Can I use the Phaetus Rapido 1.0 or 2.0 with the Ender 3 S1 Pro?
@itsazuura4 ай бұрын
"The motOEEEEER'
@AndroidA2586 ай бұрын
worst hotend i ever used, the thermistor placement is so bad, it makes temps innacurate, also it breaks super easily
@freelectron202911 ай бұрын
very frustrating but typical chinese. they have four similar products on there website but fail to explain the differnce or features of each. how are they still this bad at selling stuff. is it a disease? they have the rapido 2 in HF and UHF and then they have the rapido Plus 2 in HF and UHF. only difference i can tell is they have different thermistors. THEY WHY NOT JUST SAY THAT!! WHAY DO YOU NEED TO WRITE PLUS IN THE NAME?? WHY NOT MENTION ITS DIFFERENCE BETWEEN MODELS?? HOW ARE YOU THIS BAD AT SIMPLE STUFF?? why would i trust you to make a complex item if you cant simply inform the public of the features of the thing you are trying to sell them??
@flyingskull Жыл бұрын
On cold changing nozzle the coldside constantly loose position. Only one downside
@francisnitsch-jones5908 Жыл бұрын
well i need this haha
@rafsh1846 Жыл бұрын
Availability in Australia is very limited wish I can test it got one printer using voron dragon and the other rapido plus they are amazing hope I can test this one soon , fan from Sydney Australia.😍😍😍😍🥰🥰🥰
@JulyLuo Жыл бұрын
Super Cool
@woodwaker1 Жыл бұрын
When will the next XG be out?
@Phaetus3D Жыл бұрын
Check the reseller list here: twitter.com/phaetus3D/status/1669273246892707840
@HelgeKeck Жыл бұрын
this hotend is a killer, using it since a while. its a multicolor monster
@mciarlillo1309 Жыл бұрын
Looks great and seems like a simple upgrade going from the original design. Is it only rated to 280C? Been eyeing the Goliath lately.
@leeroyjenkins7915 Жыл бұрын
@@mciarlillo1309 The standard config is rated only for 280°C because the standard version does use a 100k thermistor. This thermistor type temperature readout slowly becomes unreliable above 280°C. If you plug in a PT1000 or PT100, then you can reliable readout till 350°C. This hotend is not physically limited to 280°C, but cheap thermistors are.
@mciarlillo1309 Жыл бұрын
@@leeroyjenkins7915 thank you for taking the time to explain this!
@francisnitsch-jones5908 Жыл бұрын
how does it compare to the uhf?
@SR20VEonW103 ай бұрын
how many mm3/s did you get?
@user-ti3sc2sn7u Жыл бұрын
so cool
@vveremeevv Жыл бұрын
Прикольно
@woodwaker1 Жыл бұрын
Great video. I just ordered one and an APUS from Fabreeko
@unharmonix Жыл бұрын
Why are you talking, in that stupid voice, it sounds like, you emphasize, the wrong parts of sentences, and are trying to sound, like this extruder, is epic. It's not.
@AnasKhan-in3wu Жыл бұрын
want to buy from bangladesh
@Phaetus3D Жыл бұрын
We do not have reseller in Bangladesh. We would suggest you to buy from China. It would be the nearest place from you, and the shipment fee would be around $60. For more information please email to: [email protected], our professional sales team will contact with you.
@fabianmartinez39 Жыл бұрын
It looks cool can't wait to test it out
@codyjepsen2031 Жыл бұрын
This narrator irks me in a way that is difficult to explain.
@PaulPofandt Жыл бұрын
It's the drop in tone at the end of each sentence. I half expect him to start adding echo echo.. echo... effects.
@chouchooou Жыл бұрын
沙发🎉。要是能 500 度就好了,不过 290 足够应付绝大多数材料了。
@gur3n6089 Жыл бұрын
板凳
@danielreborn4707 Жыл бұрын
Please make CAD file for hotend attachement available public.
Bought one of these around 6 months ago. Total waste of time. Huge problems getting filament to feed through. Constant jams. Support was non-existent. Didnt even get a reply to my request
@Phaetus3D Жыл бұрын
Sorry for the circumstance. Could you please leave us your email address? We will check if we got your email and we will reply you soon.
@tomc6002 Жыл бұрын
𝓅𝓇𝑜𝓂𝑜𝓈𝓂 🙂
@tecnobs3d Жыл бұрын
Congratulations from a fan in Sweden.
@Hopeinformer2 жыл бұрын
Congratulations guys!!! 🎉🥳
@Leviathan3DPrinting2 жыл бұрын
Glad to see good things coming fron the recent acquisition of drop effect.
@madorax2512 жыл бұрын
I'm from Indonesia where I can buy this product I'm looking for on Aliexpress no one sells it
@nrd902 жыл бұрын
can i use standard V6 Heater and Thermistor?
