You NEED to see this case

Рет қаралды 285,505

Күн бұрын

Sponsor - Head to www.manscaped.com for 20% OFF, Free International Shipping and 2 Free Gifts when you use promo code BITWIT at checkout.
Check out the HYTE Revolt 3: hyte.co/bitwit
Enter the PC giveaway here:
*PARTS*
HYTE Revolt 3: hyte.co/bitwit
Intel Core-i9 11900K: geni.us/D2jOHAe
Asus ROG Strix Z590-I Gaming: geni.us/8afh
Trident Z RGB Neo DDR4: geni.us/rfYHj4A
MSI RTX 3080 Ti Ventus 3x: amzn.to/3yxtnhn
Corsair H115i RGB Platinum: geni.us/SA5Dt
Crucial P5 Plus PCIe 4.0 NVMe M.2: geni.us/peF0bw
__________________________________________________
*TIME STAMPS*
00:00 Intro - Inside the Box
3:50 Exterior Features
6:06 A Look Inside
7:40 PC Building
20:10 How much does it weigh?
21:13 Thermals & Acoustics
25:12 Closing Thoughts
___________________________________________________
OUR STORE - Buy quality items while supporting us
BECOME A MEMBER - Because perks.
-bit.ly/bitwitmembership
-Link for iOS users: / @bitwit
FLOATPLANE - Get early access to our videos 1 week before they hit KZfaq
Watch my videos a week early for $3/mo: bit.ly/2xI0n89
FOLLOW ME on Twitter & Instagram @bitwitkyle
CREDITS
Epidemic Sound - www.epidemicsound.com
Bitwit
/ bitwit

Пікірлер: 733

@beryyjams 2 жыл бұрын

"Pretty toasty gpu" Laptop users be like: "oh thats nothing"

@jakeoshay 2 жыл бұрын

It's the inbuilt keyboard warmer, feature.

@boomshya8334 2 жыл бұрын

mine reaches 94, bcuz capped at that

@mrducky179 2 жыл бұрын

89C? oh im just playing minecraft with shaders

@wahib7901 2 жыл бұрын

I have a gtx 750ti running my pc at low quality at 30 FPS mannn

@maewemeetagain 2 жыл бұрын

"it's portable doe"

@Weezedog 2 жыл бұрын

HYTE had me at vertical with no riser cable and reasonably priced. Been wanting a vertical NR200.

@KeenVanguard 2 жыл бұрын

I just built a streaming PC in the DarkFlash DLH21 I think it's slightly smaller than this case. I have a nr200 as my primary PC

@souljastation5463 2 жыл бұрын

It's time for the clones of the Meshlicious. I've waited years for a case like that and now, just a couple of months after the meshlicious went available, there's already the first clone. And something tells me it won't be the last.

@Rman0712 2 жыл бұрын

Agreed. Especially after that whole H1 debacle, not having to worry about a riser cable is nice.

@boah-ist65 2 жыл бұрын

I mean, it kinda is a vertical nr200

@RoasterOven 2 жыл бұрын

I've used two sfx cases with riser cables, only problem I had was with the meshlicious 3.0 riser. all I had to do was unplug the gpu, and connect to motherboard graphics and change bios PCI-E from gen 4 to 3 and it works fine.... The Silverstone sfx cases have gen 4 riser boards Im not sure why people are so scared of riser cables

@gamertrem1884 2 жыл бұрын

Cool SFF case. Looked like a breeze to build in too. The hanger on the side is an awesome addition. Nice quality of life details. Good start for this brand!

@theNerdandtheNurse 2 жыл бұрын

Kyle, I wished you flipped those AIO fans around to test the temps with them exhausting air...

@Roger_Diz 2 жыл бұрын

I was thinking the same. A lot of those little cases love negative pressure. His cpu temperatures were awesome through the entire test so it seems to me that ejecting all the hot air from the video card should be his top priority.

@SuperAzzlackstyle 2 жыл бұрын

Yeah, PS, Graphics and AIO are all on intake. It's like he never build a PC before.

