I have the same one but mines is white and has the wmt strobe
@IG77020 күн бұрын
Best review video I thought the March time was pulse though.
@MyCountryIsSaudiArabia21527 күн бұрын
The P2R is very common in Kuwait 🇰🇼
@MyCountryIsSaudiArabia21527 күн бұрын
We have these in Saudi Arabia 🇸🇦 Qatar 🇶🇦 and Kuwait 🇰🇼
@maiyo8518Ай бұрын
That’s ear piercing. I want those kind of fire alarms!
@joeycaridi3030Ай бұрын
The tones of the alarm would battle if the Classic was on Filtered DC because the Electromechanical horn tone and the 3K Interrupted tone on the Classic have the same pitch has perceived to the ear, however the tone will produce a beating frequency because of their different programed frequencies as the L-Series on 3K will produce a beating frequency sound with the Classic on its Electromechanical horn and 3K Interrupted tone. This doesn't happen with the L-Series on its Electromechanical horn tone because it's a frequency sweep broadband sound that changes its frequency in a frequency bandwidth at a very fast rate which avoids interference as the tone isn't constant and instead moving in frequency to avoid interference with another tone and this is also just like in FM Radio as it sounds better and less prone to interference than AM Radio
@GabetheSlackerАй бұрын
Will that work with other 2-wire fire alarms or just the EST Genesis?
@joeycaridi3030Ай бұрын
02:28 "Uh oh let's take this fire alarm device to the dentist"
@TheFireAlarmGuy_Ай бұрын
Does it need a relay to work?
@Bouncymarble8532 ай бұрын
How do you put on the bracket?
@coochieinspector21252 ай бұрын
i got everything setup correctly but the speaker terminals aren't outputting anything at all. used different speakers, swapped the wiring on the speaker terminals and yet nothing. I bought another of these boards thinking it was defective and turns out both are giving the same issues; however, sound is coming out from the headphone jack. Pls help!!
@coochieinspector2125Ай бұрын
confirmed that this does not work with the board alone. you will need to buy a separate amp
@lukep43392 ай бұрын
disapointingly quiet..
@michaelgrahamwongacutemadness2 ай бұрын
the arsenal mall used to have these on rectangle plates I’m guessing originally they were space age fire alarms like Marshalls still has though probably disconnected since newer alarms replaced them
@Txdcblues2 ай бұрын
I got an mp3 like this with 9 triggers and “lamp” terminals which could be used standalone for your NAC. I’m making a panel using just that without anything needing programming
@TxdcbluesАй бұрын
Thanks to your video and inspiration from GeauxPJ I’ve come a long way in building my panel! Can’t wait for it to be done
@The-creator-of-good-videos-152 ай бұрын
Were the extra stickers put on by you or did the company that ripped off the Spectralert put them on? I just want to know. The stickers with “Fake”, “Stolen”, U m m m Is this even legal” and another “Stolen”. I just want to know.
@coops80392 ай бұрын
is it addressable
@Trout-yz5bk2 ай бұрын
Dissasble wheelock AS
@michaelgrahamwongacutemadness3 ай бұрын
maybe something like this would be approved in a small building
@Aaronproductions3 ай бұрын
Unfortunately not since it’s not a supervised circuit
@FireSystem453 ай бұрын
Will this work on the Ms 4?
@Aaronproductions3 ай бұрын
Yes. Use the alarm relay, you can also do a trouble and supervisory message with their respective relays
@Aaronproductions3 ай бұрын
www.aaronproductions.net/documents
@FireSystem453 ай бұрын
@@Aaronproductions Can I hook up an alarm relay connection and a supervisory relay connection to one speaker? For a multipurpose speaker
@Aaronproductions3 ай бұрын
@@FireSystem45 Connect each relay to its own input on the mp3 player and each relay will trigger a different message, over the same speaker output.
@FireSystem453 ай бұрын
Thanks
@nolafrankenfield103 ай бұрын
Do you know of any way I can safely muffle / reduce the volume without completely disabling the unit in my apartment? Excessively loud!
@Comens19974 ай бұрын
*XMAS* Alert
@Comens19974 ай бұрын
Can i have?