@KGV_Studios2 жыл бұрын
🤦♂️ I waited for a notification from KZfaq for this live and never received it thanks KZfaq for making me miss out on winning a hotend 🫠
@Zachary3DPrints2 жыл бұрын
OMG… I just the message about this live stream being live! Nope I see that this stream was 3 hours ago
@onewa7122 жыл бұрын
Dand it, was THIS the video to interact LIVE for a chance to win a hotend? I keep finding new videos from you guys that I missed :( haha
@futuremapper_2 жыл бұрын
Hola
@onewa7122 жыл бұрын
Aww was this the event where ppl needed to participate to get a chance to win a hotend? :(
@KGV_Studios2 жыл бұрын
Fingers crossed 🤞 saw your post on instagram I’ll see you tonight at 7pm 👌
@kealke2 жыл бұрын
Too bad its not a mixer. This will need retracts on color/material change and cannot do gradients, and will suffer from jams more frequently because of the retraction distance needed. Printing certain high temp materials, this may also cause the ptfe tube to offgass or deteriorate quickly. In other words, why isnt this a mixer?
@ricardobehrens89582 жыл бұрын
Oh yes i am Buy it 🥰
@ziqtkd85882 жыл бұрын
can this apply on ender 3 without any new mount
@Phaetus3D2 жыл бұрын
Yep it can, without any new mount ;)
@ziqtkd85882 жыл бұрын
@@Phaetus3D nice...i wish this item ready stock in malaysia
@FilamentFoundry2 жыл бұрын
Imagine dragons lol 😂
@snotode5432 жыл бұрын
Sieht cool aus, ABER Normaler Radiator und ein Pneumatik Y- Stück davor erfüllt denselben Zweck und kostet 2€ Ich verstehe hingegen sehr wohl, dass es viele Anwender gibt, die eine Fabriklösung favorisieren und bereit sind dafür zu bezahlen.
@rocketboyjv54742 жыл бұрын
Dude I thought "huh this song kind of sounds like that one believer song. But there is no way they would use that. Would be funny tho" then i see the credits😂
@Intruder3332 жыл бұрын
Warum gibt es noch keine Videos von den Phaetus Dragon Wassergekühlten WST und WHT hotends? Darf ich wohl mal demnächst in Angriff nehmen.
@nsboost2 жыл бұрын
My question is.. how long does it take for the color change to happen? How detailed can we get with the two filaments?
@Phaetus3D2 жыл бұрын
Depending on the speed of the slicing, it could take 1-3 seconds or so. You can get details by searching some reviewing videos of the TaiChi hotend out there, they can show you so many details!
@TomTheWise_2 жыл бұрын
Did not expect my questions to become an FAQ on your twitter but nicely done, thanks for answering! :D Also really great of you to upload the step files prior to the availability! This ensures available mounting and cooling Mods. Too many other companies are too stubborn to realize how important that is! I will probably make an cooling Duct for myself. On a designing standpoint I already love the fact, that the Heatsink is symmetrical (front and back) and that the Nozzle is completely in the middle of the Heater block - that was super annoying on Volcanos and designing Fan-ducts / Partcoolers for them! Sadly it seems like I have to wait a lot of weeks to buy an TaiChi...
@TomTheWise_2 жыл бұрын
@@Phaetus3D Hey, I spend the last few afternoons and evenings to design an highly integrated Mount and FanDuct. If you want to check it out, It is uploaded on Thingiverse ( thing:5273756 ) I would love to hear feedback! I think it is as good as I can make it with only using the .step files as basis to work around and not having an actual TaiChi Hotend yet. You know... You could provide me with an TaiChi if you want, so I could finish it. ;D
@TomTheWise_2 жыл бұрын
A few questions: - When will it finally be available? - Does it use Standard V6 Nozzles? - Is the heater-block plated Copper or Aluminium? - Will you guys make an Volcano style heater-block option? - How is flow compared to V6 and Volcano? - How well does it perform when using just single material/color? Is it a trade off compared to your other single filament hotends? Because the one-hand-nozzle-change ability by itself is already convincing. Of course I would try dual Filament Prints some time too. :D I can't wait to install one!
@iamskoorb2 жыл бұрын
Release date?
@Phaetus3D2 жыл бұрын
SOOOOOOOON
@Phaetus3D2 жыл бұрын
@@S00rabh Should be end of this month or the start of April ;)
@Hopeinformer2 жыл бұрын
I want to know what slicer did you use to get those supports to pull off so easily and cleanly! Whoa! Definitely not PrusaSlicer
@Phaetus3D2 жыл бұрын
Hey, the slicer we used here was ideamaker, but actually the slicer wouldn't affect the printing results like you said above, but the supporting filaments, which is our own filaments, you can check them out here: www.phaetus.com/aesupport-s-purple/
@senonbfs2a2 жыл бұрын
auch ich würde ein hotend testen oder auch kaufen. bitte meldet euch bei mir. beste Grüße aus Deutschland