I only wanted to run cable from the starter battery to the back of the bed on the Ridgeline. It's only for the DC to DC charging for my power stations. I might use it 4 or 5 times a year. Your way is an overkill. After looking at it for a while, I saw a round pop out plastic by the windshield wiper arm. It leads right to the engine bay. I found my way to charge the power station without doing permanent wiring. Whenever I need to charge the power station. I'll place wires over the cab with magnets. Plug into the power station and clamp on to the battery 😅
@massivebass9623Ай бұрын
😂😂😂😂 That's cute
@OldScorpionАй бұрын
Bro is the best video I found on porting heads on a 2-stroke I'm sure aupplies to the zenoah G260-G320 plum Marine engines I am subscribed and I have your alert on thanks
@viettrungphan97702 ай бұрын
Can you compare Bartolone and ESP ported top end?
@justonjacoby44552 ай бұрын
Is that the new MOD Body?
@tallermotofox27272 ай бұрын
Hello, how can I connect the reversing camera? I can't find any data!
@drrckhamilton2 ай бұрын
I am considering the earthquake SLAPS. Would you say that the sound characteristics are closer to a sealed box or a ported box?
@raulofalltrades50232 ай бұрын
In this passive system im getting from both sound characteristics. Why? Because any song that i play wether is rock, hiphop, RMB, Corridos, cumbia, instrumental, jazz or any other music type it plays damn well. Im very very impressed of how well it sounds from a passive enclosure from an underseat enclosure and from a small box!!!
@momovelez29832 ай бұрын
Can you please tell me the model of the JL tweeters? I need the right size...
@Xplicit_fpv2 ай бұрын
What u got for air space In box? 1 chamber or 2?
@raulofalltrades50232 ай бұрын
For airspace with bracing and speaker displacement it is about 1.75 cubes of internal air space. That’s what JL recomends for my JL Audio 12w3v3-4 sub.
@Xplicit_fpv2 ай бұрын
@raulofalltrades5023 finally finished my downward facing box with two 10-inch ds18 gen XX Subs with two earthquake slaps passive radiators and it bangs.. tuned around 30hz.. it shakes the truck!
@kingdavid20183 ай бұрын
On the black edition I dont think you can disable the ANC without issue. I think speaker wires go from the head unit -> anc -> amplifier
@extremepsych3 ай бұрын
Purty slick pal. Thanks for the idea. Question, does it help with on road driving? I need to find a way to keep mine from spinning so badly at tame off. Anyhow thanks again.
@janeali11743 ай бұрын
Sir i have two stroke cylinder i want to increase its rpm power please help me how i can increase the speed from its ports. Please help me tell me sir
@foardhook4 ай бұрын
So what timing do you suggest? I assume you do use a timing/degree wheel?
@foardhook4 ай бұрын
I did race 1/8 scale nitro for a while and I was porting the Nova rossi Roma25. My son was young at the time and just learning. One of the top drivers asked me to talk to him about taking him out at the end of the main strait. You see each time he went to lap my boy would pin it and pass him on the straight and often take him out. Not very cool. Kids lol and dads who port for fun, not a good mix. I'd say you would be looking for more top end but if you chase that and run out of midrange torque you will end up running flat which is what I suspect the guy I watched before your video did. If I were to start out I'd go for ex 100. It's a good compromise and you can make decent torque at say 10-12,000 rpm. It will give you a solid pull off the bottom to exit corners. With a pipe scavenging trans with 24-25 blow down and an intake at 80. In other words not very different from a stock motor. But if the motor had more than enough cc to pull the bottom I'd port higher, maybe 95 on the Ex. Particularly if its quite over square motor. Let it scream. But port timing is only half of the story and transfer direction and balance is arguably more important. If you want them to make power on top they must flow! I do a lot of flow work. I wish we raced these things here I absolutely get into it. Shit you guys have gear ratios too so you can play with that also, the list of possibilities goes on. I'd shoot for an 18,000 rpm screamer lol. I had the 1/8 scale wheel standing out of corners. I'd want that. Actually I had car this scale years ago with a Zenoha G23 in it and a box muffler and it screamed pretty good. I wasn't porting back then so I never did anything with it but you motors are possibly already running high rpm.
@BashbroRC4 ай бұрын
THOUGHT YOU WASNT GOING ELECTRICAL WHAT HAPPENED 😂
@raulofalltrades50234 ай бұрын
I made it to where it is easy to convert from gas to electric with eazzzzz!
@MrMikebeben2 ай бұрын
What motor mount are you using
@raulofalltrades50232 ай бұрын
@@MrMikebebeni made my own motor mount. Came out so awesome. 3/8 thick aluminum and made all 8 holes to bolt on the motor which has 8 holes. Will show a video more in detail how it holds up and overall the conversion
@justonjacoby44552 ай бұрын
Is that the new MOD BODY
@rmc3104 ай бұрын
Did you upgrade your battery?
@desmondroux72194 ай бұрын
Can you please tell me the make and model of the 3.5" mid driver that you replaced? I know its 2ohm, but i can seem to find one. Thanks, and great video!
