You need this soldering Iron in your life! Auto Feed

You need this soldering Iron in your life! Auto Feed - one handed soldering!

Рет қаралды 11,215

Жыл бұрын

You need this soldering Iron in your life! Auto Feed - one handed soldering!
Sometimes you do not realise that you needed something until you got it. Finally a way to speed up those through hold solder joints!
Amazon has these:
UK: amzn.to/426Lzyb
USA: amzn.to/3LuRtSw
See my recommendations on Amazon: www.amazon.co.uk/shop/backoff...
If you would like to buy me a coffee or support the channel you can do so via Patreon at / backofficeshow
I do have some bits and pieces on my web store at backofficeshow.com
Please note: As an Amazon Associate I earn from qualifying purchases. As such links to Amazon products within this video may fall under this. Thanks to all of you who use these links and help support the channel - you are fantastic!
Thanks you lovely people, and keep on tinkering!
Come chat with me on discord / discord
See my recommendations on Amazon: www.amazon.co.uk/shop/backoff...
If you would like to buy me a coffee or support the channel you can do so via Patreon at / backofficeshow
I do have some bits and pieces on my web store at backofficeshow.com
Please note: As an Amazon Associate I earn from qualifying purchases. As such links to Amazon products within this video may fall under this. Thanks to all of you who use these links and help support the channel - you are fantastic!
Thanks you lovely people, and keep on tinkering!

Пікірлер: 36

@SianaGearz Жыл бұрын

I don't have this style of solder sucker yet but i might not hate it. I use a modified ZD190. For one i have cut away the sheath, since my thumb won't reach to the plunger top button; and i replaced the slanted plunger top with a 3D printed one of my own which is flat. Now here i could cut if off just the same, but the plunger top is already flat. Like this, i can reset the solder sucker by whacking it on my thigh instead of trying to do it with my thumb. Recently i added another modification, i shortened the tip just a little and pulled a piece of RC fuel line (silicone tubing chemical and temperature stable, 4mm OD, 2mm ID) over the tip. This make it more similar to the Engineer one again. I really like this modification, it has been an improvement. If i end up manufacturing something and need to optimise efficiency, i may consider this gun, i'm sure it can be set up to not cause trouble, and the way they had it from the factory with solder not going on the very tip is likely the way to go, but i don't feel like i'm likely to need or want it - i might as well be better off to develop a nice fixturing setup for whatever it is i'm making and just feed the solder with one hand and solder with another.

@travisstamp7428 9 ай бұрын

17:13 "have a lil butcher's at whats in there"😂 i love cockney slang

@backofficeshow 9 ай бұрын

We all used to speak like that growing up in London. A Mish mash of cockney, estuary and Jamaican

@choochoochooseyou 7 ай бұрын

Just got one. Yet to use it. Thanks for the warning about the solder coiling up inside.

@backofficeshow 7 ай бұрын

There is a learning curve, at the end of the day you are pushing on a rope, so it's amazing it works at all 🤣

@intelcorei0364 4 ай бұрын

Looks handy for thru hole components when you need to hold it so it wont fall

@backofficeshow 4 ай бұрын

It's one of those things, you can get by with a regular iron, but when you need this, you really need this!

@MrJozza65 Жыл бұрын

That's an interesting concept; with improved quality on the ratchet mechanism, and variable temperature, it could be very handy for automotive or other awkward jobs where you need 3 hands. Not sure if I would use it for PCB work though.

@HardWhereHero 4 ай бұрын

There is a new green and orange model that's 80 watts, the feed mechanism on the inside is definitely built better than this one, it's also a three-prong cord with a ground. (Never use two prong soldering irons on PCBs unless you want to destroy them) I bought one and actually like to use it on PCB where I want to be super accurate on using a tiny tad bit of solder

@SplendorSolis Жыл бұрын

JBC actually sells a much higher quality, more reliable version of this tool model number AP250-A; it's much more expensive though and requires a station. There's also the AP130-A and a more traditional wand-style AL250-B.

