Isnt the wall already waterproofed?

😻 "Promosm"

You need to laminate the membrane to the tray like the orange one's y'all are way behind

very sloppy job, especially with caulking

What if the gap is just 1", can you just use Schulter All Set?

at 2:15 the bottom of the drain tray looks flat. If that is the water will not completely drain out and funny things will be growing in the drain tray. The bottom of the drain needs to be V shaped and descending from left/right to the middle. So when the tray is level, and you pour water into the tray, 100% of the water drains out because the bottom of the tray is sloping down from each end of the drain trey to the drain hole in the middle. You can test this by putting the tray over your sink, use shims if necessary to make sure the tray is level, then pour your water. I sent one tray back and have another coming in that has the sloped bottom. We'll see if it passes the "all water must drain when level" test.

you said 1 1/2 inch on every corner now im confused because on the message on the screen you posted 1/2”

Are you still using the Truguard system if so how are you liking it

My curbless shower will be 72” by 48” do you have pieces to fit that size? Planning on linear drain along length of shower.

Sooo, when you tile? You doing custom shower base? Cause you know you gonna need water proof membrane. Thus is a very incomplete "how to"..

HELLO?? Is anyone out there? HOW DO YOU INSTALL THIS THING?!?! The video showing how, using Red Guard, is now gone. I don't want to use all of your other waterproofing products. Can I apply Red Guard directly to this extruded polystyrene foam sloped tray or will it melt?? I know the old video showed how to use it without YOUR other waterproofing products, because that was BEFORE you started offering said products... but you really need to give SOME instruction on proper products to use THAT ARE NOT YOUR PRODUCTS.

So the set I got in this size has a low end piece that is grooved, like where you cut it out to place the linear drain! Where do I find THAT video?

Use Kerdi board to extend the slope with Schluter Kerdi. Maintain the warranty.

Still to small

He's advertising that he's going to install that like the Kerdi it is not true the Kerdi is an entirely better option than that first of all it's a bigger hole so the plumber can go back there and do repairs and the water is diverted away instead of trying to keep the water out it's just diverted away his idea is not going to work correctly and if you have a pump from a plumbing problem well you've got a problem

For a very tiny behind...lol. Good video.

Not impressed by anyone who uses a $10 plastic level - case in point, look at the 2X3 on the right side edge of seat - out of plumb more than an inch.

What about a water test over night to see if it holds water...?

5

so... it's a Kerdi knock-off?

How it holding up?

This guy should trim his sideburns

hi , i did not water proof my shower handle , the tile is already in place , is there still a way for me to water proof this piece? thank you

Hey..what is in the Calking gun..pretty important thing to mention..

If the membrane is supposed to go up the wall 3", whydoes he only put it on 1 of the walls? Why not all 3?

Great video man. This is exactly what I was looking for.

Useless information

Wondering why they are call 'curbless'. The backend is 1 1/2" in thickness so unless the entire shower floor is lowered, the shower tray rises at least 1 1/2" above the adjacent floor and thus will need a curb? BTW I have used Trugard products to build 2 previous custom and large showers with great success. Great products at a good price.

You know that the mortar that you used IS modified right? It doesn't matter it will work just fine

Great video! But please, it's pronounced as 'neesh'.

Fellow GA KZfaqr here interested in a cross-promotional project

Step 24 demo the shower because it has fail .

You have to use full waterproof membrane in Florida

Cough, cough, cough.

Wtf you need tools for make jobs

Dude, they have trowels with rounded corners. Don't "file" your trowel.

What it about pan liner ?

we are the factory only do lineardrains, my mail:[email protected]

Perfect sr

What a ridiculously confusing installation method.

if you put down 1/4" cement board, your presloped tray wont be presloped anymore.

If you have tiles around the shower can you remove it worhout destroying everything or do you have to?

This guy is useless .

Do I need to put a membrane on top of this tray?

I would highly suggest you redo your video as what you are claiming in the video does not match your responses to the negative comments. You claim the rubber pans fail in 7 years and then in your responses you say it’s not the liners but the above them that is the issue. If you want tile guys like myself to be interested in your product, don’t start your sales pitch by attacking us. More information on your actual product and how it works would be helpful.

Why would you ever mention a competitors product when talking about your own. That's just plain stupid. If your product can't stand up by itself it's time to move on.

At 0:09 it looks like you forgot to put the membrane on the floor before putting it on the walls. It's not green. I don't know what that surface it. It looks rust colored. So maybe it's not important to start at the lowest point and work your way up. Right?

Do you install this product with or without modified thinset?

Sheetrock in a shower wall ? Say what ?

what's the glue,caulking made of for bonding to the stainless?