I had great success with a spray of fungicide and let it dry and then a coat of limewash made with 1 part latex paint, 1 part water, 1 part hydrolyzed lime with a tablespoon of neem oil concentrate per gallon and a few of peppermint essential oil (to try and ward off future deer girdling). I think the many formulas work as long as the wound is allowed to breath and whatever is eventually trapped inside the healed area isn’t going to rot.

The receiver shouldn’t be covered, it needs cooling air, also it’s a beautiful beast of a receiver.

Thanks! Great information!

THANK YOU SO MUCH！you solved my problem right before my assignmenr due！your video is really helpful！！

Thanks for making this vid! Just FYI, The blade is available through Harbor Freight if you call their parts dept. The part # is 23677 and includes the bolt, washer and fan and cost a little over $30.00 shipped.

Easy way to know blade rotation is to note which way the bolt turns to loosen. If you turn the bolt left to loosen then the cutting edge should be oriented to the left at the 12 o'clock position. So reverse threaded bolts indicate a clockwise blade rotation, where as standard threading indicates a counter clockwise rotation.

Hi, thank you so much for making this video - I have the Atlas Brushless V80, had been working great for 2-3 years, now, the blade it not spinning, it starts right up, both batteries 100%, self propelled is good, but blade not working/spinning, so I cannot cut the grass, so bummed!!! I've read it may be a bad belt -but the part list does not list a belt? called HF, no luck, has anyone else had this problem? broken/bad belt? if so, any ideas???lastly, the HF guy said it could be part #30, the switch assembly, said it could get stuck/clogged/dirty, may need wd40? any help or advice would be awesome and appreciated. The mower worked fine 2 weeks ago, now, the blade not spinning.... help, please?

A damper does not necessarily have a spring. They slow the movement but some also help lift and those would most likely have a spring.

I bought mine too open box. Spent more money on the battery and charger. Then bought another battery since it takes me about an hour and fifteen minutes to cut my whole property. It switches flawlessly

Thx for this video. Fyi, the blade bolt torque is 28 ft-lb, and is listed in the plastic flap that covers where the bag attaches.

Thanks a lot. Many videos are like: you have a layer and a table, just add join and you are fine. Your video is like: Before you add join make sure they have the same data type. After this go for it ... and it magically worked :)

How long can you run it full power before it runs out of pellets

Thank you very much for this video. I have an older Accentra model 1-90-00674 and have struggled for years cleaning that left flue tube. I could only push that flue tube brush so far in the tube until it would stop and go no further. Can’t believe I had the solution in my garage all the time with my plumber’s auger. Worked like a charm. Thanks again.

Thanks1 great information on power draw. It was very helpful in determining what UPS I needed for my Harman.

Lowe's has them.

What year is your 52i? I’m not the original owner but I found the paperwork and found out that he had purchased and had it installed in 2014. I’ve looked and probed to find the opening to the left side exhaust port but found that it doesn’t exist. Do you have the 52i-TC model? Maybe that’s the difference?

I biught a replacement blade through HF. You have to call them to do it.

So the pump is pushing the water from the hot side and out the cold side?

Add wheel weights and fluid Filled tires. And you'll see a big difference on not spinning and getting stuck.

Thanks for uploading these harman videos! Would love to see more maintenance videos to clean it up for efficiency , thanks again

LIFE SAVER

My savior thank you so much

I have wood stove,exelent chemny, oil furnas,and pel pro 70 modified .,10.000 wat Dana gen plant.no problems here

I'm not a fan of this version. The older versions were way smoother.

Nice video. I was curious why the arrows on the blade and on the blade holder point in opposite directions.

I've been wondering but don't have a meter right now. Thank you this helped my brain today

Can you folks think of any reason not to suck outside air from below? I have a propane inlet in my floor that will be available when I remove the propane heater and install the pellet stove. All the literature I've seen shows the inlet pipe going straight out the back. Since I have a hole in the floor already, I'd like to use it. Thanks for your ideas.

