@@alansmith6387 The battery I use most often is a 2-cell 2200mAh LiPo.
@FarmRCPilot26 күн бұрын
Great Video.. Thanks for sharing. I have those snow skis I purchased a decade ago and used on my tri gear trainer.. I recently purchased a Carbon Cub and was wondering if I could use them on it.. I was wondering about the tail skid.. You showed me the answer for that.. thx for the tips.. Also, what camera were you using mounted on the wing? Please let me know, Thx FRCP
@Weirdflight26 күн бұрын
Other than offering different colors, the nylon Du-Bro skis have not changed. So they should work fine on your Carbon Cub. The camera is a RunCam2. There are newer versions available now. I put one on each wing to balance the weight.
@FarmRCPilot26 күн бұрын
@@WeirdflightThanks.. I thought that might be the camera. I looked further down your list of videos hoping to find one on your video setup and did. thx and happy flying.
@austinwiggins5933Ай бұрын
Bad ass filming.
@solo.80s3 ай бұрын
I like optima line in kyosho and also the laser line
@alanahgonyou5 ай бұрын
Terry, The question I have for you is ,on the forward gun turret is to make it turn with the steering do you tap into the wire of that servo to make the gun turn with the steering?? Thanks, Keith From U.S.A.
@flyinryanmoto264010 ай бұрын
what motor you have in it? I building one now and soon be ready to cover. Im using a 2208 on 3s. Whats the weight of yours?
@timofabi341311 ай бұрын
Make a video on the 2 terrain twister
@user-qv1st1no5l Жыл бұрын
how tall is the action figures
@209Stretch Жыл бұрын
Very cool.
@Jeeplee_rc Жыл бұрын
Mine won't run 11.1 v?!
@Weirdflight Жыл бұрын
weird
@TrailcamsRCPhotoFlying2000 Жыл бұрын
To my eyes the GoPro had a wider field of vision, but the Mobius footage looked better. Which are you still using ? The new Mobius Msxi 4K looks interesting.
@Weirdflight Жыл бұрын
I don't use either camera anymore. I now do most in-flight video with a RunCam 2 or Insta360 Go2
@TrailcamsRCPhotoFlying2000 Жыл бұрын
@@Weirdflight Thanks for the reply. I will research the RunCam 2
@ethanpeters4832 жыл бұрын
I rode a real one in 69-70
@Jacobrosstech2 жыл бұрын
Any updates?
@Weirdflight2 жыл бұрын
No. I haven't messed with it in a while.
@mojarnugget2 жыл бұрын
Hello @Terry Dunn can you share a link for the rechargable 6V batteries? Thanks!
@kajex1rc3512 жыл бұрын
thanks for the nice reviews; 10 more to go 1k, let's go!!!
@KennethWhiteakaruckusbringa2 жыл бұрын
did you ever figure out where the water was comming from
@Weirdflight2 жыл бұрын
No, I've never really put much effort into tracking it down.
@KennethWhiteakaruckusbringa2 жыл бұрын
@@Weirdflight I wonder if a water pump would work
@eleazarcervantez982 жыл бұрын
Can you please give me a list of other parts you used the transmitter receiver thank you appreciate it
@Carlosrap365052 жыл бұрын
Whats the topspeed of that?
@Packless12 жыл бұрын
...nice work...! 👍 ...next you should buid a sampan in the same scale...!
@garyfaulk52502 жыл бұрын
Where can I get the replacement batteries and the Indicator
@Weirdflight2 жыл бұрын
You're right, 4-cell NiMh packs have become strangely difficult to find. I didn't see anything at my usual hobby outlets. Amazon has a few that should work. I *think* this one would fit: www.amazon.com/Tenergy-Connectors-Rechargeable-Receivers-Airplanes/dp/B003BW0Q6C/ref=sr_1_7?crid=WJ3WEBR72ZBY&keywords=rc+receiver+battery+4.8v&qid=1644454342&sprefix=rc+receiver+battery%2Caps%2C64&sr=8-7 Same story for the VoltWatch2. Maybe you can find one on eBay or something similar.
