Yes! He is just showing off 😂🤣 Have a great day :)
@reginafordyce21 сағат бұрын
Just bought this exact camera and I have a nive lg velvet so not a cheap phone a few years back and this camera sucks I was going to use it for cylinder inspections but I can clearly see there is absolutely no way this camera is 1080p hd it is so grainy and pixelated that I already know I would have a hard time seeing scoring on the cylinders. With I could post pictures to show you how bad the images are. I can not even see how this could be 720p let alone 1080. This camera is an absolute lie saying its 1080p
@brianvogelsong75422 сағат бұрын
Just ordered me a starter kit along with the 1/16 scale brushless in the blue E-Revo 4 by 4 , can’t wait till it comes in
@RCInsiders18 сағат бұрын
Awesome Brian! Sounds like you're going to be having a blast 💯 I think you are going to love that little beast! Let me know how you like it if you get the chance. Thanks for dropping by & happy bashing my friend!! @RCInsiders
@bottanoog9545Күн бұрын
Great video. what a great service you provide for us...new subscriber here.....QUESTION PLEASE.. My 2005 top was working fine up and down but now stops a little short and i have to muscle the top forward so the pins go in their slots...the left is worse than the right? It had been seating fine before.. I havent done anything yet...PLEAS E ADVISE
@RCInsiders20 сағат бұрын
Hi! The first thing I would check is if the cylinders are loose or any other part that may have come loose. If everything everywhere is in place & tightly secure, I would next check the hydraulic fluid to make sure it is full. Thanks for the s ub & have a great day my friend 😀
@bottanoog954516 сағат бұрын
@@RCInsiders cant thank you enough!!
@RCInsiders7 сағат бұрын
@@bottanoog9545 👍👍
@odgeetv85152 күн бұрын
Cool jump 😎
@RCInsiders2 күн бұрын
Good times 😀
@chad35332 күн бұрын
Very good info I don't have the cool little tool box. Also my on/off switch by motor is differet. But same 75 feet. Vevor I can't find a drain to sewar outside? House was made in 24. Not this 1 either. 1st time I used 1 did it some what successfully thx 2 u. The line went down all the way about 50 feet. Didn't run into any blockage? Few times it started making a noise luke it was running hard. But I pulled line back up no blockage cleaned line while returning back into drum thank u. So now when I flush toilet the floor drain in basement overflows but about half the water as b4. So idk where 2 go. If I use a different tool or fund a sewar line from potty idk. Nevertheless less u helped tremendously. Go.lions. I live in lansing mi.
@RCInsiders2 күн бұрын
I hear your frustration. I've been there! Does the drain overflow only when flushing the toilet? Does it overflow when it rains? In the basement our toilet was installed on the main line cleanout & I had to try to get through there. Thant's why I had a cleanout installed outside. Let me know :) @RCInsiders
@chad3533Күн бұрын
Yes after flushing toilet and especially after it rains. I have a sump pump. But it continues after a big rain? Thx for message go blue.
@greenie432 күн бұрын
🤓👍
@RCInsiders2 күн бұрын
🤘😎😀
@heckinscrub22522 күн бұрын
🙂
@RCInsiders2 күн бұрын
Have a great day :)
@thomasboomer98093 күн бұрын
UHD isn't really 4k.
@RCInsiders2 күн бұрын
Hi, What is it?
@b4sicx3 күн бұрын
Is there anyway to run a pedal for tig on this machine ?
@RCInsiders2 күн бұрын
Hi, I don't believe you can run a pedal on this machine. DO you have this welder?
@kennethmckinney8073 күн бұрын
Lol
@RCInsiders2 күн бұрын
Gotta do what ya' gotta do 🤘😎🤣
@kennethmckinney8073 күн бұрын
I use mine with the sander attachment for tight corners
@RCInsiders2 күн бұрын
Nice! I never go anywhere without this tool :)
@kennethmckinney8072 күн бұрын
@@RCInsiders so your telling me that you take it to church and work ??? And maybe Kroger's. 🤣🤓🤣🤓
@RCInsiders2 күн бұрын
@@kennethmckinney807 I mean...You never know 😜😜😂😂🤣🤣
@kennethmckinney8072 күн бұрын
@@RCInsiders lol
@RCInsidersКүн бұрын
@@kennethmckinney807 🤘
@odgeetv85154 күн бұрын
Wow So much hail 😮
@RCInsiders2 күн бұрын
It get a little sketchy that day ‼️
@odgeetv85154 күн бұрын
You can make it 😮
@RCInsiders2 күн бұрын
The Marksman can handle it 😀 Have a great day :)
@odgeetv85154 күн бұрын
Cool tool 🎉
@RCInsiders3 күн бұрын
For sure 💯 Don't go anywhere without it :)
@Dreamtide1254 күн бұрын
😮😵💫😱😏 hold on, master
@RCInsiders4 күн бұрын
Had to batten down the hatches for this one 😜 Have a great day!!
