@icecol22 - Thank you for your feedback! 🙂

I am glad I could help. I am using this fix since I bought the camera almost 2 years ago. Using the fix it overheated just once after recording for a very long time @ 4K/30, it turned off the screens but it kept recording until the battery was empty. It was very warm that day, over 30° C... but that was the only time that happened to me.

Hello there. Yes, it still works. 🙂

It wasn't my discovery 🙂I found the solution on the website mentioned in the description.

@@TheBestShowman ah alright and then the mystery deepens! I also had to fight with the cam over SD cards and non of the formats working, until I realized the only think that works, is formatting it on the pc to exfat, something that every single Google results told me NOT TO DO, but if I format in the camera the sd card becomes the wrong format 🙄 otherwise the camera working great and specially after the heat hack.

@@Hkarl85 I actually never had problems with the SD cards. I guess I formatted them once when I bought them but I don't remember if I did it in the cam or on my PC 🙂

Depending on your video editing software, you have to create new proxy files. These .lrf files are useless for editing in this case.

I am glad you like this solution. But meanwhile there might also be another good solution from Ulanzi. An adapter with a total of 4 anchor points! www.ulanzi.com/products/metal-expansion-adapter-c014?_pos=6&_sid=512f4b6ce&_ss=r

No, it's not. The camera will shut off anyways when reaching aprox 60° which in normal conditions it never reaches. This file only bypasses the EU regulations but it doesn't touch the native temperature regulation of the cam.

Thank you for your feedback! 🙂

U R welcome 🙂

Good to know this. Thanks for your feedback.

You do not need to worry. The battery never gets that hot. Not hotter then leaving the camera in your car in summer. 🙂

I am glad I could help 🙂

Einfach diesem Link folgen: www.camforpro.com/blog/dji-osmo-action-3-uberhitzung-stoppen/

Hello there. I am surprised your pocket 3 still overheats. After the first firmware update, this crack was not necessary anymore. Did you install the latest firmware? This should fix your problem. Beside of this, try to reboot your Pocket 3. Turn the cam on and hold the record button for 10 seconds. Then restart the camera. If even this does not work, then totally drain your battery until the camera is totally dead and then recharge. One of these methods should work. Good luck!

Hello there. I am surprised your pocket 3 still overheats. After the first firmware update, this crack was not necessary anymore. Did you install the latest firmware? This should fix your problem. Beside of this, try to reboot your Pocket 3. Turn the cam on and hold the record button for 10 seconds. Then restart the camera. If even this does not work, then totally drain your battery until the camera is totally dead and then recharge. One of these methods should work. Good luck!

Try removing the battery and reinserting it after 15 seconds.

@@TheBestShowman Ок. А после этого камера должна что-то написать, спросить? Что-то насчёт обновления прошивки?

@@MishganSP No. Nothing is changed in the firmware. It only works as long as the file remains on the memory card.

Gerne 🙂

It does not remove anything. It just bypasses the limit set by EU regulations. The camera shuts down regularely when reaching a critical temperature like it does in every other country ouside the EU.

@@TheBestShowman well it clearly does something if the limit is 48° and after the fix it works for longer periods. may I ask you at what temperature have you (or anyone else) noticed it turning off after the fix? I'm not attacking you or anything and while I can appreciate the fix you provided I'm just asking if I can expect the battery to overheat and set on fire while being on someone's head XD. my camera is overheating at a day temperature of 18° in the UK while recording at 1080p 60fps, both screens set to shut off after 2 seconds, with no EIS or any other fancy additional setting. I wish the camera wouldn't have this issue and am really hoping your fix works but if it reaches the "overheating" temperatures of 48 degrees in this mild climate, I'm sure as hell worried about taking it to Spain or anywhere else with higher temps. the damn camera shuts off after 8 mins of recording! I have the Action 3 btw with a Samsung EVO Select 128GB UHS-I U3 130MB/s. is the SD type not good for it? thanks for your reply either way

@@yourbadday89 Actually this fix has absolutely nothing to do with the battery overheating. This fix only bypasses the device overheating. It regularely shuts off once reaching approx 60°C. But as I said, this has absolutely nothing to do with the battery. I personally never heard anything about a battery overheating. If it does in your case, I guess something must be wrong with it. By the way, my camera did shut the screen off two or 3 times since I use the fix and kept recording without problems. It never reached a critical temperature... and I live in Germany... The critical temperature where the cam completely shuts off must be somewhere around 70°C. But it never happened to anyone so far I know.

I don't own the Pocket 2 so I don't know. Just try it out. I guess it will work. If it does, I would appreciate your feedback. Good luck 🙂

aliexpress.com/item/1005004870985987.html

Thank you! 🙂

Yes

@@TheBestShowman ok because there is just a new firmware released 2 days ago or so and i didnt want to risk it 😇

@@FreezyChannel Oh! I wasn't aware of that. I only own the Action 3 and there were no updates since I bought it! I think DJI doesn't care about this fix, since it helps, somehow, to sell a few more cams in Europe. But... never know. An update to the new fimware is at your own risk. If you do so, I would appreciate if you would give me a feedback if the fix still works. I am positive it does 🙂

Hello! On the root directory. Same place where your folders are stored.

save it where those folders are.