Were in Tennessee and was on the fence between mini split and a pellet stove lol. I have a ecoflow delta pro with a 1800 watt array so powering wouldn't be an issue for power outages and grew up in Vermont with woodstoves and pellet stoves. This is a nice video and understanding for the power consumption. Obviously powering this pellet stove with a small powerstation is super easy but the price of pellets and cleaning compared to the 1 time purchase of the mini split is the only thing getting me. Lol The heat off the pellet stove is AMAZING and the flame is gorgeous and also amount of power the pellet stove uses ( basically my box fan running at 50 watts) is outstanding. All this has still got me on the fence. I guess the mini split just is more enticing for the summer for free cooling lol. What do you think?

Good video thank you

Thank you for the informative video.Thats all the consumable information one needs to go out and buy one.

I know its sold, but I'm curious about the front blade. Is that blade assembly custom fabricated to work with the newer style quick hitch? I didn't know a 430 could hook up to that.

I bought my pellet stove from Lowes for 599. There's a 30% Federal incentives on the stove and everything else used during the construction, includes stove pipes. I bought the stove to save money and have alternative heat source during power outage. My solar battery system can run my stove for roughly 72 hours without sun. With Sun, indefinitely 😊 My pellet stove draws 325 watts during ignition. 65-75 watts after the igniter goes off.

MY stove runs at 300 watts after the ignition which in a good down situation I would disconnect that and start the fire by alcohol gel right now I have for 100 amp hour lead acid batteries that are kept charged by my solar system in the yard which is only 200 amp panels. It will run my stove for four hours I want to go lithium ion and I don’t know what size if I have two lithium ion batteries that have 3500 W hours and my pellet stove require 7000 W hours for a 24 hour period does that mean that those batteries will run my stove for 24 hours? And if I increase my two panels to 600 or 800 watch I’m assuming I will have a better chance at running that pellet stove more than four hours a day in the winter time? I do also have a gas generator so I can fill-in I also have a woodstove to fill-in however I have not been able to determine on any of these KZfaq channels how much battery and solar I need to run the 300 Watt unit continuous? DOES ANYONE KNOW HOW TO CALCULATE THE BATTERY AND THE SOLAR PANELS REQUIRED TO RUN IT IN A GRID DOWN SITUATION😳 ❤️🇺🇸❤️🇺🇸❤️❤️🇺🇸❤️❤️🇺🇸

Do you have a link for blade?? I see one on amazon but I don’t think it will fit my 21 inch atlas mower. Thank u!

Mine does not allow water to flow through. I think the flow meter has to be powered on. No help from Steibel Eltron.

thanks I have 2 of these mowers very helpful

Man, wish I could’ve bought it.

What about the assembly (spool with hearts) for the blade? Where can I find that? The little hearts are off of mine which is causing the blade to rattle.

This video makes me feeling hope again, because I was struggle to join the table for the past few weeks. Thank you for the detail explanation

YES!!! THANK YOU!!! MOSZT HELPFUL VISDEO EVER I LOVE YOU!!!! *aggressive virtual handshake*

Great video I still have 2 that didn't work and never returned. .Super thankful for your time and information. What do you think about the $250 batteries. I just got one first run and it sounds and feels like a higher overall speed

Why would Harbor Freight sell a mower and not sell its blade?? Would make me not wanting to buy the mower.

Outstanding INFO and how-to! Many thanks. These mowers are excellent specially with their new larger battery 80V 4.0 Ah.

Amazing product

How can the original owner buy a new 1990 model in 1985?

BY FAR THE MOST HELPFUL VIDEO ON THE INTERNET FOR JOINING FIELDS! THANK YOU!

Thank you for this!!!!

Thanks I'm doing this right now

You just call the number on the pdf for Harbor Freight and order over the phone. Ive had to order replacement heads for the trimmer and called and ordered it as well. FYI

you can also use pruner's putty - basically its beeswax and some other non-toxic ingredients. works great