Ryobi FVB03 4V 3aH Battery
3:06
Жыл бұрын
RIDGID R861152 In-Depth Demo
7:31
How To Replace A Hand Truck Wheel
1:39
Пікірлер
@ohplezz
@ohplezz Күн бұрын
Thank you for the instructions. I’ve got a 22 club model and I got the blower motor replaced under warranty at 35k miles in April. Now, 4 months later at 40k miles, the blower motor is fluctuating its speed again in a system that does not have a thermostat set point like the way the GT models do. By chance do you know if these blower motors are just defective? Does anyone know if they have a TSB out for them? Regardless, thank you for the instructions. They are really straightforward and easy to understand.
@thehousemann
@thehousemann 23 сағат бұрын
Sounds like either a voltage issue or the motor is failing which unfortunately is a common issue.
@ClamBow
@ClamBow 8 күн бұрын
None of your things in the video helped. I fixed it my self by thinking smart. I removed Google. And reinstalled it. Then it wanted me to setup google assistant again. After that i can now hear the google again.
@thehousemann
@thehousemann 8 күн бұрын
@@ClamBow good to know.
@ClamBow
@ClamBow 8 күн бұрын
@thehousemann I think for android 13. When the newest Update came out it broke google
@jooniee858
@jooniee858 9 күн бұрын
Great tutorial, thanks! Question from my end. I notice that with yours, when you change the profiles, the 3 lgihts on the side of the mouse change from 1, 2 then 3 depending on profiles. Mine for some reason is keeping on 2 out of 3 lights on and when I change profiles, it doesn't change. Is there a way I can configure this?
@thehousemann
@thehousemann 9 күн бұрын
Go into your light settings page. Should be an option there to change the behavior of the side lights. Mine will cycle to show which profile is being selected and then switch to show which dpi setting I have it on
@micsnz
@micsnz 10 күн бұрын
Where's the other ram slot located? How come there's only one slot?
@thehousemann
@thehousemann 10 күн бұрын
@@micsnz only one slot is upgradable. The other is soldered on.
@JoshuaWestbrook-t3o
@JoshuaWestbrook-t3o 10 күн бұрын
First comment ever: THANK YOU!
@thehousemann
@thehousemann 10 күн бұрын
@@JoshuaWestbrook-t3o You're welcome!
@jettschenker
@jettschenker 11 күн бұрын
Doesn't rapid charging of any battery diminish the overall life of a battery?
@thehousemann
@thehousemann 11 күн бұрын
@@jettschenker not with modern batteries.
@DavidMartinez-yi8kz
@DavidMartinez-yi8kz 12 күн бұрын
If it’s too high. How do we lower it back down?
@thehousemann
@thehousemann 12 күн бұрын
@@DavidMartinez-yi8kz from what I remember. You pull on the circle collar on the inside of the base to release the cord
@XxGoUcHiExX1
@XxGoUcHiExX1 14 күн бұрын
Great video thanks
@thehousemann
@thehousemann 14 күн бұрын
You're welcome
@Attictrash1
@Attictrash1 15 күн бұрын
Every time I say hey google, it opens the Google app instead of the Google assistant, is there a fix for this?
@thehousemann
@thehousemann 15 күн бұрын
@@Attictrash1 You just need to change your language. Make sure it's set to a specific region like English (US) not just English and that should solve the issue
@xaratyniz
@xaratyniz 20 күн бұрын
Great! Off the bat I opened it thanks budd
@thehousemann
@thehousemann 20 күн бұрын
@@xaratyniz you're welcome!
@absdab5674
@absdab5674 21 күн бұрын
still didnt work for me
@thehousemann
@thehousemann 18 күн бұрын
:(
@abo-_-najim5497
@abo-_-najim5497 22 күн бұрын
It didn’t work 😢 ☹️
@thehousemann
@thehousemann 22 күн бұрын
sorry :(
@kimberlyg7323
@kimberlyg7323 23 күн бұрын
Brilliant! This worked fantastically to fixed our sofa! Thank you so much!
@thehousemann
@thehousemann 23 күн бұрын
@@kimberlyg7323 love to hear it!
@ericsimms2727
@ericsimms2727 24 күн бұрын
Thanks for the help..!!! Appreciate it.
