my batteries were puffed up so badly that I was able to pry the batteries out by hand. otherwise, I wouldn't have considered using a screwdriver on a puffed battery. still, I didn't know they were "glued" in place. helpful all in all.

I do have that

This helped a lot thanks! Got my lights from Amazon I have a Range Rover 2012 HSE and it worked perfectly

Good video but gee......Thanks Apple. (FFS)

Hi, They every year in MOT don't like High Beam on my RRS 2012, High Beam are too high third year , third MOT time. There are no screws for adjusting, only pair for Low Beam , - as goo gle says - both Beams are adjusting together.. Anyone had this problem with similar headlamps of this RRS?

And don’t bother pulling the adhesive strip on the new one. Those batteries are going nowhere. They are crammed in there.

I’m glad I watched this vid - it saved me time… However, I also am glad - once I got to the point where this guy fessed up to puncturing part of the battery with a too-small s/d and the stinky and dangerous mess it made - I watched the next vid that came up for me, as the maker was more cautious, professional, and thorough. I would not have gotten through the process successfully just watching THIS vid, as there are important steps omitted (removing screws, tape, connectors and adhesives). On the other hand, I would not have gotten thru the process as quickly without THIS vid. Thanks again! The other vid I watched was Kamil Kuzniak (or Kuzbiak) kzfaq.info/get/bejne/qK6cqdqDttKwloE.htmlsi=IyK6ICVTDktS-oKD “2015 MacBook Pro Battery Replacement”

You shouldnt use any metal tools near LiPo batteries unless youre sure what you are doing but i still wouldnt recommend it because if you want to remove the batterie its likely already broken so its even more unstable. Damaging the battery can cause fire and or explosion and is prevented by using plastic tools without sharp edges.

Dude!! 🙌🏼 I’m no mechanic but this video details every step and detail perfectly!! I changed both headlamps in 15 minutes without a hitch… thank you so much for this valuable information!

A really nice video production. A complete tutorial. I can't wait for the weekend when I'll give it a try.

Thanks! You just saved me a whole bunch

oh man that sound of metal, you should use plastic tools.

Very helpful thank you for easy explanation

This helped me out on a customer's car. They were very appreciative! Thank you! 😊

Great job bro!!!

I was able to make this work on my mac with old and swollen batteries. I could not believe how much adhesive they used. Thanks for the video.

Are the ones in the video the original Factory Bulbs?

Life saver! Thanks!!!

Awesome! Thank you for the video!

Thanks a lot!! Saved me a lott of time and hazzle. Worked fine on two computers. Allso a MAC Book Pro from 2012

hi can you tell me how many batteries exactly is there 6

hi mate, i have replaced MAFs on new ones, after 3-4 km driving I am getting P0171 and P0174 and engine and body is shaking on idle, shall I adapt somehow new MAFs or do some distance and car will solve it itself ?

Use a plastic spudger, not a screwdriver 🤦‍♂️

Thanks SO much for this video - it saved me tons of time and really eliminated the possibility of damage to the other parts from uninstalling and reinstalling. I went slow and was able to pull the center batteries without a tool, as you suggested. I had the battery replaced in 30 mins! We’ll done!

Thank you, Sir! 👍

The internet ... the modern university of everything. Thank you, you spared me some dough and I very much appreciate you for that! You rock!

Great tips, thanks!

Does both sensors need to be facing the same way towards the engine.

Do yourself a favor and get something like this www.amazon.com/GOOACC-Removal-No-Scratch-Molding-Fastener/dp/B081LD5GNJ/ref=asc_df_B081LD5GNJ?tag=bngsmtphsnus-20&linkCode=df0&hvadid=80882941400106&hvnetw=s&hvqmt=e&hvbmt=be&hvdev=c&hvlocint=&hvlocphy=&hvtargid=pla-4584482468232512&th=1

Just saved myself a bit of money watching this vid I was just going 2 Halford,s it's that easy a chic can do I reckon I just saved myself £50 buzzing so great vid 😀

Is there a difference between oven made jerky and a dehydrator?