@zoridor162 жыл бұрын
Nice motorcycle! Please top speed?
@gorrammit2 жыл бұрын
anyone know what size motors are in these for the main screw drives? I've got some twin motor ESC with mix functions but want to know if they'll work for this. Mainly need to know current draw, Thanks
@Holliethedog2 жыл бұрын
Great video! Thanks!
@angelfocanti85442 жыл бұрын
Great Job Terry! But I cant find the documents in "tested", it said:
@Weirdflight2 жыл бұрын
Unfortunately, all of my articles went away when they revamped the site a while back.
@angelfocanti85442 жыл бұрын
@@Weirdflight OK, thank you. Please, I cant see the steering system; is the nozzle canging the jet direcction?
@Weirdflight2 жыл бұрын
@@angelfocanti8544 Yes, the nozzles swivel for steering control.
@soarindronesolutions50252 жыл бұрын
Did u glue ur figures on the boat
@Weirdflight2 жыл бұрын
Yes. With GOOP adhesive.
@dicurvinha2 жыл бұрын
That was awesome. What's the link for the skis? Thank you!
My friend has one built at 18th scale, he is annoyed when I told him he could just buy one😂😂 but jokes aside he built it from scratch. He is currently building an 8th scale kzfaq.info/get/bejne/m6p4jMii3bLDe4k.html
@jsl151850b2 жыл бұрын
I was watching it on my phone. Couldn't keep the horizon level.
@MajorPhartz12 жыл бұрын
That’s cool. Brought back a few memories. I was actually attached to VT-25, Chase Field Texas, 1968/69. We were flying the TF-9J’s (like yours) and the TAF-9J two seaters. We were 5J rather than 7L. Your model looks really accurate. One thing tho’. You didn’t happen to have the spring loaded “blow in doors”, upper empennage behind the cockpit? Those old centrifugal flow J-48 engines needed more air than the intakes could provide so as they accelerated, these doors would open. Anyway, great job!
@delauneyfrancois74112 жыл бұрын
Bel avion, superbement réalisé. Question: quelle est cette cocarde? (quel pays?) Autre question: y avait-il besoin de mettre autant de dièdre dans les ailes? Merci d'avance pour les réponses.
@Weirdflight2 жыл бұрын
The markings are American. I assume the dihedral is necessary because the model has only rudder and elevator controls (no ailerons).
@Andrew-er5cf3 жыл бұрын
Great info! Thanks for the tips!
@TylerRavensak3 жыл бұрын
What’s the top speed?
@Weirdflight3 жыл бұрын
I don't know. Somewhere between "cool" and "wow."
@theleadingedgeaviation3 жыл бұрын
Fantastic video!
@earlyculyer41033 жыл бұрын
How are the instructions? Another builder said the frame was very brittle at the key points so I canceled my order it's too complicated for me if the instructions are not clear I never built a model.
@Weirdflight3 жыл бұрын
This design has been around for a long time. I think the manual, as with most Kyosho products, is good. I did not have any trouble getting it assembled.
@earlyculyer41033 жыл бұрын
@@Weirdflight yeah but you're on methamphetamine lol Noah seriously was that your first build.?
@earlyculyer41033 жыл бұрын
Holy cow!
@elleryray47543 жыл бұрын
There are sailor figures out there if you look hard enough. Just saying. Nice model 👌
@h2osmokey3 жыл бұрын
Will your boat go in REVERSE? How did you hold down the center deck to the hull?
@Weirdflight3 жыл бұрын
No reverse. I'm not sure what you mean by the center deck...but it's all stock methods of retention. The cabin is a friction fit and has pins to align it. The area behind that (with the M-60 mount) is the battery hatch and is held in place with magnets. The rear deck (with single M-2) is screwed in place.
