Z32 Polar Engineering Throttle Bodys Review & Install, The Nissan Z32 300zx Twin Turbo Mega Build.

No video

Z32 Polar Engineering Throttle Bodys Review & Install, The Nissan Z32 300zx Twin Turbo Mega Build.

Рет қаралды 1,165

6 ай бұрын

Today on "The Aussie Shed" I Review & Install The Polar Engineering Throttle Bodys. Project Fairlady, The Nissan Z32 300zx Twin Turbo Mega Build.
Quite a few traps for the Novice, watch the video for a Full Rundown.
The Best Throttle Body Bushings Available: www.upperhandp...
If you find my Content Helpful & would like to Buy Me A Beer, please do so, at the Link below.
Beer Money for The Aussie Shed,. Paypal: tinyurl.com/y6...
My Website that Carries some of the Parts I make. www.upperhandp...
Follow Me on
Facebook / theaussieshedd
Facebook www.facebook.c...
#theaussieshed #z32 #fairladyz #projectfairlady #polarengineering #300zx

Пікірлер: 49

@muddlersworkshop 6 ай бұрын

We dedicated watchers of your channel do not care how long your videos are, we will watch it.

@TheAussieShed 6 ай бұрын

Awesome Mate, thanks for the Comment, Cheers.

@rickymale8203 6 ай бұрын

Love the longer videos mate. All the best👍

@TheAussieShed 6 ай бұрын

Cheers Mate👍

@DCM300 6 ай бұрын

Enjoying your series of Z32 videos. Very informative. Entertaining. Your attention to detail is second to none. I own one of these cars and still love it. I'm a professional mechanic and you have taught me a lot. You are a great teacher and keep up the extraordinary work!

@TheAussieShed 6 ай бұрын

Thanks Dennis, appreciate the comment Mate. Cheers.

@WayneCook306 6 ай бұрын

Well done Trev great job, Nothing like a good grind Mate. 👍👍👍👍👍👍👍👍👍👍

@TheAussieShed 6 ай бұрын

You got that right. Cheers Mate.

@jeremysteib8378 6 ай бұрын

Awesome work! Thanks for all the time and effort you put into your videos to assist us with our installs! Cheers

@TheAussieShed 6 ай бұрын

My Pleasure Mate, Cheers.

@SeanEpoc Ай бұрын

really enjoyed the meticulous nature and attention.

@TheAussieShed Ай бұрын

Many thanks, Cheers Mate.

@hakinen4000 6 ай бұрын

great video Trev. I like the detail and explanation, wish I had the tool selection you have, like the lathe a mill, etc. Looking forward to the next one.

@TheAussieShed 6 ай бұрын

Thanks Rob, yes, the tools certainly give you options, after 2 divorces its a wonder I own anything honestly. Lol. Cheers Mate.

@devons2gda 6 ай бұрын

Great work Trevor! As always, I'm very impressed with your level of skill. Thanks for sharing your knowledge and thank you for not breaking the video into two pieces. Cheers!

@TheAussieShed 6 ай бұрын

Always a pleasure Mate, Cheers.

@codasinmurry 6 ай бұрын

Brilliant acting Gary even after an hour I still wanted more No one will recognise you. 👍👍👍👍👍

@TheAussieShed 6 ай бұрын

Top Secret Cover Gary, Top Secret.

@jeririch1143 5 ай бұрын

Just received my polar under plenum rail . Excellent quality. Thank you for the detailed vid on these throttle bodies for future reference!

@TheAussieShed 5 ай бұрын

My pleasure Mate, Cheers.

@frog7118 5 ай бұрын

Nice job cleaning up the top of your upper manifold. I stripped the bottom side of everything but the two freeze plugs and the four bolt on bosses and blended the outer flange to the lower manifolds profile and port matched them of course. No EGR flanges, no water manifolds, not needed, GONE. You can't see what I removed when assembled, but I knew it was there and didn't like it. Just like I removed EGR mount from rear of lower manifold and blended the profile.

@oldfarthacks 6 ай бұрын

True, nothing is as simple as it seems. Interesting. But drive by wire is always a choice. Anyway, it will be interesting to see this installed on the car.

@TheAussieShed 6 ай бұрын

G'day Mate, this is just the first stage with these units, Drive by Wire is where i'm heading with it, Polar Engineering has it currently in development. Cheers.

@perpetual_desolation 6 ай бұрын

Love ya Trev, my neighbours also hate my die grinder.