@thehousemann
@thehousemann 24 күн бұрын
Glad to be of help!
@elijahbillings4658
@elijahbillings4658 25 күн бұрын
This worked for me. Thank you!!!
@thehousemann
@thehousemann 25 күн бұрын
Awesome! Glad it helped!
@shivanshpandey5018
@shivanshpandey5018 27 күн бұрын
Thanx buddy...it was helpful 😊
@thehousemann
@thehousemann 27 күн бұрын
@@shivanshpandey5018 glad it worked for you
@jaywalk6883
@jaywalk6883 27 күн бұрын
accessing the mic to either turn on or off does have capability to do either, what to do?
@thehousemann
@thehousemann 27 күн бұрын
Check your permissions for the app and check to make sure you have "always allow microphone"
@jaywalk6883
@jaywalk6883 27 күн бұрын
I accessed activate mic according to instructions because the mic showed not working but after the feature to turn on or off shows, it is blank and do not have ability to either turn on or off. What to do?
@thehousemann
@thehousemann 27 күн бұрын
@@jaywalk6883 try uninstalling and re-downloading the Google app
@JaeMjaerisk
@JaeMjaerisk 27 күн бұрын
Worked for me thank you
@thehousemann
@thehousemann 27 күн бұрын
@@JaeMjaerisk glad to hear it!
@mydevice4027
@mydevice4027 29 күн бұрын
shitty software, cant even save double click in onboard memory
@thehousemann
@thehousemann 29 күн бұрын
🤷🏻‍♂️
@SpazTheGamer
@SpazTheGamer 29 күн бұрын
What size string is good?
@thehousemann
@thehousemann 29 күн бұрын
.080
@PeterHuang1113
@PeterHuang1113 Ай бұрын
can you cut horizontally? for example, if I want to cut some bamboo cane to ground?
@thehousemann
@thehousemann Ай бұрын
Yea I've cut plenty horizontally. The head won't turn, but just move your wrist 90 degrees..
@PeterHuang1113
@PeterHuang1113 Ай бұрын
@@thehousemann thanks for the replay!
@juansandoval8737
@juansandoval8737 Ай бұрын
Can I turn on a 5 gallon air compressor
@thehousemann
@thehousemann Ай бұрын
How many Amps is the compressor? That's what the question is. You'll be able to run it, but might be a heavy load if ran for too long
@cartoonnetworksarea.
@cartoonnetworksarea. Ай бұрын
When I long press the home button, it takes me to google how can I avoid hhat
@thehousemann
@thehousemann 27 күн бұрын
Do you mean the Google home page? The Google one page? Or the Google voice pop up?
@thehousemann
@thehousemann 27 күн бұрын
Depending on your phone it could be different. On mine, you'd want to goto settings - gestures - power button hold - and change what you'd like it to do from there.
@cartoonnetworksarea.
@cartoonnetworksarea. 27 күн бұрын
@@thehousemann I use an a24 and it's up to date
@dorianpenaloza
@dorianpenaloza Ай бұрын
I installed one and similar to you video, the mount is not flush to the ceiling. How do you fix the gap between the mounting bracket and the ceiling.
@thehousemann
@thehousemann Ай бұрын
I left the gap and honestly never notice it. You could use some Chaulk to fill in the gap if it really bothers you.
@sj460162
@sj460162 Ай бұрын
Thanks bud I will try it. It works..I love you!!
@thehousemann
@thehousemann Ай бұрын
@@sj460162 hope it works
@RimWulf
@RimWulf Ай бұрын
That didn't help at all
@thehousemann
@thehousemann Ай бұрын
@@RimWulf sorry, it's not guaranteed to work for everyone.
@snutpclan6386
@snutpclan6386 Ай бұрын
tengo ese esmeril, con que batería me recomiendas usarlo ?
@thehousemann
@thehousemann Ай бұрын
Depende cuanto lo vas a usar. Una de 4ah sería un buen balance.
@twilightfreak16
@twilightfreak16 Ай бұрын
Can anybody please tell me if it works on carpets? I have apartment carpets with similar texture. 😢
@thehousemann
@thehousemann Ай бұрын
It should but with a larger needle. But carpet usually isn't a interwoven piece of farbric like this? Even low ply carpet would be really short strands.
