Good day Erika. The product itself is not costly. Most of the cost will be in the surface preparation required depending on your substrate, and then the labour to apply the product. If you would like more information on pricing for your specific project please get in touch through the Contact Us page on our website :) Thank you and have a wonderful day further.

Good day. We have shipped product to Australia, so yes, get in touch ;) Please completed the Contact Us page on our website and we'll get back to you to discuss your project requirements. Have a wonderful day further :)

Hi @swisscotx. Great question and we have actually written a blog on this exact topic. Read it here: www.cemcrete.co.za/fireplaces-tips-tricks-when-using-cemcrete-products.html. Have any more questions let us know :)

Hi @r0nea. Once the final sealer has cured you should be able to paint over it. Just remember that solvent-based paints may affect the sealer, so rather stick to a water-based paint to be safe. We'd love to see your mural when you're done - email us at [email protected].

Hi @luannetaylor4213. It is indeed! So happy you love the look :)

Hi @euphoria156. It sounds like the knockdown finish you are referring to may need to be sanded, but you are welcome to send us photos to [email protected] and we can take a look and advise accordingly. Have a fab day further :)

Hi Sheilla. Thank you for your comment and question. By removing the tiles you should be left with a height space you need to fill; if between 8 and 20mm, you can use our SuperScreed, followed by Colour Hardener (as shown in this video), or wait for the SuperScreed to fully cure and then apply RenoCrete or CreteCote (interior only) overlays. If you would like more assistance with product information, etc for your project, please email [email protected]. Have a super day further! :)

Hi Ruslani. Yes it is a type of microcement. If you want more specific information for your project, please send us all your project details to [email protected]. Look forward to hearing from you. Have a super day :)

Thank you! :)

Thank you so much @Luke Hunter :)

Hi Miguel :) All our products' colours and information are available on our website (www.cemcrete.co.za), as well the download tabs under each product. Send us an email to [email protected] and we'll gladly send you the relevant documents you require. Have a super day further! :)

Hi Aparna. Thank you for contacting us. We are based in Johannesburg South Africa, but can ship from there. Please send your project details and product requirements to [email protected] and we will assist you with your order. Thank you so much. Have a wonderful day further :)

Good day Hooch One. Thank you for making contact. Please can we ask you to email us at [email protected] and we will be in touch to discuss your project's specific requirements as both your questions require more information in order to answer fully. Thank you so much. Have a super day further! :)

Good day GB. Please send us your contact details and we'll make sure to get the agency in George to contact you urgently. You can send your details to [email protected]. Have a super day! :)

Hi Israel Angeles :) The final look is very similar to stucco, but they are manufactured from different raw materials, and therefore the application process is a bit different too. Our products are cement/based :)

Hi Scott. We don't have a demo video as of yet. However this off-shutter look can be easily created a number of ways. You can either cut the underlying plaster first, and then coat over with CemCote Skimmed (as seen here). Or finish the plaster work flat, and then use a thicker render as the final decorative coating, such as our RenoCrete, which is applied as normal, and then cut and shaped while biscuit hard, in the size and shape of your choice :)

Hi Ozzy. Not yet, but if you are interested in importing it we have sold and exported to many countries around the world. Please get in touch through [email protected] and we can assist you. Have a super day :)

Hi Effort Ntuli. This product is perfect for residential projects, and if maintained correctly can last 10 years or even longer. The most important aspect is to regularly use a relevant polish or mop and shine (such as our CreteCare Range), which protects the sealer. And if required, strip down the polish and reseal, to extend the floor's lifespan even longer, all depending on the amount of traffic and wear and tear :)

Hi Prasad Medidi. Cement-based coatings are applied by hand, and are naturally mottled and show colour variation. Trowel marks are often visible as well. These are all part of the look and feel of this type of product. If you have a specific query on a project you are busy with, you are welcome to send info and photographs to [email protected] and our tech team will assist you from there. Have a super day :)

Good day Phili200 :) Yes, SatinCrete can be applied over a previously painted surface, as long as the paint and below substrate is not flaky or friable, and is in good sound condition. The painted surface may require additional preparation before the application of the SatinCrete. Please send us your project details to [email protected] and we will assist you with the relevant information for your specific project. Have a lovely day! :)

