I have the error 05 and yes my warm air is blowing towards a painted wooden wall about 5cm away. I put 4 individual tubes on the 4 outlets and there's a 90 degree bend as soon as the warm air exits. I will have to cut through the wooden wall soon. Hopefully it will fix it

How did I miss this one 😮

How do you show the run time instead of the clock when running ?

Mine gave the 08 error because the fuel froze on a cold night. It tried several times to light , now the screen is dead. Nothing will get it going again

Hi mate..does the long press activated the shut down sequence mode that cools it down or just off? Cheers

The fuel was taking forever to come through the line so I primed it for 5 minutes. Not such a good idea as it went through the heater and poured out the bottom. 🫣 Don't over do the priming

Hi I have just bought one of these and it keeps coming up with e01 error code but it's a brand new battery can anyone help?

Excellent and informative...however what a pallava to get a shelf out. 😂

How does the 4kw HLN AEROLYN compare against the 5kw Autoterm? They are around the same price and the autoterm are obviously very well known.

Joke this is , there’s lots of reasons not mentioned for all the codes E-8 you failed to mention that the bloody pump isn’t working the most obvious yet you failed to mention it , the problem with the pump but kicking in is a multitude of possible reasons

I'm getting some issues with my 3 month old diesel heater. I came home and it was coming up e10. I gave it a prime and changed the hz on it and it seemed to work ok fir like 40 mins but now it's shutting off by itself and is struggling to start up. I just put fuel so it's not that. What's the most common things to check this early? Fuel line? Glow plug?

Do you prime it everytime? How long for?

Thanks!

hi can this style controller (with spanner) be swapped out for the normal universal type?

Thanks for the great video. As another commenter said, great the way you get straight to it and don't make us listen to an unrelated life story.

I’m getting error code E-02 Wired directly to a new 12v deep cycle battery?

Thank you very much. After reading the manual several times I had a vague idea of how it worked but you really helped elucidate some of the details I was missing. Particularly that the timers are countdown timers and not alarm timers. That was super helpful!

Great video, helped me out big time 👍🏻

I'm away to buy the Hcalory HC -A03 5kw stand alone one. I have a Dashoto 5kw in my 11 metre house bus? Heard of them? It's not warm enough at the back of the bus and I also need something portable for my music studio so this seems decent.

What brand you reckons the best Chinese diesel heater?

I just bought and installed this heater but the settings button (to change clock or to change between power and temp mode) doesnt seem to be working. Have you come across this issue? Should i do a reset?

Hi I tried to connect the way you show but no luck. Is there any other ways to connect my remote to the heater. Thanks

I've ordered two of the HLN 2000W heaters and while the service and responsiveness have been great, they have both given me an E1 (load short circuit) error. I'm using the harness they provided, and my power source is a Bluetti 200Max. Did you guys have any issues on your setup with the HLN 2000W? (I'm using the new wireless controller).

How do you turn the alpine mode , on and off ?

How do you turn the alpine mode on and off?

How do you turn the alpine mode on and off ?

How do you turn on and off the alpine mode ?

How do you turn the alpine mode on ?

What is error code E-07 on lavander 5 kw

Does this controller have alpine mode ? If so ,how do you turn it on and off .

hi , great vid , just wondering have u ever heard of the controller settings access fail , ? i cannot get into the settings to adjust fuel/hrz rpm etc , maybe this is a cheap generic controller (comes with heater) that hasn't got that feature > thanks ( mine has a cog symbol not wrench) cheers

Unfortunately, unwatchable with all that garbage inserted. 😢😢

Great Video..I added a lot of alu butyl inside this doors (taking care of the water drains). It made the noise from the tires of the cars next to me much quieter.👍

Can you go through this again without pushing the wrong buttons please

Hi I am thinking of getting one of the Chinese diesel heaters do you know the dimensions of the tank and heater I thank you in advance

Does anyone know how to decrease the fan speed? Its stucked on MAX. please. Thank you

I've had my Hcalory for a year now. Never had it smoke and still runs great. Always run it every month up to tempature on high to keep it clean when it's warm outside. I use the cheap green hose👍. Works fine.

Volume is too low!

how did you get the po4 and 000000 on the screen we fitted a heater to a van and want to slow fuel pump down and increase fan speed

I ordered it 3 months the controller not anything like what you showed looks more copy of lavender

Their wire harness blows it may be long but that’s it The manual terrible schedule small writing small and blurred I’ve got my female fittings then makes wtf

VaclavMarcak 3 minutes ago Hi everyone - mainly Grantsyard and Van Life UK - thanks to them to explain "advance " programming after entering password code "1234". P & t is manual heat control or thermostat control, 1 & 2 is selection between 12V or 24V, H & L is 5000W or 2000W, last number is 1 - 16ml, 2 - 22ml, 8 - 28ml dosing pump. Today I tested my 5KW heater with this "spanner" setting button controller model - all perfect, on P-01 heater 175*C, exhaust 220*C, only two LEDs, on P-05 heater 190*C, exhaust 340*C, four LEDs, on P-10 heater 206*C, exhaust 490*C, six LEDs. A lot of heat out of exhaust - my intention is to make muffler combine with heat exchanger to heat water for additional small hydronic heater and shower in my mobile home as next stage. I hope that software is and will controlling fan speed & fuel dosing to good combustion without "manual" programming fan & fuel ratio as on older controllers. Personally - I'll prefer option for "manual" for case need to do it - going to top on mountains - do not know yet how this controller will behaviour. Good luck everyone, Vas.

We have watched this video several times. Our controller and heater is exactly the same. But we cannot get into the priming mode. Heater turns on and controller works for everything else, except priming. We cannot access HOF mode by doing what the video suggest. Any ideas?

How do you reset the heater control on the remote? Haven’t used mine for a year, it’s primed but heater not kicking in or ‘ticking’ do I guess it needs a reset

why would you want to carry that around? it would soon become a royal pain in the arse having to build it and take it apart every time, i gave up with my BBQ because of the hassle and not to mention the smell in the van whilst travelling even after it was scrubbed to within an inch of it life to clean it

Top man thanks

Perf i ct . 2 minutes without aaaaa oooooo eeee.

Full marks for “Cordon Noir”😊

Looks great. I presume it doesn't cone with the wood pellets?

Does anyone know how to change from Fahrenheit to celcius on the little black remote control?