@yuxia5989 2 жыл бұрын

The things is the air is not heated that much by cpu, the cpu is like what, under 100 watt when gaming, the air comes out of the radiator is only somewhat hotter then fresh air, warm for sure, but not hot, but the 3080ti is like 350w+, I have a evga 3080ti ftw3 and it's insanely hot, and it's gonna rise your cpu temperature significantly if your radiator takes in what comes out of the 3080ti

@distelmarc 2 жыл бұрын

it looks good, i love the industrial look. it does remind me of an apartment building, though, which is kinda cool if you do like a post-apocalyptic theme to it. it looks simple enough to build it, and having a PSU pre-installed from the factory is a major plus, especially since SFX PSUs aren't super common like ATX PSUs. I think they went well above and beyond for making an easy to build in small form factor PC for new people in the market.

@GivemChills 2 жыл бұрын

Bitwit: "You need..." Me: "Say less"

@bimmer.sh0ts 2 жыл бұрын

Less

@rezz5570 2 жыл бұрын

less"

@Upracefan 2 жыл бұрын

Switch the fans on the AIO to exhaust instead of intake, made a significant difference in the Meshlicious case.

@harvey5738 2 жыл бұрын

Yea he calls the GPU toasty but has the fans oriented wrong. I was about to yell at the screen lol.

@SuperAzzlackstyle 2 жыл бұрын

Y that tech noob has intake on front, top and backside.

@353darkesthour 2 жыл бұрын

Lyle?

@brikswrld8320 2 жыл бұрын

What’s the best fan layout for nr200p I have a 240mm aio

@SuperAzzlackstyle 2 жыл бұрын

@@brikswrld8320 bottom in top out

@jamesradney5560 2 жыл бұрын

I am not normally a SFF fan, but I got to say I am kinda digging this case! Looks pretty sweet and the handle and headphone hangers build in are a very nice touch!

@MrNineties 2 жыл бұрын

Actually pretty intrigued by this case honestly. Love the aesthetic. The handle and headphone rail are the cherry on top.

@PabzRoz 2 жыл бұрын

IBuyPower: Are we copying the meshalicious? IBuyPower: You bet your damn ass we are.

@Laborchet 2 жыл бұрын

Just got a meshlicious, comes in on Tuesday and can’t wait for my first Sff build! This case looks a bit clunkier but I like the psu mounting location and cutout, but I do not like the MOBO IO being inside rhe case

@gr82banautiger24 2 жыл бұрын

What I like is no riser cable required, almost all SFF cases require a riser cable, and this one does not. That's a huge plus as they fail, not to mention the problem's with pcie 4.0 board/gpu and a pcie 3.0 cable.

@jhonmichaelcastro17 2 жыл бұрын

You might want to take a look at the new Cooler Master NR200P Max, it comes with a PCIE Gen 4 rissr cable, a higher capacity power supply and a 280 mm AIO with 2 fans.

@RYzE_B3Y0ND 2 жыл бұрын

Ncase M1 doesn’t. Though I really love this tower style.

@HighCastle0824 2 жыл бұрын

Fractal Design Nano S. Supports a full size atx PSU and even custom loops.

@EEE-ro5px 2 жыл бұрын

Ayo go tigers!

@haroldchristiangravador4187 2 жыл бұрын

This video just convinced me to get this case. So easy to build in, has a prebuilt PSU, small footprint, compatible with large radiators and GPU, and a nice minimalist look. The headphones hanger and the case handle are a very nice bonus. I'm getting the white variant.

@nocelebrity6042 2 жыл бұрын

20:12: Before weighing the fully-assembled computer, Kyle lifts the case by the handle to check to see if the computer is too heavy for the handle to carry. Good looking case. Great video!

@xmxhmxtx 2 жыл бұрын

okay?

@mutasimrahman6833 2 жыл бұрын

I think having the fans as exhaust would benefit GPU temps more. Awesome build btw!

@DreWhite100 2 жыл бұрын

Awesome case!! I was worried about the thermals when I first saw it, but performed very well. Nice to see

@yoloswag5851 2 жыл бұрын

Cool! First the SSUPD Meshlicious and now this. I'm glad that we're getting some quality case choices for SSF builds!

@artieartya 2 жыл бұрын

Love this case now I finally got motivation to start my next build.

@inmypaants 2 жыл бұрын

I think running the radiator fans as exhaust would help pull fresh air through the GPU.