I actually don't know. Just try it. If it works, just keep an eye on the temperature. The cam should shut off anyways when reaching approx 60°C.

So I did a little test on my DJI OSMO Action 4, I formatted the SD card using the camera and applied the fix. It worked fine so thats that question answered, I tested it by running 4K120FPS of which I noticed there was no longer a little bit of sub text that says "will record up to 9min" that seems to be gone, which is possibly one way of seeing if the fix is applied. I used a digital IR thermometer to scan the device after it had been running at 4K120FPS for 26+ minutes without the screen turning off, in a room with an ambient of 23c. The digital thermometer showed the device hitting temps of 58c in one spot and over 51c in other places, I took the battery out and it was at 53c. Does anyone know what the temperature is of this device in non-EU countries for it to shut off? I'm in the UK for reference. Also, many thanks for posting this video :)

No. As for the fix it doesn't matter.

@@TheBestShowman Thanks, I also found a post on the official DJI forum from one of the admins? devs? someone with authority there that mentioned it would shut off at 70c. Hope this helps someone

Yes, it does.

Since the first firmware update the device doesn't overheat anymore.

Hi! ​@@TheBestShowman do you mean they fixed this issue with the firmware update?

@@RockinPeterPan It seems like they did. My cam doesn't overheat anymore.

Yes, it still works.

@@TheBestShowman THANKS. I have a last question. the command line somehow puts the camera into us mode, is that right? but are we sure that the overheating cut-off works well in the same range as in the US and not too high? This tip is tempting but it's true that I'm afraid of damaging the camera. because the line speaks of heat test this sui yourzi say that the latter goes into mode without protection or other change initially planned by the manufacturer. including on us firmware. this is not a statement. I'm just trying to understand the real change in the crack and what it really does

@@Kesa15 All the line does is bypass the 48°C lock. The camera switches off normally when it gets too hot. There is usually a warning and the screen turns off. But the camera continues to record. I never had the camera get so hot that it shut off completely.

THANKS. Even if you have never noticed it, the camera still has the ability to turn off in the event of maximum bearable heat? sorry for these multiple questions. but I want as much information as possible before use.

@@Kesa15 The camera is programmed so that it switches off automatically when it reaches approx. 60°C. Before this happens, the monitor is switched off first. If the camera still reaches the mentioned 60°, it switches off completely. This is not affected by the command line.

It still works.

You are welcome

a quick update i downloaded the file you shared and it is indeed different im on windows 11 and it wont let me deleted the TXT part of the file ( its simply not in the name to be removed ) im gonna test it right now, im sharing this for the future watcher :)

@@ProfessorBroake In order to see the ending of the file, you need to change your windows settings in the explorer menu bar, under "View/Show/File name extensions". By the way, if you update your firmware, the overheating problem should not be there anymore.

​@@TheBestShowman oh really ? thank you so much for the tip. Your file worked already perfect. i will update my cam as soon as i can. Keep up the great work

@@ProfessorBroake I am glad I could help 🙂

So far I know there is no other solution. It's worth to try if you get the chance.

Where did you look at? I heard there are some shops that ship to USA.

Where did you look at? I heard there are some shops that ship to USA.

It's the mini tripod that comes with the Osmo Pocket 3 Creator Combo.

No sorry I mean the long one. Is that the one that comes with the Action 4 adventure combo? I have the amazing Pocket 3 and planning to move over to the Action 4 (or 5) from the GoPro later this year.

@@Tiiti That's the extension rod that came with the Osmo Action 3 Adventure Combo. I don't own the Action 4 but looking at the pictures it looks like the same extension rod (1,5 m)

Yes indeed. It's a double quick release 🤣 As I said in the video, all you basically need is the adapter plate, but since I want to use the small handle with my mini-tripod, I choosed to attache it to the small charging base instead.

No, it's not. But it fits perfectly.

very well... @@TheBestShowman

I actually searched in quotes your quotes on Amazon and found 3 suppliers from $10-18, this thing is perfect, the DJI base is too big for what it does, this is 1/3 the size.

@@RyanPerrella can you please share the Amazon link?

www.ebay.de/itm/364373374929?mkcid=16&mkevt=1&mkrid=707-127634-2357-0&ssspo=rcuv-48ssd-&sssrc=2047675&ssuid=I4ojorZ8SV6&widget_ver=artemis&media=COPY

Leider besitze ich die Action 4 nicht. 😞 Ich bin sowas von zufrieden mit der Pocket 3 und werde mir auch wohl kaum noch eine weitere Action Camera zulegen! 🙂 Vielleicht machst Du ja ein Vergleichsvideo OA4 & OP3? 🙂

Sorry. I have no idea. The easiest solution is to just try it out 😉

Thanks for your reply! I did try it, it didn't work which is why I wanted to check with you!@@TheBestShowman

@@CharlieInCostaRica. Sorry it doesn't work out for you. I have no idea of how a mac handles files. 😥

@@TheBestShowman no worries :P thank you

Never heard about a "high" heat mode. At least my firmware hasn't this mode.