TaiChi Hotend by Phaetus

No video

TaiChi Hotend by Phaetus

Рет қаралды 9,150

Күн бұрын

Phaetus TaiChi Two-In-One-Out Hotend
Phaetus, a supplier of core parts for high - end 3D printing equipment
Focus on the upstream market of 3D printing
Supreme Pursuit
►Subscribe to Phaetus: www.youtube.co....
►Shop Phaetus Dragonfly Hotends and more: www.phaetus.co...
►Follow Phaetus:
Official Website: www.phaetus.com/
Official Instagram: / phaetus
Official Twitter: / phaetus3d
Official Facebook: / phaetus3dp
Official LinkedIn: / phaetus-m. .
#Phaetus #TaiChiHotend #3DPrinting #Hephaestus
© 2022 Phaetus Co., Ltd.

Пікірлер: 23

@TomTheWise_ 2 жыл бұрын

Did not expect my questions to become an FAQ on your twitter but nicely done, thanks for answering! :D Also really great of you to upload the step files prior to the availability! This ensures available mounting and cooling Mods. Too many other companies are too stubborn to realize how important that is! I will probably make an cooling Duct for myself. On a designing standpoint I already love the fact, that the Heatsink is symmetrical (front and back) and that the Nozzle is completely in the middle of the Heater block - that was super annoying on Volcanos and designing Fan-ducts / Partcoolers for them! Sadly it seems like I have to wait a lot of weeks to buy an TaiChi...

@Phaetus3D 2 жыл бұрын

Hey Tom, we just forgot to answer you privately, was planning to post that Q&A publicly then answer you! Sorry anyway... Yes, we do think the model files are important for our customers ;) and thank you so much for the appreciation! We'll push the processes as fast as possible to deliver this new hotend to you!

@TomTheWise_ 2 жыл бұрын

@@Phaetus3D Hey, I spend the last few afternoons and evenings to design an highly integrated Mount and FanDuct. If you want to check it out, It is uploaded on Thingiverse ( thing:5273756 ) I would love to hear feedback! I think it is as good as I can make it with only using the .step files as basis to work around and not having an actual TaiChi Hotend yet. You know... You could provide me with an TaiChi if you want, so I could finish it. ;D

@TomTheWise_ 2 жыл бұрын

A few questions: - When will it finally be available? - Does it use Standard V6 Nozzles? - Is the heater-block plated Copper or Aluminium? - Will you guys make an Volcano style heater-block option? - How is flow compared to V6 and Volcano? - How well does it perform when using just single material/color? Is it a trade off compared to your other single filament hotends? Because the one-hand-nozzle-change ability by itself is already convincing. Of course I would try dual Filament Prints some time too. :D I can't wait to install one!

@Mobile_Dom 2 жыл бұрын

it's like you guys read my mind, I have an older, inferior 2-in-1-out hotend, i'd love to test one if you need beta testers

@rocketboyjv5474 2 жыл бұрын

Dude I thought "huh this song kind of sounds like that one believer song. But there is no way they would use that. Would be funny tho" then i see the credits😂

@ricardobehrens8958 2 жыл бұрын

Oh yes i am Buy it 🥰

@nsboost 2 жыл бұрын

My question is.. how long does it take for the color change to happen? How detailed can we get with the two filaments?

@Phaetus3D 2 жыл бұрын

Depending on the speed of the slicing, it could take 1-3 seconds or so. You can get details by searching some reviewing videos of the TaiChi hotend out there, they can show you so many details!

@nrd90 2 жыл бұрын

can i use standard V6 Heater and Thermistor?

@snotode543 2 жыл бұрын

Sieht cool aus, ABER Normaler Radiator und ein Pneumatik Y- Stück davor erfüllt denselben Zweck und kostet 2€ Ich verstehe hingegen sehr wohl, dass es viele Anwender gibt, die eine Fabriklösung favorisieren und bereit sind dafür zu bezahlen.

@Hopeinformer 2 жыл бұрын

I want to know what slicer did you use to get those supports to pull off so easily and cleanly! Whoa! Definitely not PrusaSlicer

@Phaetus3D 2 жыл бұрын

Hey, the slicer we used here was ideamaker, but actually the slicer wouldn't affect the printing results like you said above, but the supporting filaments, which is our own filaments, you can check them out here: www.phaetus.com/aesupport-s-purple/

@Hopeinformer 2 жыл бұрын

@@Phaetus3D oh, that makes more sense. Thank you for all your help

@HomerSmith-xe1et Жыл бұрын

Bought one of these around 6 months ago. Total waste of time. Huge problems getting filament to feed through. Constant jams. Support was non-existent. Didnt even get a reply to my request

@Phaetus3D Жыл бұрын

Sorry for the circumstance. Could you please leave us your email address? We will check if we got your email and we will reply you soon.

@kealke 2 жыл бұрын

Too bad its not a mixer. This will need retracts on color/material change and cannot do gradients, and will suffer from jams more frequently because of the retraction distance needed. Printing certain high temp materials, this may also cause the ptfe tube to offgass or deteriorate quickly. In other words, why isnt this a mixer?