Great to know! I just bought a used 2015 retina with a good stock battery so I wouldnt have to do the tear apart task to replace a battery. I wondered if it could be done without tearing the machine apart. I see the nuances and cautions that need to be taken. I've read suggestions of using a putty knife - I have a set of plastic putty knives/spreaders - look for plastic ones they will be a safer tool to use.

Do you have a video on the wiring to the headlight?? I cannot figure out why my lights totally don't work even with new bulbs. I'm thinking wiring or something

I dont store in fridge for maybe 5-7 days its in a air tight tupperware on counter

Thank you so much man, I watched your videos and went for it. If anyone has trackpad issues after just make sure that tape on top of the battery is fastened and plugged in correctly. I had to redo that step after turning the computer on to no avail.

You guys need Biltong! Goodness

Rubbing alcohol releases the glue!

Left side: Okay this is difficult Right side: This was way easier Middle: HOLY F@$! HE DID THIS WITHOUT TOOLS!?

Great advice. The trick of starting with the batteries 2nd from the end worked great. I'd like to try the "thread" routine - pull something like fishing line between the battery and case.

Thank you for this, I can’t believe the schematics and how Apple designed these batteries in, it’s totally ridiculous and cumbersome, they could definitely have had a better design in 2015, they do it so you’ll bring it to an Apple tech so they can squeeze more money out of you, because that’s what Apple does , I’m one of those people that likes to tinker and fix things myself ,anyway thank you again for taking the time to post this

Wow, people love to tell you how you're doing it wrong cos it's dangerous or whatever. You did great and lived to share what you learnt with the world. I like your idea of careful prying, thanks for sharing it. Thanks for openly admitting that you made a mistake and nearly started a battery fire. They are much more exciting and shocking to observe than dangerous as long as you do it away from other combustible materials as it doesn't take long for the flammable solvents to burn away. If surrounding things catch fire. Extinguish them with water when the battery has stopped venting. Fire extinguisher would be handy to keep surrounding things from burning but won't extinguish the battery fire most likely. Just have to let it finish venting. This guy didn't hide anything. He told us everything he did and what worked best for him. We are all learning, none of us know everything. Just say no to safety "experts" who get a buzz from any chance to tell someone off. To the safety "experts", get a life. Do something interesting and contribute to the world. Unless it's egregious, telling people off for this stuff only discourages open and honest sharing of information and nobody likes you!

Thanks

Thank you soo much! Video should be how to replace your mbp like a boss! I have not replaced my battery since purchase 2015, Mainly because iFixit just well.. playing safe. but now my cycles have come to the end and omgsh I wish I had found your channel earlier! Thanks again, life saver!

Thanks, this helped me a lot and saved a ton of time! I did what you suggested, stated with the battery right away and removed the 2nd piece first and then the rest. It worked out great and the the battery removal process (after I removed all the screws and the touchpad ribbon) took literally 10 minutes! Though I did use adhesive removal that came with the iFixit kit and some pretty wide (much wider than screwdriver) pryer. Also the fact that my battery was very swollen, strangely, helped because due to that swelling some of the adhesive, I guess, unstuck naturally over time. Thanks, Cheers!

How the hell do you look at the word "Worcestershire" and conclude that it's pronounced "wurr-stir"?

Yes metal may not be ideal, just don't use anything small and sharp. I used a 2" flexible putty knife because it was thin and wide. It was super easy to get under the edge and pry the batteries out easily. My batteries were leaking one of the chemicals already. I could small it when I opened the case. Battery installed with no issues. Did remove trackpad cable from motherboard and trackpad to protect it. Easily removed and replaced. Thin and wide, regardless of what you use, works quick and fairly safely. My plastic tools were too thick especially for the batteries over the trackpad.

Is the salt necessary for curing or can it be left out?

I bought this one year ago, but it is broken now. Several days ago, I got a WILDDIGIT stainless steel jerky gun. That is much better than this one.

So....you claim to have watched all these other videos, with many more complicated steps, but you didn't even pick up the BASIC instructions to not use metal tools to remove the battery? Seriously?

I used my aunt's SNAP benefits card to pry the battery out. Worked like a charm.