@EchoRider515
@EchoRider515 Ай бұрын
🤗 Oh Thank You! I've been trying for weeks to resolve this. Sure wish I'd have seen Your video before the MANY I've watched which were of no use at all. I have zero tech savvy. You, sir, have a new subscriber.
@thehousemann
@thehousemann Ай бұрын
I'm glad to hear that! If I can help someone anywhere along the way then my job is done ❤️
@EchoRider515
@EchoRider515 Ай бұрын
😁👍​@@thehousemann
@tedomalley
@tedomalley Ай бұрын
Absolutely Excellent Tutorial! This morning, I installed the ACC IG Controller, ND Window Controller, RF Roof Controller, and Fuse Relocator mods -- all four took only 32 minutes thanks to these vids. I watched each video and read through the instructions a couple of times and then couldn't believe how fast it went. I wasn't even hurrying. I'm pretty certain I could do all four in 20 minutes or less, next time!
@thehousemann
@thehousemann Ай бұрын
I'm glad to hear and love that my sacrifice made it quick and easy for you. I think between trying to figure it out and getting it all on video this took me almost 4 hours to do 😅
@tedomalley
@tedomalley Ай бұрын
Absolutely Excellent Tutorial! This morning, I installed the ACC IG Controller, ND Window Controller, RF Roof Controller, and Fuse Relocator mods -- all four took only 32 minutes thanks to these vids. I watched each video and read through the instructions a couple of times and then couldn't believe how fast it went. I wasn't even hurrying. I'm pretty certain I could do all four in 20 minutes or less, next time!
@thehousemann
@thehousemann Ай бұрын
Excellent!
@dorianjimenaruto9772
@dorianjimenaruto9772 Ай бұрын
I love you
@thehousemann
@thehousemann Ай бұрын
ILU2❤
@allenfullerton6693
@allenfullerton6693 Ай бұрын
Your video was quick and to the point good job
@thehousemann
@thehousemann Ай бұрын
thank you!
@vidtodd
@vidtodd Ай бұрын
Thanks! It is the easiest strange string installation.
@thehousemann
@thehousemann Ай бұрын
@@vidtodd nice!
@HuntersCyclingAdventures
@HuntersCyclingAdventures Ай бұрын
I wish you could plug it in to charge while the battery is in the fan and running definitely doesn’t last long on high
@thehousemann
@thehousemann Ай бұрын
Yea that would be nice.
@user-bl1sk2ix2k
@user-bl1sk2ix2k Ай бұрын
Thank you!
@thehousemann
@thehousemann Ай бұрын
You're welcome!
@marktwo3160
@marktwo3160 Ай бұрын
I think i would have done a function test before putting it all back together first.
@thehousemann
@thehousemann Ай бұрын
😂 Not a bad idea
@jeanayrtonmichael9742
@jeanayrtonmichael9742 Ай бұрын
Salut, pour remplacer la batterie.....faut il la valise ? Je veux dire est-ce qu'il ne faut pas passer chez le concessionnaire pour réinitialiser les données du tableau de bord ? Merci d'avance pour votre réponse !!!!
@thehousemann
@thehousemann Ай бұрын
Désolé, je ne parle pas français, donc je ne comprends pas bien la question (en utilisant un traducteur). Vous devriez pouvoir changer la batterie sans aucun problème. Toutes les données du véhicule sont stockées sur l'ordinateur de bord. J'ai seulement entendu parler de paramètres réinitialisés si la batterie est déconnectée trop longtemps.
@jeanayrtonmichael9742
@jeanayrtonmichael9742 Ай бұрын
@@thehousemann OK, super, vous avez répondu favorablement à ma question !!!¡ merci à vous !!!!!!
@sarahparsons7925
@sarahparsons7925 Ай бұрын
There is an easier way to get traction in order to remove the blade. There’s a slit under the blade and if you line it up with the slit in the blade rotating part, put a Phillips screwdriver in there, it locks it up and there’s zero rotation. Sorry for the not having the correct names but you can find it if you turn the edger sideways a bit.
