I admire creative ideas, but one needs to understand the market, competition, options available. These don't require buffer, recoil spring, gas tube, gas block, ported barrel.....many cost reductions pocketed by Uintah rather than being passed to consumer......which you can pocket yourself elsewhere. Pick up a side charging upper.....full upper for $250-400 or build from a stripped upper receiver to pocket all the savings outlined for bolt action only option, even run a custom barrel which you can change at whim....and run with an adjustable gas block. Avoid the gas block cost for bolt action only build by ordering a non-ported barrel. Turn block OFF for bolt action; ON for return to semi-auto when deer or coyotes attempt to over run your position.. I run two 16" and 20" 308 Ruger SFARs.....$986 each + tax @ LGS....as straight pull, bolt actions....eliminates action noise and movement 'til I run it, no brass in the air as a position tell, no hunting brass under deer stand or in weeds. Get your cake and eat it too....and save hundreds!!!!
@uintahprecision319013 күн бұрын
We are not competing with compliance options or side chargers etc. Price out a custom barreled Remington 700 based platform and see what that costs....just the action and barrel. Then add a good quality stock, scope base, rings, and optic. You're easily into the 3-5k range...for a nice bolt gun, and it's still just a bolt gun. Then shoot that barrel out and go replace it. More than likely you will have to have a gunsmith do it for you. There is another 500-1000 depending on barrel. With our product, you've got the option to run a semi or a bolt gun, with user changeable barrels...and they shoot lights out. Are there good bolt guns for less than a custom. Yes. For less than what we produce. Yes. And if that is what you're looking for, fantastic. We hope you find the best option for you. We could argue the flip side though. Why would you buy a Q mini fix, when our 300 BLK upper/pistol shoots just as good or better for 1/3-1/2 the cost. Why buy a 4k Wilson Combat 1911 when you could buy a Rock Island? Different strokes for different folks. Maybe we'll catch you with one of our other products down the line! Thank you for the feedback. Keep shooting!
@xMrBlack15 күн бұрын
So is this company defunct or something? The contact info on the website goes nowhere.
@uintahprecision319014 күн бұрын
@xMrBlack we've been experiencing some technical difficulties with our website the past couple of weeks; a cyber attack sending hundreds of fake inquiries, account setup requests, etc as well as a glitch with UPS... but it is all being addressed. We always pick up the phone M-F if needed
@xMrBlack20 күн бұрын
These would be way cooler if they were affordable.
@uintahprecision319018 күн бұрын
Sorry that our product doesn't fit the price point you would like. A common misconception about our uppers is that they are just some compliance accessory and that we should be competing with others in the "cheap" upper market, but that is not our market. Our uppers are essentially a custom barreled action that pins to a lower. If you research how much a custom barreled action sells for, then our uppers are more of a bargain price than most realize.
@imtiazahmad569324 күн бұрын
pless Barrel extenstion image share
@MorrisOutdoors98Ай бұрын
Do yall have a magnum bolt face for the short magnums? Like 300wsm, 6.8 western, etc
@uintahprecision3190Ай бұрын
Not yet, but we are working on releasing short mag options like 7 Saum, 6.5,Saum, etc in the future.
@midnightperfectworldАй бұрын
fantastic
@yongyea41472 ай бұрын
So it's fine to shoot 300 black out through 556???
@NeekoG3 ай бұрын
I’m confused. He says MOA guarantee and the website definitely says sub MOA guarantee
@uintahprecision3190Ай бұрын
This video is relatively old. We have since updated our guarantee from 1 MOA to Sub MOA.
@SweatyWelder683 ай бұрын
Bolt action AR 15 ???get the fuk outta here that is not the same thing as semi aouto firing the round becasue you engaged the locking lugs..what would happen if it was forced nto battery from BCG moving forward inertia ??
@oliverwynn65643 ай бұрын
The bolt doesn’t seem to smooth?