@kimber1958 6 ай бұрын

I will be back at it shortly just a little bit down wintertime blues, I suppose keep cranking out the great videos

@frog7118 5 ай бұрын

When I asked what was painted on the manifold side of factory throttle plates, I was told that was some kind of buildup. These are brand new throttle bodies and have what I asked about. Another clue that it was OEM applied? There are clearly brush strokes in it. It's there to create a perfect seal. Excellent point of using thick glass for a surface plate. Molten glass is poured and gravity forms a very flat surface as it cools.

@frog7118 5 ай бұрын

Didn't have the money for Billet Throttle Bodies. I found a pair of OEM bodies on eBay that were over bored for $100. Cut off all traces of the water cooling and removed all casting flashes. Removed that clunky manifold which connects to small hole below the throttle plate which I thought may be a mistake. Looking at these billet bodies which do not have this, I may be all right. Ended up with OEM bodies that look like billet for a lot less.

@Defiant155 6 ай бұрын

Hopefully we see how to handle the balance tube soon. I have mine torn down similar to yours and am copying along lol

@gtools9137 6 ай бұрын

Get out the "Armstrong Milling Machine" Piece of glass will usually do a a flat surface.

@eckqu 6 ай бұрын

Good job 👍

@TheAussieShed 6 ай бұрын

Thanks Mate.

@bspradley 6 ай бұрын

Another excellent video Trevor. I appreciate the extra time and the detail of the video. I am curious, is it a worry to have the debris falling into the manifold as you grind and whatnot? I am new to this stuff so I do not know.

@TheAussieShed 6 ай бұрын

G'day Mate, yes, the Intake will need to be removed from the engine to perform this process. A thorough clean out is Mandatory after anything like this. Cheers Mate.

@erictorres1365 6 ай бұрын

Excellent work Trevor. Have you heard anything from PE about the motorized throttle body actuators they were designing to install DBW?

@TheAussieShed 6 ай бұрын

G'day Eric, not at this stage, I think I remember something about it being released early this year. Maybe Polar will mention something in the comments. Cheers Mate.

@Defiant155 6 ай бұрын

I’ve actually been chatting back and forth with Polar over the DBW system. Right now, he has said he’s focusing on getting the orders that were placed around the holidays finished up so he can turn his attention fully to the DBW finalization and he’s hoping to have the orders done in the next couple weeks. So hopefully that sticks.

@slapshot69 6 ай бұрын

Also why not knife edge the throttle blades for a touch more flow? Great blend work and scraping. Really a lost art in my eyes. Dad was machine tool guy all his life so I picked up some of these skills. But not like your or his.

@alwright9443 6 ай бұрын

Rounded edges are better for airflow. Sharp edges create more turbulence. Heat is also an issue with sharp edges as they are more prone to weakening and/or cracking after heat cycles. A few great reasons as to why you would not want to knife edge the blades

@slapshot69 6 ай бұрын

Do they not make a large plenum single throttle body for the z? Also why not go drive by wire?

@McBoj 6 ай бұрын

Second the DBW

@TheAussieShed 6 ай бұрын

G'day Mate, this is just the first stage with these units, Drive by Wire is where i'm heading with it, Polar Engineering has it currently in development. Single throttle body plenums are available, but due the the packaging constraints of the Z32 it means sacrificing Inlet runner length to make it fit. Not an issue for high RPM horsepower, but not great for a Street engine. Cheers.

@kimber1958 6 ай бұрын

The longer videos pay more revenue

@TheAussieShed 6 ай бұрын

True, but youtube doesn't seem to push them at all. I guess we'll see. Nice to hear from you Mate. Cheers.

@kimber1958 6 ай бұрын

In my opinion, one hour is not too long

@TheAussieShed 6 ай бұрын

Thanks Kimber. Cheers.

@billsimpson2392 6 ай бұрын

40:28 I use bee's wax Trev. Is that bee's wax or regular candle stuff? Bee's wax is a bit pricey I feel! But I agree, it's a game changer. I even use it on my zip cut blades and flap disks when working with Aluminum. Good shit! 👍👍👍👍🦘🦘

@TheAussieShed 6 ай бұрын

G'day Bill, yes its Bee's Wax, Friggin Game Changer Hey. Cheers Mate.

@billsimpson2392 6 ай бұрын

Bloody great. But got to remember to clean it off well if TIG welding afterwards! hahahaha@@TheAussieShed Ask me how I know! 😊😊👍👍