@h2osmokey3 жыл бұрын
@@Weirdflight The rear deck has no magnet attachment and no magnets included!?? Yeah, reverse throttle and the motors turn but the boat receives no reverse thrust. Strange. Do you have any pix of the magnet hold down? Thanks
@rccrawlerextreme3 жыл бұрын
wow very scale boat! Thanks for the info
@kajbyman30063 жыл бұрын
Now this is a cool boat!Excellent work too!Thanks👍
@matthewrosa42953 жыл бұрын
DUDE!-YOU FORGOT LANCE JOHNSON'S SURFBOARD LASHED TO THE CANOPY!
@CARMELOGUARRASI3 жыл бұрын
Nice... look my kyosho inferno: facebook.com/groups/492820368746149/?ref=share
@napoleonsolo53233 жыл бұрын
Well done Terry! That is brilliant!
@ezersiqueira3 жыл бұрын
Hey Teddy. I just bought a neo 3.0 and i just love de change of the alkaline batteries to the NiMh blister. What was the final voltage of the blister comparing to the original 6v alkaline? Say hi to 🇧🇷!!
@Weirdflight3 жыл бұрын
The stock alkaline battery is 6 volts (4x1.5v). The NiMh battery is a 4-cell pack, so the nominal voltage is 4.8. But it's closer to 6 volts when fully charged.
@lelandlewis72073 жыл бұрын
I have 4 of these that I picked up from the local Value Village for $5 or $6 each because they didn't have controllers. I pick up a lot of RCs there cheap because of that issue. I have a giant Jeep I picked up for $10. I was looking at the control board to see if I could wire in a cheap receiver to keep the functionality, but came to the same conclusion that the best way is to just throw the boards into the spare electronics parts pile to strip and go with a pair of ESCs and transmitter/receiver. I am going a lot cheaper, using entry level Chinese parts from Amazon, but since this is a learning project and funds are tight, they will serve the purpose. I was fortunate to have the original batteries, so I am going to rebuild them with upgraded batteries and wire in a charge port so I don't have to remove the battery, useless I want to swap it for a charged battery and keep playing. :-) Of course with a bunch of them, I can just swap vehicles. lol Seeing how well this one worked, I am glad I made the decision to swap everything. Like you, I figure screw motors will be next.
@alanbinks61063 жыл бұрын
It needs a scaled 8'6 Yater Spoon surfboard as stolen from Colonel Kilgore. Great model.
@KennethWhiteakaruckusbringa2 жыл бұрын
Was the surf board stealing part only in the redux version I can't remember
@alanbinks61062 жыл бұрын
@@KennethWhiteakaruckusbringa Yes, it was just in the Redux version. The model is completely accurate to the cinematic release. A really great model.
@KennethWhiteakaruckusbringa2 жыл бұрын
@@alanbinks6106 a sound card with the colonel asking for his board back wound be a nice touch lol
@markscotchford41593 жыл бұрын
Great review and video footage. Have you had the Spur gear strip yet? As it is plastic and not metal.
@waynepryce343 жыл бұрын
Are the sprockets and roller chain plastic or metal?
@Weirdflight3 жыл бұрын
Good question. The sprocket is plastic. The chain is metal.
@waynepryce343 жыл бұрын
@@Weirdflight can the sprocket that is turning the chain be directly connected to the motor or the middle gear is necessary?
@Weirdflight3 жыл бұрын
@@waynepryce34 Sorry, but I don't know.
@porta_patrols3 жыл бұрын
nice!
@brenden9653 жыл бұрын
mine did not work so I had to return it for a new one from PowerUp
@tv-nx7mw3 жыл бұрын
Wow!!We succeeded in 'Power up 3.0' Ask me anything about ' Power up 3.0' We made a success in 'Power up 3.0' kzfaq.info/love/c5cwQg8ikzhAJw5IIxg-Hg