@thehousemann
@thehousemann Ай бұрын
Oh damn. You're right! Just checked mine. I'll have to make an updated video for the next time I replace the blade.
@infotechsailor
@infotechsailor Ай бұрын
Flathead screwdriver works better than a Phillips
@jovs17
@jovs17 Ай бұрын
Me now: Ordering felting needle. I hope it will work.
@thehousemann
@thehousemann Ай бұрын
It should!
@Mangled1060
@Mangled1060 Ай бұрын
thank you so much
@thehousemann
@thehousemann Ай бұрын
@@Mangled1060 you're welcome!
@sekritskworl-sekrit_studios
@sekritskworl-sekrit_studios Ай бұрын
Is measurement from front or rear of the unit?
@thehousemann
@thehousemann Ай бұрын
It's from the rear, and doesn't start registering until 5in minimum
@sekritskworl-sekrit_studios
@sekritskworl-sekrit_studios Ай бұрын
@@thehousemann Thank you.
@Troy_Sent_A_Message
@Troy_Sent_A_Message Ай бұрын
Mtd figured out your hack and raised prices :( O well bidenomics at work
@thehousemann
@thehousemann Ай бұрын
"inflation" 🤦🏻‍♂️
@Jdigital345
@Jdigital345 Ай бұрын
I bought this saw, very detailed video with one massive difference to the one that arrived, the harbour bolt on mine was unbelievably over tightened from factory (I am a mechanical engineer of 30 years so knew it was a left handed thread) on trying to undo the bolt with a longer Allan key than the one supplied it suddenly give way causing my shoulder to jar. After a visit to A&E and an MRI scan I was told I had severed 2 of the tendons in my rotator cuff. 😢😢😢😢
@thehousemann
@thehousemann Ай бұрын
Oh lordy that's never good. Sorry that happened to you. Wishing you a speedy recovery.
@bobn2805
@bobn2805 Ай бұрын
Wish I could do this with my 2024 model 😢 Asus decided to solder all of it
@thehousemann
@thehousemann Ай бұрын
Damn did they? Didn't know. I was debating the 24 for the oled. But snagged the 23 for a great price. The 16gb does decent, but i edit all my videos on it so the extra ram has been nice.
@bobn2805
@bobn2805 Ай бұрын
@thehousemann yeah I have 32gb since I have the 4070 version but I wish I could get more. At least it's fast ram
@thehousemann
@thehousemann Ай бұрын
@@bobn2805 from what i was reading, at least with the 23s, was that the system didnt really like having more than 32 gb. you'd essentially bottle neck ourself going anything larger than a matching 16gb stick. Not sure if thats also the case on the 24s, so you might not actually be missing out on much if you already have 32gb
@pizzacat369
@pizzacat369 Ай бұрын
If you have the 2024 model just buy a soldering kit
@thehousemann
@thehousemann Ай бұрын
@@pizzacat369 Yea but how many people are going to be comfortable taking a soddering iron to their new laptop.
@ropestan
@ropestan Ай бұрын
Seems like G502 x can save macros that only press keyboard keys and are not on repeat to the onboard memory. E.g. autoclicker that is set to press MOUSE1 with 50 ms intervals will not work and that type of macro is also flagged as not supported in logitech onboard memory manager program. This kind of ínformation should be readily available at logitech's websites instead of us fucking around with the software to find out.
@thehousemann
@thehousemann Ай бұрын
I agree. With a notice that more than half of the onboard profiles don't work.
@Boburto
@Boburto Ай бұрын
Very clear instructions. Thank you.
@thehousemann
@thehousemann Ай бұрын
You're welcome!
@MozertD
@MozertD Ай бұрын
Mine has only one hole.
@thehousemann
@thehousemann Ай бұрын
🤔 That's strange. Do you have the model number?
@konadayz426
@konadayz426 Ай бұрын
This 8 amp charger only rapid charges the hp batteries that have the two extra terminals. It charges a fully depleted hp 4.0Ah battery in about 35 mins. Which is about 30 mins faster than the fast charger. If you have the grey colored batteries or even the older batteries it won't rapid charge those batteries.
@thehousemann
@thehousemann Ай бұрын
Good to know, thanks for the info