@maiyo85184 ай бұрын
Wheelock AS next
@PeanutVR190164 ай бұрын
The way bro smashed it
@SWAFanPilot4 ай бұрын
If I connect a wired phone to the speaker output terminals, would it broadcast to the speakers as long as audio isn't playing? I have an old Autocall-Grinnell MCM-500 module that would be neat to hook up.
@SWAFanPilot4 ай бұрын
Is there a way to decrease piezo volume? The piezo on my ES-50X makes my ears bleed
@Aaronproductions4 ай бұрын
Put tape on it, of course only do this on your own panel
@SWAFanPilot4 ай бұрын
@@Aaronproductions I put 10 layers on top of the case, then took the front display off AND 10 layers directly on it. This thing is insane. I'll probably just disconnect it.
@TheSimplex49034 ай бұрын
Will you ever be back?
@MIKEY37385 ай бұрын
I also have an old Edwards system still in my home, probably dating back to the 70s. A bit different than this one, don’t know too much about it. Moved here in the 90s, and it’s kind of always been there, does buzz a bit since it’s old and probably outdated. Would love more info on it
@Kbk5425 ай бұрын
Can you hook up multiple speaker strobes?
@kyleviolette52585 ай бұрын
Yes
@ResetTheFireAlarm5 ай бұрын
Can you use this without a panel?
@Aaronproductions5 ай бұрын
Yes, just use a relay on your horn strobe circuit
@ResetTheFireAlarm3 ай бұрын
Whats a relay and how do I use it
@Aaronproductions3 ай бұрын
@@ResetTheFireAlarm There are 4 relays on this board, I suggest watching videos on relays to figure out how they work.
@ResetTheFireAlarm3 ай бұрын
@@AaronproductionsOk thanks
@Davesand20036 ай бұрын
You good?
@Aaronproductions6 ай бұрын
This channel is defunct to lack of time & interest. It’s much harder to find the time now compared to when I was in middle/high school, and I’m focusing more on my audiovisual hobbies, as that is what I do for work. I am still active pretty consistently on my instagram @aargreco though!
@Davesand20036 ай бұрын
@@Aaronproductions oh okay 👍 I didn't know that.
@maiyo85187 ай бұрын
Classic UMMT
@CoolSimasGuy7 ай бұрын
Coming back to this video, these will work with addressable panels, at least on the MS-9200UD. You will need a monitor module for each channel on the relay board. So that’s a total of 4 monitor modules supervising each triggerable channel.
@Aaronproductions6 ай бұрын
For sure! Any contact closure sensing device will work with this since it’s a relay. Addressable panels will offer more flexibility on what the input controls too!
@WhelenWPS30007 ай бұрын
So on Coding can you set the power up and do that signal and then it will do that signal or does it require a panel?
@BenjaminFederico17 ай бұрын
I bought one of these, it just included the panel, I was wondering if anyone has scans for the manual, and what type of diode it uses, as it includes neither of those, and also what types of devices hook up to it. when plugged in it makes a noise and the test button works, but I think I need devices for it and the diodes.
@rfbalagam79508 ай бұрын
I indeed have a question. When you reset the panel when there is no alarm, does the LED on the module flash, or it doesn't unless a actual alarm? I was told that it does not light up on the LED when reset if no alarming because these are designed to monitored the alarms.
@mrmaddocs687528 ай бұрын
How do I link a Fire Lite MS-5UD to a Vista 20SE?
@samsteimel45069 ай бұрын
if anyone can help me do this on my ms5ud i will pay you $10
@HawkeyeAlarms9 ай бұрын
Is this your house or your parent's house?
@realethanangell10 ай бұрын
4:49 This is a U-MHST-S17s-W. The one before it is a U-MMT-MCS.
@Tuhueleamierda199110 ай бұрын
when you gonna update the intro to 16:9
@DelCampoProductions.10 ай бұрын
Cool but you should wear socks at least….
@FIREalarmGuy202311 ай бұрын
0:44 uh, what the f***. Got me dying
@AndrewIsAwesome88211 ай бұрын
Don't break your fire alarms.
@FreeNeato4Me11 ай бұрын
GUESS WHAT!? I GOT PERMISSION FROM MY PRINCIPAL TO PULL THE FIRE ALARM FOR A DRILL YESTERDAY! they had the spectralert, and some places, they had an l series in red, strobe only