@eveypea 2 жыл бұрын

I agree. I'd love to see if using the AIO fans as exhaust would change the thermals

@stuartlunsford7556 2 жыл бұрын

I love that a company notorious for sealed glass boxes of firey death...has pulled their heads out of their asses and added tons of airflow. Good Job!

@danw5476 2 жыл бұрын

I think the headset holder(s) being built in is a very nice touch, and, in hind sight, seems obvious! :) Good job HYTE

@MoCo_Filmmaker 2 жыл бұрын

Love the case seems pretty well priced too. I like that you can tell some thought went into build experience as well.

@experiment18a40 2 жыл бұрын

Normally with most sff pc cases you want to encourage negative pressure to help the gpu get the cooler air. I think swapping the radiator fans to exhaust would help alot

@GodisGood941 2 жыл бұрын

Im glad you’ve been doing better! Last year didn’t seem to be a good year for many of us so im glad this year is going better!

@michagabo8819 2 жыл бұрын

When things were at their very worst: 2 Suns, Cross in the sky, 2 comets will collide = don`t be afraid - repent, accept Lord`s Hand of Mercy. Scientists will say it was a global illusion. Beware - Jesus will never walk in flesh again. After WW3 - rise of the “ man of peace“ from the East = Antichrist - the most powerful, popular, charismatic and influential leader of all time. Many miracles will be attributed to him. He will imitate Jesus in every conceivable way. Don`t trust „pope“ Francis = the False Prophet - will seem to rise from the dead - will unite all Christian Churches and all Religions as one. One World Religion = the seat of the Antichrist. Benedict XVI is the last true pope - will be accused of a crime of which he is totally innocent. "Arab uprising will spark global unrest - Italy will trigger fall out" "The time for the schism in the Church is almost here and you must get prepared now" The Book of Truth

@NeiradTheGoat 2 жыл бұрын

@@michagabo8819 what the actual fuck?

@rookie693 2 жыл бұрын

@@michagabo8819 I have no idea what the fuck- you just said

@icanthelplt9061 2 жыл бұрын

I want this! I would cut out the ssd try to have more exhaust for the gpu and then custom length cables to help with the management. Man, this seems like such a fun case with a lot of possibilities.

@ocbroadband 2 жыл бұрын

I think 'Lyle' needs to make a visit again 'Kyle'. Had to go back and watch a few. Such good stuff! -Lyle

@atruceforbruce5388 2 жыл бұрын

On look at da cpu why you use the thermal paste why not you use the sweet and sour sauce, why you think the chineesey food hotter than the other food when you order delivery because it handle the hot better than the thermal paste and not onry Dat but after building computer for long time you have snack, so you don't go hungry. It's way coorer when it's hotter.

@Riddler290 2 жыл бұрын

Wifey sauce took Lyle in the divorce....... To soon

@atruceforbruce5388 2 жыл бұрын

@@Riddler290 some girs don't know how to love a man long time only short time.

@Cary_mac 2 жыл бұрын

We miss Lyle so much

@BrianDickens4 2 жыл бұрын

Wow, first time I catch a video moments after it's published :) Watching it right now. Nice way to package a case. :+ By the way, many thanks from over here in the Netherlands -- your videos are much appreciated!

@Sinsanatis 2 жыл бұрын

looks pretty good. and the double headset hangers plus the handle is really nice

@Subdubbin 2 жыл бұрын

Very good-looking case, besides some of the panels appearing to not fit perfectly. Looks like they raised the motherboard I/O up enough where you can fit regular display port cables and not have to use right angle adapters (unlike the Meshlicious.....) Sounds pretty affordable too.

@ahnilatedahnilated7703 2 жыл бұрын

Great video Kyle! Everyone is so worried about dust but use a data vac, compressor, compressed air and once every 3-6 months you clean it.

@d0gmaticsoul 2 жыл бұрын

That looks so cool. Very nice job Hyte.

@Mart-E12 2 жыл бұрын

I would say an amazing case, looked incredibly easy to build in and I really like the motherboard orientation with the GPU in the front

@Kdude216 2 жыл бұрын

I'm so glad the case buttons (front I/O) are at the bottom!!!