@marilynmonroe61304 күн бұрын
Summer storm🏖
@RCInsiders4 күн бұрын
This on was a doozy 😨 Have a great day :)
@Dreamtide1256 күн бұрын
Cool 😊
@RCInsiders5 күн бұрын
Thanks 😀
@tonydetailing086 күн бұрын
Hello sir, I have a new batch of polishing machines recently. Would you be interested in helping me test them?
@robertl.46756 күн бұрын
Very helpful review! Thanks for sharing the info and have a great day.
@RCInsiders6 күн бұрын
You're welcome Robert! I love this buffer :) Thanks for dropping by & have a great day :) @RCInsiders
@guilhermelopes93636 күн бұрын
Long term review?
@RCInsiders5 күн бұрын
Hi, I use them just about every weekend & they have held up well. They show very little wear, other than cosmetic from scrapes and dings. I would definitely get them again. What would you be using them for? Thanks for dropping by & have a great day! @RCInsiders
@guilhermelopes93635 күн бұрын
@@RCInsiders thnx, i´m buying them then....using them to work on normal street cars
@RCInsiders5 күн бұрын
@@guilhermelopes9363 Cool. I think you will love them 👍👍
@zaskar977 күн бұрын
Bleach those tires 😅
@RCInsiders5 күн бұрын
That's what they're for 😂🤘🤣
@Hoozythekuzzy8 күн бұрын
I am getting this drone today
@RCInsiders6 күн бұрын
Awesome! We had a great time with this drone :) Congrats on the new drone!! Thanks for dropping by & happy flying my friend! @RCInsiders
@Dreamtide1258 күн бұрын
Rubicon is a steel strong car on oa world ❤
@RCInsiders5 күн бұрын
💯🔥 Love Jeeps!! Have a great day :)
@Dreamtide1258 күн бұрын
😂😂😂😂😂 cool music and action on video
@RCInsiders5 күн бұрын
Rookie driver 🤣
@Dreamtide1258 күн бұрын
Not bed thing, super
@RCInsiders5 күн бұрын
This gel blaster is a blast 😜😂
@Dreamtide1258 күн бұрын
Sausage retro car, gooooooòodddddd 🔝👍👍👍👍👍
@RCInsiders5 күн бұрын
😀 Found it at the museum :)
@Dreamtide1258 күн бұрын
Grandpa 😅😅😅😅😅
@RCInsiders6 күн бұрын
Grandpa would love this train :)
@Dreamtide1258 күн бұрын
Great horizon 😮
@RCInsiders6 күн бұрын
Love the sunrise :)
@Dreamtide1258 күн бұрын
Hold on, my friend 😅😅😅😅😅
@RCInsiders6 күн бұрын
😜😂🤣 These things hurt!! :)
@Dreamtide1258 күн бұрын
Not bed RC car, have a nice day (Bon Jovi) 😊😅😅😅😅😅😅
@RCInsiders6 күн бұрын
Thanks! Have a great day as well 😀
@Dreamtide1258 күн бұрын
Great video, thanks 😊
@RCInsiders7 күн бұрын
Thank you my friend!!
@loraroark33278 күн бұрын
This was played at my son's funeral...he was an avid fisherman...all around water sports...many days on the water...gold to me!
@RCInsiders7 күн бұрын
Hi Lora, So sorry to hear this. He sounds like a great guy & I wish I could of got the chance to meet him. I feel like he would have loved this river as much as I do 🙏 This song is a proper fit for him & this river! Feel free to stop by if you ever want to talk :) Thanks for dropping by & have a great day 😀 @RCInsiders
@odgeetv85159 күн бұрын
Beautiful river 💙
@RCInsiders9 күн бұрын
@@odgeetv8515 Thanks! Nice day today 😀
@Dreamtide1259 күн бұрын
Milwakee is a classic great quality ❤
@RCInsiders8 күн бұрын
For sure! I never go to a job without Milwaukee 💯 Have a great day :) @RCInsiders
@Dreamtide1259 күн бұрын
Full throttle 😮😮😮
@RCInsiders9 күн бұрын
Awe YEAH 😁🔥
@alexanderlaffond57449 күн бұрын
Angle buddy
@RCInsiders9 күн бұрын
Hi Alexander, What do you mean? Have a great day :)
@WalkerCarroll-l2j9 күн бұрын
flipper vibes.