@@cemcrete_ Thank you for the reply

Hi FreshVanessa. Same way you would remove any cement plaster or such :)

Thanks for the love Violeta :)

Hi Sibongile. You can use any of our wall products such as SatinCrete, CemCote Skimmed and RenoCrete. With the correct preparation and sealers, and applied smooth, these are perfect for the shower environment as an alternative to tiles. Please send us your project details to [email protected] and we'll assist from there. Have a super day :)

Thanks for the thumbs up Play designer 👍

Hi Renz. We have a variety of sealers for different purposes and overall final finish (eg: gloss vs matt), whether exposed to moisture or not, and so on. It would be best to send us your project details and requirements and we can advise from there: [email protected]. Looking forward to hearing from you. Have a super day :)

Hello :) Thank you very much Robert!

Hi Rory :) Thank you so much!! The fiber cement board would just need to be primed before the CemCote Skimmed application, and then SiliconSeal and final sealers applied over that. As there are so many substrates one could apply this to, and there are varying systems in different countries, perhaps send us your project details and we can send you a specification. You can email us at [email protected]. Have a super day :)

@@cemcrete_ can I put cemcrete over painted walls?

Thanks Jennifer! :)

Good day Landscape Chasers :) Please send us your contact details via email to [email protected] and we'll send you all the relevant information and assist you from there. Have a super day!

Thank you so much! :)

Hi Silver. We absolutely love this bathroom too! :)

Hi Shahin. This is a micro cement. A skim coat is usually used for repairing or levelling out a surface, and can be made from various substances depending on the application :)

Good day Mercy. Yes there is a retailer selling our products in Zimbabwe; please send us an email to [email protected] and we will put you in touch with them. Have a super day :)

Thanks Jenny :)

Hi Jerome :) Yes you can, as long as the tiles are steadfast and not prone to flaking (eg: slasto). The tiles will need to be prepared before our products can be applied, and the final finish will always rely on the integrity of the tiles and structure. If you'd like more information on the process, please email us on [email protected]. Have a super day :)

Hi Bernie. With the correct preparation you should be able to. Please send us more information on your specific project and we will get our technical team to put a specification together for you; email us on [email protected]. Have a super day :)

Good day Lincoln. Our CreteCote is the floor option of Cemcote. Please visit CreteCote on our wesite for more information: www.cemcrete.co.za/cretecote.html. Have a lovely day :)

Hi Shailja. SatinCrete comes in a range of colours to choose from which can be found on the product's webpage here: www.cemcrete.co.za/satincrete.html :)

Hi Andrew. Thank you for your feedback. Even though the whole process may take a few days to complete, allowing each coat to cure, the application itself is not labour intensive and is relatively quick (depending on the size of the object of course), and the benefits of this system far outweigh the time taken. It is an opportunity to recycle polystyrene and create lightweight, unique pieces. When used in an actual building installation, the process is no more intensive than other traditional building methods such as brickwork, plastering, priming, etc which also require curing times and so on :)

Good day Hanichan. We have supplied to many projects internationally from our base in Johannesburg, South Africa. Please send us your project requirements and our international sales manager will be in touch with you: [email protected]. Have a super day :)

Hi @Relaxmaniacs. Please contact our marketing department via email ([email protected]) to discuss your query. Have a super day :)

Hi Clarece. Yes you can :) There may be extra preparation products / procedures required depending on your substrate, as well as different sealer options depending on the final finish you want to achieve. Please pop us an email ([email protected]) with your project details and where you are located so we can put you in touch with the relevant representative to take you through the process. Have a lovely day further :)

@@cemcrete_ can this be used on tile?

Good day Celeste. We have a product called CreteCote which can be applied to flooring in a similar way kzfaq.info/get/bejne/bcuAfMWD27Syc6M.html :)

Hi Linda. We presume you are looking for Colour Hardener product samples; this is not a paint ;) Please send us your contact and project information to [email protected] and we will see how we can assist. Have a lovely day further.