Putting a new roof on my shed. Watched a lot of roofer videos. One thing I found out. Everybody does something different. So what do I do? I pick the guy with the best presentation. You're a good speaker, you stick to the facts, you don't have an attitude, and you don't tell me a bunch of stuff I don't need to know. You're above average. Thanks

Man your a brother and a good one. You don't know how much I needed to listen to your advice. It humbled me and thank you for sharing it. I hope you read this and know how you helped someone's life today.

Thankyou so much for this!!! I've converted the unvented electric stove in my kitchen to a roof vented gas range. I appreciate the easy going, yet straightforward pacing of your instruction, and all the essential tips. From tools to hardware, all the details... simple enough for even an "average " DYIer likè me! You're everything I ❤️ about KZfaq.

People who share their knowledge are awesome

Next time show us how to cut the roof too? :)

Thanks so much for posting this video! Just installed 4 roof vents on my garage roof and your video was exactly what I needed.

Thank you so much I'm going to do my roofing courses next year and apply for my apprenticeship. I'm just studying and teaching myself through your videos and other online sources. I work with roofs as a gutter cleaner, window detailer, work is slow now because of winter. There not much work so I'm spending my time learning new skills!! =D Your videos are clean, simple, and detailed!

Shouldn't you make a whole in the plywood then install the vent?

Thank you your video was the best explanation compared to others. I did our 2" roof vent pipe boot still need a refresher. I like your positive message " I don't have to be the best but, the average"

Thanks Dylan! You are a great instructor,appreciate you sharing your knowledge

Good install, you should mention for the newcomers, never install the vent before the hole is made. If you're gonna make the hole, make sure your not over a rafter. I once cut a hole thru plywood that had shingles under it and set the attic on fire.

Embrace the ‘average’. Great demonstration. Stay Average my friend >>>

Thank you brother for pointing out gramadine self sealing roof screws 🙂

This has became one of my favorite channels man. Keep the content coming.

Newbie here. Was expecting an example of cutting a hole through the roof decking before installing the vent🤔

I don’t see u being average and so nicely explained u r top line thank u for posting

This is the first video of yours on my feed in a week.

I really appreciate your time making this. Im about to put 2 roof vents in our florida room, as it gets way too hot even with ac going. Thank you again

Thank you very much for breaking it down so simply, I really appreciate the time you took

The Pro 50s have small dash lines now where the vent should sit on the hole for proper ventilation. An easy template for the vent cut is to use a shingle. The height of the shingle is the same width as the exterior vent cover.

Definitely not average, you’re a pro!

Thank you for the detailed demonstration and explanation of how to install roof vents!

This guy should get a shingle tattoo on his forehead😂

He's a good teacher.

I don't care what BDR says, you do a great job.. Average tiiiiime!

You keep making videos like this you won’t be average anymore bud, great video, clear instructions, 10/10 would bang 😂 Stay average 🤘

One of the best descriptions ever!!

WOW. You made that stupid easy. Thanks for this video!

Great video, you make it look so easy and quick. Thank you again.

I like the I am Canadian shirt. I have one that says my Wyoming has an east infection!

Thanks for this! Just installed my first vent for a stove.

BTW quad lasts about as long as a roof i believe. Siders use it on LP n I can only imagine it last 20+ years. I couldn't find anything about the exact lifetime of it though I just tried to search. Someone on my video suggested neoprene nails.

Average roofer, not so average intro, I thought I was watching a Michael Bay film for a moment there 😂

Up here in Canada, you would be making snowmen in your attic at Christmas time and a good wind will put your vent on your neighbor's roof.

Thanks for this! Was exactly what I was looking to learn how to

GOOD JOB DUDE! - You're a good instructor.

Install your vents before hand is much easier

Thank you so much I made the job go by so fast I appreciate it have a great day

gaf is awesome

Exactly the way to do it. Great work buddy.

Good tutos for an existing roof. Now, if i am installing new shingles. Is it easier, better to plan ahead for these or i should just install the whole thing and then only after making my cuts the way you are teaching here. Thanks.

Very helpful and concise video. Like your style.

That little shed don’t need no vents

Thanks for the video Bud.