@danickert54593 ай бұрын
I can't understand all of the negative people out there. Let's look at a few things. 1. This was the first 3 rounds that were shot out of this gun. Yes, you probably have guns that will shot a tighter group, but how many rounds did it take you to get to that group and get the barrel broke in? 2. Do you know the history behind this round? Did you know that it was designed originally for an AR15 platform to be used by a special forces group that needed a round to reach out and touch a hostile target out to 1000 yards? Now take that same round in a bolt action with a handload and you have a screamer. It shoots very flat. 3. Yes, a 3 shot group is not what a lot of us accept as a group large enough to determine accuracy, but then there are several experts that use 3 shot groups to start their ladder test and then there are ones that say you need at least 10. I've not shoot a UPS15 in 6 ARC, but I do shoot a UPR10 in 6.5cm. I shoot along side guns that cost 3-5x what it cost me for the UPR and I can shoot as well and many times better then those guns. My next bolt action will be a Uintah. I'm just deciding which one. 6ARC is on the list!
@chrisfisher39003 ай бұрын
That’s a bad bitch
@bobcat93144 ай бұрын
Fantastic idea...must be a wwll German manufacturing concept..
@maikjjb83274 ай бұрын
Can the barrel be changed on all AR10-AR15 ????????????
@TweakRacer5 ай бұрын
For $1250... just buy an entire bolt action freedom seed dispenser.
@tacticalrabbit3085 ай бұрын
To what working pressures are your bolts rated for?
@uintahprecision31905 ай бұрын
Our uppers can be loaded to bolt gun pressures.
@tacticalrabbit3085 ай бұрын
@@uintahprecision3190 I'm trying to develop a cartridge and wondering what pressures I can push it to in an AR-10 platform its currently being call 44-06 parent case is 30-06 expanded to 44cal and cut back to 2.300 inches firing a 300grain bullet seated to 2.600 or 2.700 inches depending on bullet shape.
@Rossski5 ай бұрын
Great tutorial. Is there a recommended service/replacement interval for these parts?
@uintahprecision31905 ай бұрын
It depends on caliber and ammo, but with the updated bolt we started putting out about 2 years ago, spring replacement was mitigated for calibers that were rough on components. If you are shooting factory loads, you're going to go well over 5k rounds before you might ever see an issue. Most of the time, customers buy the maintenance kits to have on hand for "just in case". We would recommend inspecting the bolt at every thousand rounds ,for good practice and habit.
@mattsachs21025 ай бұрын
Do you make a single shot sled for the rounds that are to fit in a mag?
@mariodcreatorgaming82366 ай бұрын
How do I replace the barrel if I have shot it out? Does it use regular bolt gun barrels?
@Enigma_V86 ай бұрын
Any chance of a 350 legend version of this? If anything needed a bolt action conversion.
@YEETUS_DELETUS_6 ай бұрын
What's the compatibility with the A2 adjustable stock and hand guard? I want to make this look like a standard issue m4 😎 kinda like a modern "grandpappys rifle" in .223/.556
@uintahprecision31906 ай бұрын
A2 stock, Yes. A2 Handguard, no. There is no gas block or anything to retain the front portion of the A2 handguard, which would normally use the front sight gas block...but you could use any other free float handguard.
@YEETUS_DELETUS_6 ай бұрын
Thanks for the insight. Quad rail it is!
@conanruisi6 ай бұрын
Please tell me that I can load primers via a mag
@gunnybunni6 ай бұрын
this entire concept is corny as hell
@lorcan23167 ай бұрын
Any chance of a 6mm MAX cartridge for the ar15/bolt gun uppers?
@uintahprecision31907 ай бұрын
We haven't had any requests or custom orders for a 6 MAX yet, but it could be done.
@darrylchristiansen60217 ай бұрын
Baker, would it be beneficial to me to change out my trigger i have now on my AR10 that came originally or go to the new trigger? Old man from LaGrange Tx. Hope you are doing well my friend.
@sneakyninja2737 ай бұрын
Will this work with a Law Tactical Folder? Maybe without the bolt spacer they provide
@uintahprecision31907 ай бұрын
Yes, the Law Tactical is the folder that we would recommend. The extention/spacer is not needed.
@Engb32597 ай бұрын
Rigged video. How did you get the 308 bullet in 556 neck? This is an urban myth. Come on man. You would have to make a special load. Bullet pushed in flush with the neck. Factory ammo will not allow the bolt to close. Thus causing a failure to fire.