@hytebrand 2 жыл бұрын

Thank you so much again for doing this build! Thne Revolt3 is a great case if you plan to take with your pc anywhere with you. 🙏

@DemiLovatosSpoon Жыл бұрын

He is the reason I’m building one right now. Just need a psu 😞

@Cyan1de1312 2 жыл бұрын

Those front panel connectors made me tear out of joy

@IcalebthelionI 2 жыл бұрын

One thing I’ve learned building SFF is you should always opt for active exhaust

@SilentRito 2 жыл бұрын

this is actually impressive im going to keep my eye on this one for when i eventually do manage to build my next rig

@fred4derf799 2 жыл бұрын

I have been waiting to pull the trigger on a ITX case for over a year now. Just pulled the trigger on this case!!! Needed a case that had the IO at the bottom. The plan is to run my cables through my desk. Have a nice cutout under the PC and run them under the desk without seeing them. I cant wait.

@exia989 2 жыл бұрын

I'd be curious to see how a full custom watercooling loop would work in this case

@greenowl.6795 2 жыл бұрын

the case is very nice i enjoy watching your vids they inspired me long ago to build my first pc just felt like coming back and thanking you for all the good vids

@JohnnyStashh 2 жыл бұрын

try switching the radiator fans to outtakes, im curious to see if it make a cooling differences.

@LuxTheSlav 2 жыл бұрын

With the amount of mesh, I'd run it in positive pressure. Otherwise, you might as well clean it every week with the amount of dust it'll suck in.

@munster1404 Жыл бұрын

I have the radiator fans set to exhaust (the fans are inside the case). Since I live in the tropics, ambient temperature ranges from 28C to 33C. CPU (I7 13700KF) temperatures ranges from 65C to 80C while gaming and GPU (RTX 3080) ranges from 55C to 65C. I can’t run Cinebench in this setup because the CPU will shoot as high as 100C. But since I’m using it as a gaming rig rather than video rendering, 100 degrees is technically impossible to hit during daily usage. Because of the lack of auxiliary cooling options. I’m considering attaching a USB powered 90mm or 120mm fan externally using a magnetic strip. This should push cooler air and feed the AIO radiator fans inside.

@VEN0M415 2 жыл бұрын

I wish more brands would make ITX standing cases, I love my Phanteks shift but I wish they could start a trend of making adjustable exhaust vents for different GPU sizes so the heat wont be trapped or recirculated letting cool air can get in easier without the need to put holes everywhere. also they really need to come with Gen 4 risers as a standard now lol.

@plasmancer6104 2 жыл бұрын

Along with the handle, now All we need is the headset holder to clip around along with one for mouse and keyboard so you could carry your whole set up at once

@Superagent666 2 жыл бұрын

Really wanted that new G.SKill case that they just released but can't find it anywhere. This one looks like a strong contender for it. Good job HYTE!

@johnjoubert4235 2 жыл бұрын

I love that the cables all route to the bottom. To me, all the cables abd io going to the top is the biggest issue with the evolve shift line.

@seanroach8126 2 жыл бұрын

Kyle: I love applying thermal paste its so SATISFYING Also Kyle: Thank you, pre-installed thermal paste.

@Cary_mac 2 жыл бұрын

Dude Kyle thank you for this. The Meshlicious didn’t do it for me so I used your link and picked one up! This case just looks so well engineered.

@j-bro 2 жыл бұрын

Gotta love all the quality of life stuff packed into that little boi. Nice job

@sandmann521 2 жыл бұрын

Cool case. Would have liked to see the radiator fans set to exhaust instead of intake. That alone would probably help the with the GPU temps, and there's plenty of headroom in the CPU temps that it would be good to trade some CPU cooling for more GPU cooling.

@konic40 2 жыл бұрын

love that hinge for the radiator

@Razear 2 жыл бұрын

Would love to see more case manufacturers embrace full mesh on all side panels, especially with these smaller form factors where you're looking to get as much airflow as possible.

@sashagelert9320 2 жыл бұрын

"Have the radiator fans as intake so the CPU gets fresh, cool air instead of hot GPU air" later... "GPU seems to be runnin a little hot, let's adjust the front panel cover... no, i think we just got a hot GPU runnin in here" That all said, this is definitely a very well designed case, and might be a contender to replace my 5 year old QBX Kaze.

@BRBearUSA 2 жыл бұрын

Really cool and compact case. Tks.

