see a knife or hatchet blade made from this stuff an see how effective it'd be.. thinking more for a survial pack to make a tool you forgot or lost

I think you should make it into an armor plate and see how easy it is to cut through it with a sword, or with some arrows. Would be a fun way to test it's density/durability.

In our shop I have a little hammer with an aluminum handle, one side of the head is brass and the other is plastic kind of similar to the type you're using. It's super useful for anything I need to lightly tap. Very useful to me in making fine adjustments to my machines.

Been using these for years in different brands. Most useful thing to have if you are stuck lol. Absolutly love them

Like 15 years ago when I did special F/X makeup this kind of stuff was slowly making its way into private markets. It makes good teeth, fingernails, and horns for all you cosplayers.

So far it looks like this should be a useful addition to anyone's camping bag. Another thought was it seems well suited for making an improved splint or cast if you couldn't get to medical services while camping within a couple of days..... Overall looks like a very ingenious product that could find uses in anyone's garage/workshop.

Great video& demonstration. Thanks!

The serial killer vibe in that garage is intense, from the headless and tattered human torso to the chain and pulley system and all the writing on the walls :o

This would be an excellent piece of gear to put in a survival pack. It's light, does not take up much room. Can be reused, so depending on the situation you can continue to make tools you need for survival and it's very very easy to use.

Tyler should make an electric hammer with that

I swear Tyler your such a genius with this content. Idk I’ve never come across any channels like yours. You’re dry sense of humor kills me in every video lol

I could see this being super useful in a hiking/camping/survival bag. Generally infinite tool in a very convenient bag

I've been using them in my small repair business for years. They're very handy. They're made of the same thermoplastic that many commercial products are made from so are just as strong.

Everyone we need to get Tyler a proper workbench

Thanks!

Like to say the timer on the first batch was flawlessly timed to my timer when I was cooking a late night dinner.

I love hearing the train go by. When I was a child we lived in the country close to train tracks. The sound brought back great memories!

You should’ve compared the Love Hammer with the plastic one.

Id like to see if you could make a lawn mower blade ,can it be sharpened to cut grass and take the forces of being run at high rpms.

That stuff is super cool. Especially since you can reuse it. That awesome

Great video! You ought to read what the winch says right before the stretch you might get a higher number. I think it's really up in the 550-600lbs range. Keep up the good work!!!👍

Try forming it over some Bolts/nuts and see what kind of TQ numbers you can get out of them as socket wrenches and such.

Do a type of jar video! Put 5 foods inside the molded plastic! See how well the food keeps, and how easy it is to get to the food in an emergency situation.

I take Thermo plastic camping. I have used it to patch a boat. I have made tent stakes and rings to attach ropes. Fixed a gun butt. And made cups and a bowl. Used for cereal.

I like to heat the metal part directly and stick it in the dry beads. It sticks to the metal a lot better and it doesn't rust so much. When you use water it traps water against the metal and it rusts pretty quick. I also found out that this type of plastic degrades in 2 years time and gets brittle as well as much stickier when melted.

I couldn’t help but notice that a lot of the bead items looked adult themed

Try making a tow chain with it see if it's strong enough to pull a vehical

I used to work for a company that makes this stuff for industrial use it is actualy awesome stuff and is indestructible

Handy stuff for quick repairs.

You should try to make it into a knife and see how sharp you can make it.

i work in a plastics factory, that just looks like the material we use to make the stuff. the clear kind is used for things like those brita jars, or the thing that covers the car lights. you can really make anything out of it, you just need to heat it up so it'll melt and then mold it. obviously in a factory it's melted at over 200ºc, so it becomes liquid, which is easier for machines to inject into the mold. however, if you use boiled water, that's around 100ºc, it'll make the plastic soft enough to work like a putty, and if you're quick, you'll be able to mold it by hand before it cools down into shape. and if you make a mistake, you can just put it on another pot of boiling water and start again. so yeah i guess one could use it as a fake tooth, you'd just need something shape the plastic to the right size and shape and then find a way to keep it in place

these suggestions are fantastic

Could you try making a shovel or axe handle out of it? Both are usually under a lot of stress

The man gives no effs about his fingers hammering like that. Had me on the edge of my seat lol.

Make a lawn mower blade with it!! Sharpen it and install it on a lawnmower from an old video maybe!?

I think a few bags of that for your SHTF kit. Would come in handy for preppers

Seeing these made into a wrench or ratchet set would be a cool idea

what I'd like to see is this stuff but turned into a knife then sharpened

Yes please do more videos with this stuff its amazing how many possibilities there are!!!!!!

