I know this is a 2 year old video... But were you using a fabric style filter? Those are too restricted if you have a trans brake. You need the Allison style screen filter. It was hard to see but it looked like the fabric style one.
@KwahuHopi3 күн бұрын
Good content.
@BulliKid3 күн бұрын
Got some Chinese rods and pistons. The wrist pins won’t go into the small bore of the rod. Any tips?
@RobbyVsGarage3 күн бұрын
Press fit. Take them to a machine shop
@BulliKid3 күн бұрын
@@RobbyVsGarage it should be a floating style. It has a bushing and it’s for a Honda civic 2007.
@RobbyVsGarage3 күн бұрын
@BulliKid don’t know what to tell you then. Take them to a machine shop so they can fix it.
@muttbone014 күн бұрын
Man, if only I knew a builder that could build me the dream truck I had. Black '92 S-10, bench seat, 4.3, mint condition, kinda like the Sonoma GT which was basically a Syclone without the turbo an 2wd. Only add back the turbo an convert to 6-speed.....a man can dream.
@larryw7610 күн бұрын
Had a 91 just like it, blew up the 4 banger and put a 327 out of a dump truck and a glide. It ruled the Dallas streets in the 90s. Ok not ruled but you know.
@ROYALPRIX21 күн бұрын
Psh, Mavericks are cool as hell.
@Wingnut707822 күн бұрын
Do you ever miss the simplicity of the blow through carb or is fuel injection that much better I'm just a weekend warrior
@RobbyVsGarage21 күн бұрын
Yes I do
@martinlucas488223 күн бұрын
You know they make the same pump that is made to weld on to the radiator?
@RichardHenry-ye5lwАй бұрын
Bought one new it didn't have near that paint on it.
@andrewbrown5808Ай бұрын
What radiator did you use and did it keep it cool in traffic?
@younggunsDmanАй бұрын
When you end up taking the rods to the machine shop what was their thoughts on them?
@RobbyVsGarageАй бұрын
They are typical overseas rods like scat and other brands. A little on the heavy end
@sampletaster5093Ай бұрын
The coverage note was a good tip. I will buy more.
@samatics4Ай бұрын
What trans?
@vitaliynovoseltsev9280Ай бұрын
What paint was used for the wall?
@RobbyVsGarageАй бұрын
I can’t remember what the color was. Peppercorn maybe
@lexustech48Ай бұрын
Earned a sub froma fellow Arizonan. Maybe someday my 73 Nova gets running lol
@BigFun4LifeАй бұрын
What tires are you currently running on the rear?
@RobbyVsGarageАй бұрын
28x10 Hoosier
@BigFun4LifeАй бұрын
@@RobbyVsGarage do you have any handling problems with radials up front and your bias slicks on the back?Sounds like it works but I always here mixed thoughts on it and wanted your feedback..Thanks
@RobbyVsGarageАй бұрын
@BigFun4Life I don’t drive into the street enough to worry about it
@nickjonesrcАй бұрын
What size are the tires and rims?
@bryantdodd6636Ай бұрын
5 minute mark just the money in the cars let alone travel and all the equipment they hauled 25 to 30 plus grand per car plus all the sweet and beers 🍻 put in them lol crazy how much money them guys from all teams put in them just to destroy them in 10 to 20 min hats off to you all
@LoeJukan248Ай бұрын
love this content keep up the good work! will you do more derby content this year?
@warrenvinansky4771Ай бұрын
Like your truck , keep it , when truck were trucks , bei g military is special
@warrenvinansky4771Ай бұрын
I have a 1984 Chevy m1008 in maine ,has 6" suspension with a 68 rebuilt 427 big block zero rust was painted metallic silver , had for 15 years Detroit lockers in rear , get lots of notes on truck asking if for sale, I keep a Chevy truck cover on it alot , withstands downpours ,, military 5/4 chevys are so heavy duty compaired to civilian square body chevys. Frames wider, huge brackets for rear shocks instead of bolted to hole in frame like civilian ones
@datboired8322 ай бұрын
What color grey is that on the walls? Looks great!
@JustinSmith-df3tv2 ай бұрын
Heyy man Ik it’s been a while since u dropped this video but I want you to know that you have helped me understand tremendously on the journey to my first build for a high HorsePower car I really appreciate your help 💯✅!!
@Fox712K2 ай бұрын
Saw you at LS Fest this weekend, are you Las Vegas based? If so do you go to the bracket races?
