Hack maintenance. I guess if you are not ocd like me and don’t care about boring the whole more or scraping all the rest of surface around. Jesus man
@peterbarlow891216 күн бұрын
What do you do when the bit spins the blind rivet? Grinder could roughly save you then. Another rivet removing video smartly suggests pin punching out the hardened pull rod before drilling. Hammer and chisel is desperate but ok if you don’t need to save the pieces
@blainetrain657517 күн бұрын
Lol the last resort is the first resort in our shop
@caseliaan17 күн бұрын
Indonesia is the same
@aussiebattler843822 күн бұрын
All I seen bolts not screw dumb ass
@ofeenee26 күн бұрын
The scissors worked like a charm!! Thank you so much for sharing this video. 🙏🙏🙏🙏🙏
@joshuaetukudo1519Ай бұрын
Find something sharp. Etch a line in the stub. Use a flathead. Thank me later.
@elisabethhadley7182Ай бұрын
I love how they take the crap from the filter, and put it down the sink so it clogs up instead! They forgot to unplug it during cleaning so the computer can reset itself! Duh!
@minhdo2631Ай бұрын
Yeah I will need to use Method 5.
@jerriandafou1Ай бұрын
In a perfect world the key breaks flush with the key hole. I the awkward mine just a small part of the key broke and stayed deep in the key hole..
@fredgrave2153Ай бұрын
If a rivet is loose (so it'll just spin when you try to drill it), is the only option to hammer and chisel it? Anybody know any other options that are less likely to damage something?
@kevgh38692 ай бұрын
Who calls them elastic pins anyway! And why wouldn't you hold the end you are working on in the vice instead of having the job sticking out and bouncing around like that!
@saieshaprithipaul42472 ай бұрын
Thank you for uploading this video. It worked like a charm, I used tweezers for a firm grip to pull the key out.
@blainetrain65752 ай бұрын
Will continue using one
@__Man__2 ай бұрын
Type J and N are better and simpler, it is compact, unnaked ground, compatible with Europlug C and also goes deep before having contact. With this dimension, you can have 3 type J and N plugs, instead of 1 type F.
@daspecialist12202 ай бұрын
I wish people would stop making tutorials vids without talking and instead annoying and distracting music. Lol Bain of my life
@mbkolb7252 ай бұрын
Excellent, works like charm
@MukiFPV2 ай бұрын
Song???
@barrykilts45062 ай бұрын
What about dissimilar sizes
@andycast6033 ай бұрын
Look there’s an easier way to do this. Reverse bits is what you need to get. KZfaq on how to use those and you’ll be happy on how easy it is. I broke all the bolts on my manifold in my car because I was given the wrong torque. Well the reverse bits took them out so easy. Look it up.
@misatzu3 ай бұрын
Method 1-3: <insert They're The Same Picture Meme here>
@wowy613 ай бұрын
Thank you so much for this method. I have been working on mobile equipment for years and have often struggled with the removal of outer bearing races. This could have saved me so much time and energy. I have used this method twice in two days, and it still seems counterintuitive, but thanks again
@Alexandriaxxanime4 ай бұрын
What do you do if the plastic handle snaps on the drain dial? Can’t open mine bcos it’s snapped
@grimbaz7744 ай бұрын
I had same problem. Wooden tongs or wooden spoons i used to grip it.
@bowlineobama4 ай бұрын
All of these tools work if you have enough elbow room. That's the problem. We don't enough elbow room down at the car.
@timbosims43974 ай бұрын
I just use an old serpentine belt...just make a choke loop in the appropriate direction on the filter, cinch it up tight then continue to wrap the remaining loop in the same direction until al slack is rolled up the pit screwdriver in loops end and pry or just jerk it til loose then continue to pull while it unrolls....or make a loop of old bycicle chain then stick a Phillips head through both ends and pry
@The_Drippin_Don4 ай бұрын
I was just swapping out old GTX 1050ti in my little brother's PC for a much bigger RTX 2080 recently. It does fits in his case, but there was a harddrive panel in the way. Armed with the knowledge I got from playing PC Building Sim 1&2, I get to work feeling confident. I underestimated the task at hand and I realized that PCBS didn't prepared me for these tiny fuckers, having to removed 4 of them to detaches the panel. Without proper tools and unwilling to use hammer and chisel because over concern about damaging components with the impacts, I spent about 10 hours removing them using flathead screwdriver to lift them as much as I can and pull each out in little pieces with a pair of wire cutting pliers. Was very disappointed that PCBS didn't prepared me to deal with this BS lol
@n4_ku2 ай бұрын
I know the feeling man, you should demand a refund.
