Zero Turn Tractor Lights Install

Рет қаралды 71,054

7 жыл бұрын

amzn.to/2r1bkSp MicTunings Lights Homepage
amzn.to/2qCmbkU The Size Light Used in this video
amzn.to/2qzL0NM Soldering Station with Heat Gun
amzn.to/2r0Q0fU Heat Shrink Assortment Kit
amzn.to/2rABJ6z Self Stripping Wire Stripper
Zippo Varga's KZfaq Channel
/ zippovarga
In this video, I review and install MicTuning's LED Light Bar. I found this light bar 22" to be the perfect size for my zero turn tractor.
Help support Doublewide6 Repairs LLC by sponsoring his Patreon account
/ doublewide6
Doublewide6 Repairs LLC has a Master’s Degree in industrial technology with a specialization in Manufacturing, due to factors beyond the control of Doublewide6 Repairs LLC and anyone featured in his videos, I cannot guarantee against improper use or unauthorized modifications of this information. Doublewide6 Repairs LLC assumes no liability for property damage or injury incurred as a result of any of the information contained in this video or any of Doublewide6’ Repairs LLC's videos. Use this information at your own risk. Doublewide6 Repairs LLC recommends safe practices when working on equipment, power tools, chemicals, electronics, electrical systems, vehicles, and or with tools seen or implied in this video. Due to factors beyond the control of Doublewide6 Repairs LLC, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Doublewide6 Repairs LLC.

Пікірлер: 49

@doublewide6 6 жыл бұрын

@poemranger 6 жыл бұрын

do u have a link for the "marker" or what ever that was to label the relay?

@joshuarivera7622 6 жыл бұрын

You should wire one of the relay wires to the key switch so it only comes on with key on.

@williamjuraco5180 4 жыл бұрын

One of the best dyi videos I've watched. Good job explaining and showing how it works. God Bless!

@bhinsch25 3 жыл бұрын

Thanks for the video. We cut 8 acres and have to quit when it gets near dark as I’m old and can’t see my mow lines. This looks like just what we need. Thanks again.

@aleblanc3547 7 жыл бұрын

What an invention, those LEDs. Thanks, Bob, it came out great.

@doublewide6 6 жыл бұрын

Yes, the lights are working great I'm getting much more use of them in the fall.

@realmichaelbloomfield 6 жыл бұрын

Thank you for the instructional video. Do you have a wiring schematic for this installation?

@xtremegreen1362 7 жыл бұрын

Another great video from DB6.Thanks!

@doublewide6 6 жыл бұрын

Thanks Man!!

@JoshKilen 6 жыл бұрын

very nice job.

@fdehaven2 7 жыл бұрын

i put led lights on my zero turn and love them!

@doublewide6 6 жыл бұрын

I want to add a single LED to the trim side of the deck, so I can go around landscaping edges and see where the deck is when It is super dark out.

@byronmill 2 жыл бұрын

Hey doublewide6. Has this light bar held up for you or have you had any problems in the last 5 years? Thanks!

@bretts1 5 жыл бұрын

Nice does it draw much power? What would it be like on the ROPS bar? N. Thanks for video the light kit that comes with Simplicity ZTM are no where near that bright!

@KeepinYouUp07 6 жыл бұрын

Great vid, just ordered them for my machine. Please let us know if they stand the test of time. Thanks!

@doublewide6 6 жыл бұрын

amzn.to/2r1bkSp These are the ones I put on they have been working great especially now that it is getting dark at 6PM. The only issue I had was the bolts holding the lights needed to be loctited, so they would not vibrate loose. If it is really dark out it would be nice to have a single small separate LED light on the trim side of the deck. If you trim around trees it is hard to see because the lights are out front.

@ronlong597 4 жыл бұрын

I have a ariens edge 34" with a 12 volt small battery 12 amp will it withstand led lights?

@fendermann1825 4 жыл бұрын

Fixing to get my first zero turn to upgrade from my 36” metro. Any advice would for maintenance would be appreciated. Probably getting an ex mark Lazer Z HP 48 inch. 650 hours

@deanbattaglini8129 4 жыл бұрын

Can you list wich harness and relay to buy?

@davidbaron6647 3 жыл бұрын

do you know the Watts or amps? Looks great

@judahbiblehistoryisourhist5841 3 жыл бұрын

Great job

@Lanninglongarmmowing 7 жыл бұрын

We have a smaller light on our zero turn. It's great to have. It slows traffic down a lot if I'm close to the road.

@doublewide6 6 жыл бұрын

I believe that. Nice.

@bryanmcdermott77 7 жыл бұрын

I gotta do this!

@doublewide6 6 жыл бұрын

You will love it. I just used it last week.

@alejandroarellano4466 4 жыл бұрын

Just got mine but didn't come whit the harness and got mine for $55.58 :(I was hoping to install it today.

@willfhh8956 7 жыл бұрын

I love this channel

@doublewide6 6 жыл бұрын

Cool!!

@joesmith3501 4 жыл бұрын

Nice light

@adanmolina9293 6 жыл бұрын

Does it drain the 🔋 battery when using

@doublewide6 6 жыл бұрын

No there is no problem. I run it when the motor is on. There is also no flickering (an indication the light has constant 12V)

@adanmolina9293 5 жыл бұрын

Any issue with battery going weak due to light bar?

@HexaFox 5 жыл бұрын

This is exactly what I was just wondering myself.

@QQTrick1QQ 5 жыл бұрын

doublewide6 Repairs LLC 1 year ago So far I have had no problems. I have used it about 10 times this year. I will definitely post back if there is a problem.

@HexaFox 5 жыл бұрын

@@QQTrick1QQ Cool thanks for replying.

@QQTrick1QQ 5 жыл бұрын

@@HexaFox Better late than never =-)

@randybeard6040 5 жыл бұрын

Good Price on Lights, better than Walmart's Price-I have a Large One on my Big Red side by side and it will Light Up the World...

@riptide10x60 7 жыл бұрын

That light pulls 120 watts, is that compatible with a lawnmower's electrical system or will it overload?

@doublewide6 6 жыл бұрын

So far I have had no problems. I have used it about 10 times this year. I will definitely post back if there is a problem.

@offgriddlifestyle2544 7 жыл бұрын

you can mow early in the morning. neighbors wont like you . lol happy mowing

@doublewide6 6 жыл бұрын

I'm using a lot more in the fall. Last week I was mowing at 7PM and needed the light for the last 15 minutes.

@robertvice1590 7 жыл бұрын

I USE THIS

@doublewide6 6 жыл бұрын

It works great an extra single led on the trim side of the deck would help.

@TommyZTrains 2 жыл бұрын

So many LED's (ya even "CREE" to), often "flicker" and / or will totally fail. I've soldered all my connections / and ALWAYS use a relay in the circuit, but still (sometimes), they FAIL. Where this remark is going is the WARRANTY !, "even in an Automotive application these fail / and FAIL rather often. One of the first signs is one LED failing (say in the "bar" example / and in my experiences), are a "flickering" / or UN-uniform light after awhile / and then others follow / failure occurs. "So what's the Warranty" ? ... LED's literally just "sip" currant, and are GREAT vrs. incandescent alternatives, but low-grade parts / a 'cheep build' can make all the difference. All the sudden your "SOL", and THEN where's the seller ? ... "just saying". Perhaps THESE are the EXCEPTION !? / GREAT CLIP / really LIKED / THX.