@RobbyVsGarage2 ай бұрын
Wasn’t me. I didn’t go this year.
@imagoflyfishing99932 ай бұрын
Hello sir i just got a maverick 1973!! Is the gears interchangeable from 8” to 9”? Im having problems as it just refers to 9” all the time. Same internals just smaller casing? If you know?
@RobbyVsGarage2 ай бұрын
They are not interchangeable
@imagoflyfishing99932 ай бұрын
@@RobbyVsGarage thanks heaps; im going to mini spool the 8” for now then & swap it all out later for an 8.8 or 9” then cheers!!!
@keithowens96642 ай бұрын
Just build a 351 Cleveland Stroker and put in it that way you're not building a AMC
Thanks for taking the time to make this video. I have a 88s10. Can you tell me.more about your engine? What compression are you running in order to do this set up? Thanks
@Dyl_Cam3 ай бұрын
Swear I'm never ever buying an expensive turbo even if I have the money. That's an extra grand or two to go to something else. eBay/China turbos for life
@jimhebert91983 ай бұрын
Just put a Cleveland in it way better
@etornusgaming97523 ай бұрын
11:50 Thank me later
@builditraceit5043 ай бұрын
I'm thinking it's time for nikky Bobby long travel front end for the s10
@RobbyVsGarage3 ай бұрын
I will take donations
@lylegoodluck3 ай бұрын
You think the dimples help? If mellings thought so. They would have shipped it like that..
@madilyntimothy11453 ай бұрын
"Promo SM"
@tuffguy4283 ай бұрын
Annoying music, doesn't contribute anything.
@RobbyVsGarage3 ай бұрын
Matches your comment
@aaronk42413 ай бұрын
U and db garage should get together get that man’s blazer turbo bring more people to your channel and his
@BigFun4Life3 ай бұрын
S10 Coming back together nicely man..Can’t wait to see it hit the strip…Thanks for sharing..
@montecarlo6.0turbo3 ай бұрын
What alt bracket is that on s10 can I get a part number
@RobbyVsGarage3 ай бұрын
amzn.to/4a9RAOm
@BlackCoffin883 ай бұрын
T6 frame turbos demand respect too, so that’s a benefit along to the sound of a phat exhaust 😂 don’t rush it just for LS fest if it means cutting corners. You’ll get there eventually!!
@allencobbs40473 ай бұрын
Nice to see the progress keep the videos coming really interested in how you do that rear end
@2000S10V63 ай бұрын
You got a lot going on. Hope you make it to lsfest.
@jayinmi37063 ай бұрын
I like the 15" front wheels way better than the 17's you had before. Goes much better with the rears. I'd be down to run them on mine, but with the front brake setup I have, I need 16's for clearance. Nice progress. Can't wait to see those huge tires under Dino's truck!
@user-tl6xf2nl6c3 ай бұрын
What size cam?
@RobbyVsGarage3 ай бұрын
Can’t remember the exact specs but nothing wild. It’s a “torque cam” from melling
@Bigkillaward3 ай бұрын
Dude some of these cars are big big money builds
@RobbyVsGarage3 ай бұрын
These cars were $20k+
@zekejennings58423 ай бұрын
What headers?
@RobbyVsGarage3 ай бұрын
eBay turbo headers
@zekejennings58423 ай бұрын
@@RobbyVsGarage do they clean the stock steering shaft?
@zekejennings58423 ай бұрын
Clear*
@RobbyVsGarage3 ай бұрын
@@zekejennings5842 no they don’t.
@RobbyVsGarage3 ай бұрын
@@zekejennings5842 my setup isn’t stock but I have a video on it a ways back
@Drgntoyz243 ай бұрын
Glad to see im not the only one chopping on a brand new motion column. I body dropped my 01 blazer and had to drill a hole similiar but right at the floor pan.
@user-zn6ts5yd8f3 ай бұрын
Bump fer algo
@piii66023 ай бұрын
Where in phoenix is your shop homie? I have a 2 DR Blazer in Tolleson @ my MIL house I'm tryna get running again & bring back to Dallas 🤙🏽
@RobbyVsGarage3 ай бұрын
Wittmann, AZ
@STeter763 ай бұрын
Love the switch suspension sticker on your welding hood. I went to thier shop last year and they are awesome
@RobbyVsGarage3 ай бұрын
I used to work there 👍🏼
@rpturbo4 ай бұрын
That thing does sound sick. I don't know if its the cam, or the turbo being open or what, but it sounds killer