@TokenaiNamae 2 жыл бұрын

I had the MSI 3080 Ventus 3X OC and was weary about the cooling off the card, so honestly not surprised that the Ti variant of the card wouldn't be so different in terms of cooling. I swapped it out when EVGA contacted me about the queue in a heartbeat and sold the MSI card very cheap to a good friend.

@ilijadjuranovic 2 жыл бұрын

This case is must have for me, before, I looked on NZXT H1, but that riser cable crap puted me away, tnx Kyle, waitin for HYTE to start sellin in Europe

@AlanCturk1992 2 жыл бұрын

I bought prebuilt pc from Ibuypower in 2015 and never really cleaned it either, but I never had an issue with it ever, worked great

$@fracturedlife1393$

@fracturedlife1393 2 жыл бұрын

Need a "Top Rear IO" case like this, pretty cool little case.

@TristanTradgedy 2 жыл бұрын

Those mesh panels do catch a LOT of dust to be fair. Why couldn't it be magnetic though instead of screw in?

@MireSeVini 2 жыл бұрын

Doesn’t look as sleek as my meshilicious but I could be biased. Thanks for building in this! Big fan of ITX content.

@harshlens 2 жыл бұрын

This can easily be fully watercooled, I am curious what the temps would be. It would be nice to be able to buy tempered glass panel for those that go full water cool.

@philthyphil1017 2 жыл бұрын

Agreed

@SoulRollerFIN 2 жыл бұрын

I'm willing to bet that it's gonna have like 10 degrees cooler temps if you installed some exhaust fans. Just like the NZXT H1.

@gabiballetje 2 жыл бұрын

Seems like a great case indeed, the only thing is you need to make take care that no air gets trapped in the pump, turn it on and move the case around a bit so the air if it has not already gets moved out of the pump and end up in the radiator, and you're good to go. And that it fits a big GPU and still seems to do nice is pretty nice. And indeed a great LAN-party build with that handle, not that anyone really ever does those things anymore, do they ? But nice for business, or yeah, just playing with a buddy.

@eveypea 2 жыл бұрын

Moving any possible air out of the pump would be as simple as running for 10mins on its side with the radiator at the top

@CraigLillie 2 жыл бұрын

Dang, I'm sure as heck gonna take off all the metal mesh parts on my Cooler Master H500P Mesh & paint them either Gold, or perhaps Copper. 😁

@ginagfe 2 жыл бұрын

3:51 “Can I do this one-handed while filming” Me: 😳😳🤔

@sijcecilio 2 жыл бұрын

Optimum tech must be so happy right now holy

@sephstreamtv2360 2 жыл бұрын

Nice case modularity.. And also you can manage the cables more neatly.. On that case i wish we could have that one to in manila..🥰🥰

@emp1985 2 жыл бұрын

Looks like an excellent competitor to the Meshilicious. I like the size and looks of the SSUPD one better though.

@Matt-ux8hh 2 жыл бұрын

It actually looks very similar to the Darkflash DLH21, which is another SFF mini itx case. This one seems to have more features though plus allows for a longer gpu and larger AIO even though they are relatively the same size. However, the DLH21 comes in more colors and has RGB integrated into it. It's also cheaper.

@ignignxkt 2 жыл бұрын

Purchased! Can't wait!

@leker485 2 жыл бұрын

I think I would have mounted the fans as exhaust, I think the GPU is so toasty because the heat just isn't really going anywhere. CPU thermals would hurt from it a bit, but we wouldn't know how bad until we try it.

@dangdiggity9916 2 жыл бұрын

Seems like an amazing case c: still loyal to my entho evolve, especially if it gets another version after the x for those OG owners to upgrade to as the x isnt worth it alone. would love to see a case like this for a bigger system :p

@DanielNavas1 2 жыл бұрын

I’ve got the 3070 2x version of that MSI card and it too gets hot. I’ve had to undervolt the card in order to maintain a steady temp at about 72°C. The card is also in an open air case.

@cmarco3702 2 жыл бұрын

thanks now i know i don't want this one

@269bp 2 жыл бұрын

Put the AIO fans to exhaust and pretty sure the temps will drop. It will pull in more fresh air from outside the case. Worth the try !

@H3llb0und 2 жыл бұрын

Yes. I was thinking the same thing. It doesn't seem like the GPU is blowing hot air into the AIO, it looks to me that it will blow it out from the side panel.

