Those are lovely trims with the black and shiny silver

Don't kick with your shoes man ,,u scratches everything

No. No. No. No. No. No. No. Dont follow this advice

mine popped off, but thanks to this vid i got it back on thanks!

Thanks so much! Short and simple!

Great video thanks sir

What if your wheel doesn't bent in? do you have to get special wheel covers?

Thanks for the simple and straight to the point video! 😊

Thanks for this video!

Hi Mark, a few questions if you don't mind: 1)The interior view of your final install shows the plastic plate on the interior as well as something that looks like a muffler on the vent line (another vent door perhaps?) What is the plate doing for the whole install? 2) Any idea what the CFM on the bathroom fan was? I considered using this style vent cover for a bath fan but was concerned that it wouldn't be strong enough to hold the door open; as opposed to a dryer. 3) Lastly, the maker recommends putting the metal cylinder over the vent line instead of inside it. Were you able to do this with your install?

Might be worth one or two of those solar kits off Amazon depending on where you live.

Thank you, my friend. This really helped.

So, is there a trick to taking them off?

How do u take it off

I made the mistake of removing wallpaper from kitchen walls of a home built in the 80's & it was a mess! Had to call in "professionals"🙄 & a year after, the paint was crackling! So I hired another professional to paint over the wallpaper in the bathroom & it still looks great!!!

I had been waiting to test speed test but you did not!

Thanks for the video my hubcaps came with no instructions. Except little 2 inch pictures on the back of the box. They were a bargain. But I've never paid attention to how a hubcap is constructed.

What is a circulation fan?

Knowing when good enough happens is a handy skill to have….

Mines came with no cut in the wire .so should i cut it ? Because im having a hard time pushing the whole cap inside .when I'm trying to do the last hit to be completely in .i hit it and the opposite side comes back out .

Thank you so much

Excellent victory sir😊

Looks fantastic. Nice work.

Thanks mark!

Thank you sir i use screwdriver nice tips sir

Thank you so much for your helpful video! I had been having this same problem with a very similar fireplace in the house we bought. The fireplace was very dirty when we moved in so I used a shop vac to help clean it, used a wire brush, and used a can of air as well, but was still having issues. Then I tried your brake cleaner trick, and I have a fire going for a couple hours now! Who would of thought of using brake cleaner for a fireplace?!? Amazing! Thanks again!

Mine is leaking from the same exact place & was estimated 590! Thank you so much for posting !!

Thermocouples create current (mA) not voltage... but awesome video nonetheless

Looks better

You messed up when you went ecm over psc... am i right?

I'm having the same exact problem! Liking like crazy, I need to add oil every other day, just replace the cylinder plug thing and still the same maybe this is it! Thanks,

Looks good...just maybe spackle and sand the seams so the moisture (water) from the primer doesn't effect the seams, then finish with wall paint

thanks ,we all the same wheel center caps installing

Good job sir thx

Looks a few thousand $ promoted!

Good job, sir. I have the same car as you. Now I found that it also leaks oil. When I remove the air intake box, I will find that it even leaks to the bottom of the car. Is the oil leaking from the same place as your car? Thank you.

Well I would understand a large bill in the summer but my winter electric bill came to be $1090.00 and we haven't used our AC'S and our heat is heated with natural gas. So idk what the hell is going on!

Thanks for sharing this video. 😊

My pilot kept going out. A quick spray of brake cleaner and BINGO!!!! Thanks

Thank you for including your very cute dog in the video

This worked great for me.. house smelled like carb cleaner for a day, but i was warm.. lol.. Thanks for the help. 👊👊

Thank you! Reminded me of my dad :) I’m trying to do by myself, wish me luck lol

You should always use solvent-based (oil-based) primer, because the water in regular primer can often cause seams to lift. Lucky for him, that the paper was very stable and secure.

I replaced my thermocouple and pilot assembly. The gas logs now light on the first try.. but then they go out after 10 minutes. I am befuddled.

Thank you, Sir! I’ve tried so many things to get my fireplace to stay on over the past year. Countless videos watched. Even a repair guy. Was about to have the second expensive repair guy out here next week until I saw the brake cleaner tip. GENIUS!!! $7 and five minutes. My fire has stayed on for over two hours now. Thank you!

Thank you Mark for taking the time to share this helpful video - the visual steps have helped me and I'm sure many others with their fireplace issues. I'd like to offer one more option that people can consider. I followed your steps using fine sandpaper on the thermocouple first but just like you, it went out after about 30 seconds. My second attempt involved using a spray can degreaser called Amsoil MP, allowing ample time for the volatile gasses to dissipate before trying the pilot once more. Again, it stayed on for only 30 seconds. My last attempt involved using a children's flexible drinking straw and blowing air a couple of inches below where the pilot flame appears. I read that there is an air intake opening at this level which sometimes can fill with dust particles or spider webs. The straw and air did the trick. Using a can of compressed air I'm sure would have the same effect. The fireplace now works properly without incurring any repair costs. Anyway, I offer it in case it can help others.

Window wells are great for letting water into your basement..

I replaced my entire igniter assembly which includes the sparker, pilot and thermopile. Sometimes after the burner lights it runs a minute or so then shuts off. I didnt clean the burner so Im wondering if thats the issue or is my gas valve the issue. I need to try brake clean

How do you get the knob to turn off

Got R16 for my Toyota Corolla 2015, watched the Amazon one and two other videos on KZfaq and they were all freaking lame but your video is amazing, thank you sir!!