@turbo57774 ай бұрын
You obviously never worked in aviation as a mechanic.
@dwylhq8744 ай бұрын
Please elaborate. What is the “right” way to remove/replace rivets in aviation?
@TheMothergoose34594 ай бұрын
Turbulence
@ZecharyK3 ай бұрын
So? He never claimed to.
@nathanielluke20842 ай бұрын
boeing haha
@zalafinari4 ай бұрын
You forgot an option: Thermite
@namnam71244 ай бұрын
Thanks mate. Perfect video.
@normanriley53734 ай бұрын
tucker . don't tell someone else to give up their home and freedom unless ypur willing to do the same! give, give give to a bully some time you meed to put on your big boy pants and be brave.
@francoisloriot26744 ай бұрын
for the last method, have you ever heard about a tool called a drill?
@musicteacha4 ай бұрын
Great video and nice soundtrack. As others also commented, some machines are easily accessable though a back panel, others (miele) open up on the front. Some machines have closed bottom, others are open as in this video, which is conveniant. Some motors have only 2 screws, some 4 (also 2 screws in the back, a little harder to access.) What surprises me however, is that the machine doesn't hang in an error. The AEG I saw not long ago had a motor equipped with a tacho sensor, so the machine knows the speed or lack thereoff. And still it filled up with water, stood still for a long time counting down the minutes...
@peroduanippa5 ай бұрын
I like to weld a nut on it, then I can use a socket.
@Super3006915 ай бұрын
It worked great for me! Thank you!
@baimmasbrow6865 ай бұрын
Bam nya di rebus dengan air..?
@paulwright29065 ай бұрын
Support the job on a block of wood , that bounce is taking away at least 1/2of your force.
@notsohandytim50905 ай бұрын
News flash...filters aren't typically mounted on a work bench. 😯
@ivanduarte336421 күн бұрын
Newsflash… it’s a demonstration dumbass
@avanishbhurke72305 ай бұрын
Thanks a lot man, learned something new today ❤
@rp33675 ай бұрын
I thought it's not a good idea to turn the washing machine upside down because water could leak into the electronics which are on the top side?
@Jeremy_alfa5 ай бұрын
Using these pull through rivets at work to bind a plastic cover to an aluminum base. Pain in the butt when it doesn't go all the way through with the gun and takes forever to try and pull it out or sand down without it being noticeable. Happened again right now and never thought about hammering it out, worked like a charm!
@drakkolebanxn5 ай бұрын
all of those are incorrect
@ZecharyK3 ай бұрын
You go make a video then since you're clearly an expert.
@UnskilledGrappler26 күн бұрын
@@ZecharyKRight? The only thing worse than a bad comment is one that implies a better solution but doesn’t elaborate.
@beebeethreefiveseventhreef32765 ай бұрын
The title should be "Correct and St*p*d Ways to Remove a Rivet"
@prcervi2 ай бұрын
work with what you got ways
@dannalboon5 ай бұрын
That my friend, is a bolt!
@user-cm3gz1qz7d5 ай бұрын
😮
@shaundralawson6 ай бұрын
I will be doing the screwdriver method..So it can be empty..I will be buying the strap wrench..Only because I can’t tighten it up fully by hand..First time changing my oil..Thanks for sharing
@stessistessi21166 ай бұрын
My washing machine works except there is water leaking from the filter. The filter is clean though. What could it be?
@blackglovesareformurder3 ай бұрын
I just saw on another video you might need to replace the filter ? (the rubber bit , *gasket* gets worn)
@eniolamelody64156 ай бұрын
thank you for this, used a nail clipper. i got it out less than a min.
@avinashravi47292 ай бұрын
Man this is genius...I got it out using your technique