@raulofalltrades50234 ай бұрын
Yes sir! I replaced it with a 3.5 midrange neo dymium magnet carbon fiber cone from Skyhighcaraudio.com. The modle is SH-35N
@desmondroux72194 ай бұрын
@@raulofalltrades5023 Thanks bro 👍
@poohtoo335 ай бұрын
Nice!!!
@samanosukeakechi43885 ай бұрын
I'm also wondering if this can pair well with the 12w7ae... right now i'm still using a Rockford fosgate r2-1200x1 powering the 12w7. I hear it's not a good match. Thinking of selling the RF amp, and gettting this Jl audio RD1000/1, since it's more affordable I think right.
@garthharris4375 ай бұрын
Excellent job Raul, much respect for the directions and insightful presentation
@RandoManFPV5 ай бұрын
Bro please help me! How did you remove that plastic/latches on your floor that the rear seat support bars lock into?? I need to remove it to fit my subs in 😮
@justonjacoby44555 ай бұрын
Its going to be nice build im building one 2 man...
@raulofalltrades50235 ай бұрын
I will be posting a video of it fully installed and running… let me tell you it is a beast!!!!
@garagemdomadeira5 ай бұрын
Thanks
@KeepHammering1175 ай бұрын
What are the speakers that you used for tweeter and mid?
@Harvz785 ай бұрын
What exhaust is that?
@gilvasquez13176 ай бұрын
What a beast
@adamblacketter6 ай бұрын
You ever get this metered to see how loud it is?
@raulofalltrades50236 ай бұрын
No i have not metered it. But everyone who has heard it in person are amazed of how good it sounds!
@marksornson26556 ай бұрын
Looks and sounds kool but the speed isn't there.
@raulofalltrades50236 ай бұрын
I had it on a 18 tooth pinion gear at that time. It was runing out of gear really quick. Now i made my five t to an electric conversion using the new hobbywing 12s max4 and the new hobbywing 70125 brushles motor with a 27tooth pinion gear and let me tell you this new set up is way powerfull and faster. I am working on a upcoming video please stay tuned!
@GHOZTPRODUCTIONZ6 ай бұрын
Where did u add the bass knob
@raulofalltrades50236 ай бұрын
The bass knob is at the left side right under the buttons for safety metigation lane assist and 400 watt button location. Good spod to mount bass knob
@adamblacketter7 ай бұрын
Have you metered this? How’s the stock electrical system holding up?
@raulofalltrades50237 ай бұрын
It has been a year now and no problems with power what so ever! Everything 100% the system plays flawless
@shaolin2247 ай бұрын
You might have lost the bottom end but you got plenty on the high
@garyfaulk52507 ай бұрын
Love the sound Bro😊
@GHOZTPRODUCTIONZ7 ай бұрын
Quick question I’m trying to put a whole system in my car components in the front coaxial in the back may be running a five or six channel amp for the center channel as well. Is there anything special I have to do
@intylekt7 ай бұрын
This build is impressive. Also, that beat that was playing 11-12 min mark was absolutely craaazy!!!!
@simonsays30638 ай бұрын
Needs a two speed trans. Very cool though.😊
@shaolin2248 ай бұрын
Is that just a 2wd?
@raulofalltrades50238 ай бұрын
It is a 4x4
@shaolin2248 ай бұрын
@@raulofalltrades5023 cool. I like the 4wd system better because it looks like you can service the clutch easier.
@mikaelaeloise41908 ай бұрын
'promo sm' 💃
@anjelstube099 ай бұрын
I got.the same truck. Bro. That's an awesome set up. I want the same set up how much have you spent for the hole equipment.
@Xplicit_fpv10 ай бұрын
Great vid! Ima about to upgrade the speakers. Where can i get a pinout on the amp for speakers?
@daveroski10 ай бұрын
Where did you ground amp?
@raulofalltrades502310 ай бұрын
I grounded the amp to one of the 15mm bolts that hold down the rear seat
@Xplicit_fpv10 ай бұрын
Thank u for the vid!
@galarciso11 ай бұрын
Is only for the sport version???
@raulofalltrades502311 ай бұрын
All trim levels
@galarciso11 ай бұрын
@raulofalltrades5023 its no the sane in crv 2020 lx
@TacoBellMexicanPizza12311 ай бұрын
I'm looking forward to watching this thank you and yes the Ridgeline is bad ass truck
@ryanfailano635411 ай бұрын
Sounds badass is that just welded conversion I have rovan Baja 5t which is basically the old hpi baja truck
@harleydave231611 ай бұрын
I did something very similar to my B.E. but used a single 10" Skar with a slot ported box tuned to 34 Hz. It sounds great but always want more so I might have to look at the passive radiators. I'd love to hear it and know more of your thoughts on how it sounds.
@CJR-se4dg Жыл бұрын
That was crazy informative ty
@CJR-se4dg Жыл бұрын
Wonder if i could run an isobaric set up sealed sitting diagonal facing forward. Nice set up