@TwinBladedAxe 2 жыл бұрын

A few months back I was bored and decided to draw a itx case design mainly layout of components and it was pretty much identical to the layout of this case. The only difference I had with mine was an exhaust fan at the top of the case

@antleverso4286 Жыл бұрын

Im a Fan! Mainly due to the front IO connection having a single plug makes it so much easier

@gdeeable 2 жыл бұрын

Really nice case/build.

@tastesgamey8572 2 жыл бұрын

striping a motherboard standoff... didn't inspire me to build another pc lets just say that.. Great video Kyle! case looks good

@Dragoninja833 2 жыл бұрын

I've built too many PC's and never stripped one. Make it snug and you're good.

@Nxck4587 2 жыл бұрын

I’m traveling next summer, so I’ll definitely buy this case and do a custom loop

@helpigotaquestion 2 жыл бұрын

A custom loop and fluids would definitely add some weight I would imagine

@mikegoggin570 2 жыл бұрын

Lovin' the increase in content, Kyle!

@japkap 2 жыл бұрын

Cool build

@ChuiBB 2 жыл бұрын

Loving the daily uploads. Keep up the great work

@d.b.8684 2 жыл бұрын

Very cool case, I like it. Great content as always Kyle.

@mrexile09 2 жыл бұрын

I’ve never liked SFF pc’s but this think looks pretty awesome. Would be cool to have some RGB in it so the light would leak out the small holes.

@anthonyholmes5965 2 жыл бұрын

I like the case. I’m looking to build a new home computer so I’m checking out cases and this is definitely a contender.

@Graphics_Card 2 жыл бұрын

I love how it says that this video was uploaded a few minutes ago when this video was actually uploaded an hour ago

@cg.l 2 жыл бұрын

bummer not a worldwide giveaway but still a great vid, its a pleasure watching you build this beauty

@AndreCroy 2 жыл бұрын

They want to improve the cooling invert the layout so all of the heat is going out the top but of course that making the cabling more challenging so give and take like always.

@Djoki1 2 жыл бұрын

13:08 This is what ive been thinking for the past 2 or so years after getting a part time job in a small local system integrator company. The mobo standard is already there (the pin layout is the same on almost every mobo that i encountered unless its a special case like some SFF Dell or HP machine).

@jGRite 2 жыл бұрын

I was waiting for this case, but I wasn't 100% sure it would fit a DTX motherboard, so I passed on it and got the Meshlicious.

@crisnmaryfam7344 2 жыл бұрын

Should have taken the 5 mins to hook up the RGB. Regardless of not being able to "see" most of it. It would still make a nice subtle glow especially in low light situation. Could even use that "fire place" simulating light scheme. Also, should have has some sort of exhaust for that gpu...

@munster1404 Жыл бұрын

@Made1nPortugal 2 жыл бұрын

Halfway through the video, looked at your shirt and thought it was a sweat patch. Hahaha

@Kappa-G 2 жыл бұрын

One of my favorite case of all time now.

@ameerzs1313 2 жыл бұрын

You gonna reduce atleast 5 degree C if you turn the fan to exhaust instead. Intake will only accumulated hot air inside which affected the gpu. Fresh air is irrelevant in aio itx setup since the cpu is cooled enough. Give some space to gpu

@Lune1858 2 жыл бұрын

I literally just bought the meshlicious and built in it and then I see this video and this case looks so much better and easier to build in. 😢

@DougYale 2 жыл бұрын

Downward facing exhaust on the GPU. I'd be shocked if it wasn't so hot. Looks like a beautiful case, just not well ventilated for the GPU. CPU rad can exhaust out the top which is why it's so much cooler.

@poiisondn 2 жыл бұрын

pretty neat case!

@MRDEEGAMING 2 жыл бұрын

Loving your videos ATM been a while since I've watched but I'm glad I'm back watching 44 videos in a playlist that's my night sorted

@mr.hughes6363 2 жыл бұрын

They took a Cougar QBX case and put it on it's end with mesh all around and a handle. With the CPU radiator fans blowing all that exhaust right back into the GPU the temps are expected. Flip the radiator fans and try it that way, I bet temps will be much better. No mesh panel insert is a good move too.