@Rossski7 ай бұрын
Does increasing the pull weight also increase the hammer force? In other words, would increasing the pull weight cause it to ignite hard primers more reliably?
@uintahprecision31907 ай бұрын
Tyler's info is correct...
@Rossski7 ай бұрын
Thanks, would adjusting it heavier make the trigger reset more forceful?@@uintahprecision3190
@bobbygray4967 ай бұрын
Will the 223 work with a Giselle SSA-E trigger???
@uintahprecision31907 ай бұрын
Unfortunately, no. Geissele triggers are not compatible, due to their hammer geometry.
@bobbygray4967 ай бұрын
So then if I ordered your product would you send a free quality trigger with the product as I would have to replace the Geissele trigger?@@uintahprecision3190
@Sequoiaoverland477 ай бұрын
Because of the AR15 lower would the complete muzzleloader need a FFL for purchase?
@MichaelWilliams-te5dw7 ай бұрын
So you addressing this must mean a huge amount of people are trying this 🤡🤡🤡🤡🤡🤡🤡
@USAACbrat7 ай бұрын
had a LH action delivered in January '23, ordered in Dec. 22. shooting 1 holegroups sincedelivery. Was shooting 300 BO in a 3000 rd. reloading project when i decided the uppers i had built were not accurate enough for serious reloading work. 2300 rounds in i have a 16" bear Creek heavy barrel shoots into a inch at a 100 yds with a 18 cent 130 grain Speer Varmint Bullet.
@robertadvincula61777 ай бұрын
Can I change the rails on the upper with a regular free-float? I wanted it longer
@USAACbrat7 ай бұрын
missed your add in Firearms news, still loving my-00008 LH 300 BO
@uintahprecision31907 ай бұрын
Happy that you are happy with your Lefty BO! We appreciate your business!
@diane21687 ай бұрын
I'm still loving Uintah 6.5 Grendel upper... I know you've seen my load work ups over on Instagram...
@lonecrapshooter61977 ай бұрын
Did you make this video because of me? Because of all the "experimenting" I do trying to Frankenstein build everything. Or perhaps because of all the ridiculous questions I ask? I'm Tony in Tennessee just curious. LOL Baker, ram-rod my current order on through expedite the process, so to speak. J/K Just keep doing what you do you are greatly appreciated. Kindest Regards, and have a great safe day
@123456789719267 ай бұрын
I know it’s gonna sound dumb, but will Daniel defense rails work?
@BURNaJAE8 ай бұрын
Do it visa versa please!!
@johnny_tard8 ай бұрын
California regulation compliant be like:
@mark27279 ай бұрын
I have a custom build AR-15 complete rifle that cost the same as your upper in 5.56mm Nato. I like the idea of a precision bolt action upper & would like one but, I hardly get the trigger time at the range to justify the purchase ( which chaps my Marine hide to no avail...☹)
@05709659 ай бұрын
Do they make a left handed version?
@uintahprecision31909 ай бұрын
Yes, both our UPR15 and UPR10 lines are available with left handed actions, which are also left side eject.
@VeritasEtAequitas9 ай бұрын
"Know that it isn't going to blow up in your face". From 1 round? Bull. Plenty have on camera.
@artwalker88129 ай бұрын
Very interested
@bjpowell010 ай бұрын
Any chance of a smokeless version in the future?
@Pyrofreek2110 ай бұрын
So would this require an ffl if bought as the full built version?
@v8felon10 ай бұрын
This JP upper is awesome
@austinhuber313110 ай бұрын
Hometown boys
@kurtandrews745011 ай бұрын
I'm sold. I've had a multical stepped lower sitting in a drawer for years wondering what to do with it. Unitah, you wanna help me build something awesome?
@DMS1791 Жыл бұрын
I’m thinking of building a Ballistic Advantage .308 AR, and I want a Uinta Precision upper to go with my semiautomatic upper. How do UPR10 uppers fit on Ballastic Advantage recievers?
@uintahprecision3190 Жыл бұрын
We have not tested the BA lowers for fitment, but they appear to be very similar to the Aero M5 lower, which will fit and function, but have a slightly different radius at the rear, which is not aesthetically pleasing to some, as there is a noticeable gap.