@RCInsiders9 күн бұрын
Have a great day :)
@awbrigham81919 күн бұрын
Most versatile way to show us how to burn not cut the wood you mean. They all have their job but you're doing it wrong. Make the tool do the work don't force it. Same with an impact driver.
@RCInsiders9 күн бұрын
Thanks for the tips 👍 Thanks for dropping by & have a great day :)
@MrBostonBilly9 күн бұрын
I have both the Milwaukee and the Dewalt, and I tell you the Dewalt is far better in every way it's more comfortable to use far less noise has more power and doesn't need a tool to change the blades and yes I am a Milwaukee guy except for this and a couple other tools
@awbrigham81919 күн бұрын
Mine doesn't need a tool just pop the top and spin a bolt a cpl turns
@RCInsiders9 күн бұрын
Hey Billy, I don't need a tool on this model to change blades. The Dewalt one is not bad, but I guess it's a preference thing as I far prefer the Milwaukee. This one is definitely loud, but has never failed me :) Thanks for dropping by & have a great day 😀 @RCInsiders
@mr.365s79 күн бұрын
This is just like the HS175D. Yes I think it's the same
@RCInsiders9 күн бұрын
Hi, I am not familiar with that drone. Do you have one? Do you like it? Thanks for dropping by & have a great day :) @RCInsiders
@kylemeyer59019 күн бұрын
I call it the noise maker cuz that’s what it’s best at
@RCInsiders9 күн бұрын
@@kylemeyer5901 noisy for sure, but won't do a remodel without it 💯
@EricMcCurdy9 күн бұрын
🤦🏼♀️
@RCInsiders9 күн бұрын
You ok there eric?
@tumortime5499 күн бұрын
Whose bright idea was it to cut a board flat on top of a wood floor?
@RCInsiders9 күн бұрын
@tumortime549 lol..it's a remodel. Floor go bye bye . That is now the end of a new wall 😅 Thanks for dropping by and have a great day :)
@tumortime5498 күн бұрын
@@RCInsidersah makes sense. That’s a good looking floor tho from the vid. Shame it couldn’t be saved
@RCInsiders5 күн бұрын
@@tumortime549 The floor was soaked and rotted in many places + the homeowner had tried several projects & ruined a lot of it. We saved some good pieces for future "just in cases" 😀 Happy 4th!
@odgeetv851510 күн бұрын
Awesome car 🚗
@RCInsiders9 күн бұрын
Those Dodge Chargers sure sound good 🔥😁 Have a great day!
@ryanclark132210 күн бұрын
What psi compressor do you use?
@RCInsiders9 күн бұрын
Hi, I have a 150 psi compressor, but I believe this jack will operate fine with 120 psi. I have even used similar jacks with 90 psi. Are you getting one of these jacks? Thanks for dropping by & have a great day :) @RCInsiders
@joehammer885210 күн бұрын
I built a similar heating module but my problem is I used 1/2" irrigation tubing and put a plexiglass cover over the frame. I live in Florida and the tubing is actually melting in spots where the temperature apparently is too hot. What tubing do you use or what tubing can you suggest that will not melt?
@RCInsiders10 күн бұрын
Hey Joe, That's unfortunate. I used to live in Florida as well & know how hot it can get! Here is the tubing I use - amzn.to/2O3HaZs It gets pretty hot here in the summer & I haven't had it melt yet after years of use. How big is the heater you built? Thanks for dropping by & have a great day :) @RCInsiders
@Cityheart22110 күн бұрын
Thank you for not only showing us how well the tool works but how to cut. This will be my first time trying do it yourself projects including heavier gardening.
@RCInsiders10 күн бұрын
Awesome! I know you got this 😀 This mini chainsaw makes the heavier gardening much easier & efficient. Let me know if you have any questions about anything :) Thanks for dropping by & have a great day!! @RCInsiders