I been doing roofing for 28 years and I never install air vents that way but every roofer has there way as long it doesn’t leak and it looks good all that matters. And what counts is that you don’t get a call back roofing in the northwest since 1995

For the upper box vent, how do you make sure you are between rafters?

Caulk? Why not tar?

I wish when you post a video that you would name the parts used and where to get the part.

Thanks for your videos it did help me a lot

Got some vacation time off and this is a project I will be doing thank you brother you made my day I was loosing my mind trying to figure it out how to prep and get started you make look so easy it should be a piece of cake

How is that vent snug fit into the duct? I mean you placed it flush on the roof, but where is the connection between the duct and that vent? Do you have go go to the attic to do that?

Great video... Ty

You need to put ice and water to prevent water going in,u could just remove 3 shingles and do it right,

How do you cut the roof plywood for the vents?

I had a hole in my roof. So i added a vent instead of simply fixing the hole. 😂

Thanks for the very well made video.

What are gromited screws and why didn't you install them?

You rock Dilly Wacker.

Nice work young man! However you should have mentioned the roof rafters.... you don't want to cut a hole over top of them.

Thank you so much!!! This is just what I needed!!!

I shopped at my big box store looking at roof vents. I think a video on vents and vent options would be good information to have. I have a roof vent fan with a burned out fan motor and lots of hail damage on the aluminum top. I'm going to want to replace that vent and install more ventilation in my roof without creating too many holes in my roof. Back in August I found a roof leak. Turns out it was a bullet hole right over my bathroom from last July stupidity of my neighbors. I caulked everything and it's holding for now but my roof has been damaged also from falling branches from my next door neighbor's roof. I think I'm going to have to hire a lawyer for that. My roof has an Eastern side and a Western side with hip roofs on the East and West. We have prevailing West and SW winds much of the year.

Really good video! Thank you

By replace it if damage do you mean blackjack?

I learned more on this simple presentation.. keep uploading man😍✌️

How do you nail the flange without damaging shingles?

Great video Thanks.

You videos are great just check sound.

If your just only allowing for a true exposure for second row of shingle above vent, for the vent your using, weather pro 50, you must cut plywood for vent hole right down to nail line of first shingle that is directly below vent flange. Your vent hole will be roughly 2-3” below the hole you initially cut out of roof deck. You should know this man.

Hope your doing good brotha

Thank you but what about the hole? You didn’t show how you to about cutting that

Don't you need to know where your rafters are first before marking and removing shingles? Won't be good to cut someone's rafters weakening the roof. I know that may be an "implied" step, but should've been mentioned.

Do you cut a whole in the wood or no

MUCHISIMAS GRACIAS DYLAN

Why dont u caulk under the vent

Thanks for the knowledge man. How do you calculate the number of vents you need on a roof?

Good video dilly!

Very good thank you brother,🤔👍

Thank you A great very helpful video !!!

For a new roof, should the vents be installed before the shingles?

Wouldn't the exposed nail heads allow water to seep through and down under the shingles?

I see many houses wot two rows of vents, one close to the ridge and one close to the bottom, is that a good idea and what’s the point? Thanks

Nevermind you don't have to cover the front flap. Sorry. Am learning . How to put swamp coolers in. Trying to figure out how to put the shingles around the base.

Great videos!!

What is the difference between shingles and roll outs ?

Thans good class

i trust you ‘cause of the la dispute tattoo

Does it make a difference what side of roof vent goes on? Also how many do you install and how far apart?

Thank you bro!!!!

Good video Thanks for the info

I know this might be a stupid question, but I am asking anyway. If that is a vent, why are you cutting a hole in the roof? Texas girl in Texas.

Great video

How do you put the shingles over the front of the vent lip

GAF FTW

Thank god some canadians came to explain zack made sound way to complicated

You should have shown cutting the hole because I know some novice ppl will forget that

Thank you! What part of town are you guys in?

Still don't get why the hatchet hammer. I use one, but only on a cedar shake roof. Does bdr cut the plywood 1/8 too big? I sharpen the shaft of my estwing for slight plywood modification.

excellent

Thanks buddy

I wish you would have use some calk so we could see. That seems to be the hard part