Wow this stuff is legitimately amazing

Professional "wood sawer" that cracked me up. We love Tyler, he adds to our vocabulary. Carpenter Tyler. Keep it up, I enjoy your videos.

we definitely need more videos with this stuff. Amazing

The fully plastic "hammer", although way better than I expected, wouldn't replace a metal hammer but it looks like it would be a fantastic *mallet.*

i've made a couple of roll cages out of this for fpv rc cars, easy to repair with hot air gun. also can put it in cold water to harden quicker

Without a doubt it's single most unappreciated and slept on product ever... They are super duper f****** awesome they are very strong get you a torch for touch ups

Tayler reminds me of my childhood fav show when we had to wait for a whole week to watch the new episode.

I used them (not same name) 14 years ago to make a holder that was screwed up to wall for xbox 360 controller... absolutely mint

Leave things in flex seal in jars for 50 days. We need more of those videos

Try using it like an epoxy stick to repair things, like patching a damaged PVC/pex pipe and seeing how it holds up.

Trying using it as a glue and separating it with the wooden blocks and the crane scale.

I’m no pro but I’d assume the issues you were having with the saw and hammer were because the table wasn’t sturdy. It was bouncing on the nail test and wobbling on the saw test

I've made knife handles for my blades, works pretty well. Overall it's a tool I'd use for daily use for repairs and just messing around.

I use this stuff when when making teeth for my bands masks, in all honesty is you get the beads to a shape you like and put it in the freezer they harden quick

welcome to tyler playing with balls

Ooooo you've come a lot way from seeing how strong something is by using weights and concrete slabs, to a hoist system!! (Shows how long I've been watching lol)

Stuff seems like it would be useful to keep around the house and work shop.

This seems perfect for preppers. Or even as a survival item.

I feel like the bag falling was a group-thought experiment - I can't be the only person who wanted the bag to finally fall. It felt like the screensaver scene in the office

Great video Tyler! I would've loved to see you use the screws that were in the saw handle with this. Can you drill through it easily to make the screw holes? I think that would be really interesting. Does it get pliable again if left in the sun or in a hot car?

Oh hey! This reminds me of my job! i work in a plastic pipe factory and take the left-over plastic grind it up with a huge grinder and then put that into a machine called a pelletizer that heats it up, pushes it through a screen then cuts it into tiny pellets. Those then get made into more pipes! ^)^

This stuff has been around in the miniature community for ages. We use it to make molds for casting, simple small parts.

I cant help but laugh everytime i see him use a saw of any kind to cut wood😂😂

Make a jar out of with a lid, kind of like a cookie jar type, then you can store pickles in it

That may be the only youtube sponsor that I've ever actually been interested in lol

Tyler you are very entertaining !!! Cant Look Away!!!

I prefer Worbla pellets for moldable thermoplastic but these are pretty cool

I'm not a professional wood "sawler" lol love your videos tye you should see if you can stop a leak in a 5 gallon bucket with it

Pretend it's the apocalypse and you need some protection and self defense gear. Like maybe like a set of knucks, a spear, or a recurve bow handle. Be pretty cool

I could actually see this being really useful to make tools that are non conductive and won’t set off a metal detector or stick to an electromagnet. This would be awesome for like a custom lockpick set, or bypass devices. Great way to have tools on you in a nonpermisive environment.

I’d be interested to see if you could make a fish hook out of it or a arrowhead, spear point for survival.

Tyler is like the Aldi's brand of myth busters and I love it

In regards to the full plastic hammer, you could get some pipe fittings and pipe, full with lead and mold around it and make a dead blow hammer. That could be neat!

The saw looks good. It was wobbling about because of the wobbly work bench. 😆

You should make the hammer again but this time with a metal or rock core :0

The first thing I thought was maybe you could make a deadblow hammer with that on marring hammer looks like it would work pretty well for that.

Looks like very useful stuff!!!

loved the handsaw grip toss, quality 100% 😂

Trying making a ladder out of instamorph. I'd love to see if that would actually hold up but that would obviously be a lot of material lol.

hey Tyler, love yours vids and this sponsorship definitely interested me as a new home owner! i really hope that you can give us an update on how your lawn looks and reacts to it in the coming spring and summer!!!

That’s awesome you’re sponsored by SUNDAY! I saw a commercial for them and I think it’s cool.

Definitely want to see more! I'm gunna buy me some and mess around with it lol

I’ve been using this stuff for years, it’s awesome. You can use silicone molds with it too

Maybe if you molded the chain link and then threw the whole thing back in the water to make it soft and bond the ends to each other more. I think it might get that 600 pounds !!

I have used it with an old hotwheels mold kit to make hotwheels cars. Smash it down around something to make a mold you can use to make copies of things.

looks like it'd be a good soft mallet, good for hammering in wood joints you don't want to ruin with a normal hammer, or maybe even for leather-work.