@backofficeshow Жыл бұрын

I would be really interested to see how the feed works on their one. I think that is what makes it breaks these devices

@SplendorSolis Жыл бұрын

I agree, this is a great idea especially for disabled individuals. With a better mechanism, I'm sure this would function much better.

@backofficeshow Жыл бұрын

After using it for a while now, I have developed a knack for it. As long as you give the joint time to heat up the solder will not bind up. With a little flux it really is quite fast

@HardWhereHero 4 ай бұрын

Good looking out.

@ovalwingnut 3 ай бұрын

Oh my. Just saying... Thumbs up however.

@alexstone691 Жыл бұрын

I've seen one for like $10 in local chinese shop, thought about it but nah i dont have enough solder as it is with these crazy prices 🤣

@backofficeshow Жыл бұрын

I might pick one up from Ali express, they sent to have a few different models, maybe they have a motorised one!

@alexstone691 Жыл бұрын

@@backofficeshow That could be cool, maybe you could stick it onto a proper soldering iron, this one looks like a clone of hakko in terms of build

@tonalaxis Жыл бұрын

What a faff. Lol

@backofficeshow Жыл бұрын

I think a temperature control is over thing it lacks. That would be a good improvement

@sham1234567891 5 ай бұрын

Great stuff. Is it possible to convert this iron to cordless?

@backofficeshow 5 ай бұрын

Extremely unlikely

@mike_t_007 4 ай бұрын

Amazon sells a battery version for like $50-60

@itechhen 13 күн бұрын

If you have a vape mod box with a 510 thread on the deck (even a single 18650 cell mod) you can buy 510 soldering tip from temu and screw the soldering tip into your vape and use it as a soldering iron. There is a video on this on KZfaq, so if you need a cordless soldering gun, that is an option.

@donnatrump1403 6 ай бұрын

Can it be used on a gas tank with gas?

@backofficeshow 6 ай бұрын

I wouldn't recommend it!

@TheOfficialOriginalChad Жыл бұрын

But no temperature control?

@backofficeshow Жыл бұрын

Alas that is the case. But in his important that is I guess it depends on how you run your iron. I tend to leave mine on the hot side. No different than traditional irons really

@TBD3.0 Ай бұрын

Absolutely not.

@JohnJones-oy3md Жыл бұрын

If I ever lose a hand, I'll reconsider. Barring that, what a cheap, useless device this POS appears to be. Still, appreciate the review. 👍🏻

@HardWhereHero 4 ай бұрын

The solder that's included with these kits are absolute garbage do not ever use them for repairing PCBs or electronics. You want to use a three-pronged soldering iron one with the ground wire If it doesn't have a ground wire it's not worth destroying your components. Also you want to use solder with a low melting point for electronics as well let's say you're working on a console or a computer motherboard They all use low melt solder. Don't use ANYTHING ELSE or again you will ruin your components I've been soldering for 20 years, I was taught to solder by a man who soldered for 75 years of his life and worked for the military. My pawpaw could solder a mainboard while cramped up in a m1 abrams, while getting shot at, with a fire in the rear passenger compartment. I know this because it actually happened and him repairing their communication equipment was the only reason they made it home mostly alive.

@vytautasslenderis2702 8 ай бұрын

Nasty

@itechhen 13 күн бұрын

Tips are not compatible with and wood burning tips. I would rather see an auto feeding soldering gun with interchangeable tips like the ones that screw in with a wood burner/solder kit. Because once your tip is worn out, your done. 👎 also the picture on the box is for the wrong gun

@ukzoinks Жыл бұрын

Looks like a child’s toy. Janky as a janky thing. And how long until the solder drips into the nozzle and permanently blocks it. Can’t imagine it will be any good whatsoever for SMD. I watched to the end so you’ll get your engagement credit 😀 but I won’t be buying one.

@backofficeshow Жыл бұрын

Definitely only a through hole tool that's for sure! I'll show it to you in person some time, not as crappy as it looks. I was using it in anger this week, and definitely earns it's keep, albeit for a specific use case