I Have a DJX 900 USB but I think I will be buy this table mixer very polyvalent , best value !

I keep hearing if you keep using then keep switching on/off mixer a lot it do slitch n stutter abit n go all weird that’s 3 pro djs making that comment but to be honest everybody is praising the ddm4000 I jumped in at the deep end n getting somthing to grow into instead ov out growing a lower end mixer then buying again got mine a bargain in uk brand new £220

Only had mine a wk from new way over my head I’d like to know how on earth you can set them both up running on same bpm so it matches for you all I’m getting is flashing 120bpm on both channels bloody midi clock n this stop button on screen proper lost me a lot ov watching vids n learning to use this properly n the worst thing is they can get me my bloody vinyl delivered until 5jan so 7in raga for me until then

Watching this in 2022 and this video is giving me all sorts of 2009 vibes. I love it. I just ordered a used DDM-4000 and can't wait to put it to use. It's a total secret gem from Behringer. It's got functions that mixers now are only starting to roll out. I love that you can run dual sources on each input too. That's just insanely awesome and totally makes sense. Why has no other manufacturer done this before?! This is probably the best video review I've seen of the DDM-4000 so thank you!

hey man thank you for the thorough explanation i need to know some things where can i contact you please ?

I did find the switch, but it isn't in a convenient location for easy on/off. Especially if you rack mount your mixing board it would be a problem to access.

I have an old analog mixer I bought in the late 70s, but it probably was built in the late 60s. I've been having problems with it so I bought the DDM 4000. The first thing I found troublesome, was the on/off switch wasn't obvious. There are a bunch of switches for the effects, but I didn't see the power on off switch listed in the instructions. Pulling the plug is not the way I prefer to cut power.

Great video but how do you connect the GRD wire of the turntable to the GRD of the ddm4000 mixer

The problem is, since the thing is so old, the videos are of really bad quality. it would be time to make new videos, because there is nothing comparable in the price range

Hey man. Ive just discovered the existence of this mixed. Looking for something to add to my Akai Force along with a synth. Good complimentary?

Does anyone know if the effects can be used without serato?? And just analog turntables

I can truthfully say that if you're not extremely heavy handed and use this mixer with som degree of love and care, it will last you for years. I'm a pro DJ and I'm all Pioneer, and have been since the mid 90's, but at the end of the 2000's I started a business and I really wanted the DJM-800, but I just couldn't afford one. My DJM-500 started to get pretty worn out after 14 years of use so I had to get something, and that something was the DDM-4000. I had it as my primary mixer for a couple of years and after that it's been used off and on at home and I've lend it to other DJ's a number of times. Now +11 years later, the only thing that has thrown in the towel is the bass boost button for the head phones, or it has just clogged up because I don't use it. I have the Pioneer over ears head phones with enough bass, but sometimes the highs need a little push, and that button still works. I think it was the first DJ mixer with frequency buttons for the effects. Pioneer didn't have one until the DJM-2000 that came out in 2010, and no other mixer from Pioneer had it until the NXS2 and the 750 MK2 came out in 2016/2017. Even the DJM-750Mk2 is three times the price of a DDM-4000. It still is the only DJ mixer with a dedicated XLR sub out. If Behringer released a DDM-4000Mk2 with a build in sound card, dedicated filter knobs and few other tweaks and improvements, they could double the price, and it would still be the mixer with the best value on the market.

Your comment about TROS feels very Mike Zeroh like and that’s not a good thing.

Good vid

Good video fella. Just a quick question, how accurate is the BPM counter, does it give a reading to a decimal point?

Dj deanthomas , would you still recommend this?

Looks like a pos... I am a 900 Nexus man in my old age but I remember friends buying these budget mixers back in college

Hello, I am having trouble getting the volume faders to work on my DDM4000. I dumped the previous setting the original owner had and then I lost functionality of the volume faders. Also, are there any good tutorials on how to program this mixer, the user manual does not explain much. Thank you. Francisco

Hey I have the DDM4000 also and when I connect both my speakers in the back the left only plays on left and right on rift only, can you or someone help me have the music playing threw both speakers at the same time?

which firmware for the cdj is needed to work with virual dj?

A mixer with a 30 sec SAMPLER, oh shit thats cold. Did you look at the price for the Pioneer DJM T1?? 1.5K(with NO effects).. ddm4000 = $400 Thats 1/3 my income a month compared to a whole months pay. INSANE! I got it used for $180 on Ebay bitches. Oh yazz mu fu!!

I just won it on Ebay for $152 for 30 shipping, I cant fucking wait till I hook my Microkorg, Kaoss pro and Kp3, as well as Midi Launchpad on the soundcard out. This shit is so underated. Fucking crazed for real. I got behind on my rent and I never dont pay my bills. This is my happiness for sure. So excited about this cheap piece that should be a solid 1K in price for the bang. This piece of shit is far from a low end chunk of hardware from the research i've done. Pioneer is just an expensive name and I would have had to get a DJM3000 to be happy. This stomps the NOx series for sure. Fucking exstatic about this on its way!! Its got full programming, crossfade versatility, a large effects bank, SAMPLER!!! WTF!!! I Got a 10 foot boner right now.

Or!!!!! You can forget all that shit and just put your music on a flash drive and THATS IT!!!!!! Your done!!! Your good to go!!! Set up time for that is about 4.8 seconds!!!

great review, but please stop saying uhhmm all the time, its irritating..

on my mixer the bass was cut.. dont like how sound

this mixer have problem left from factory, i have one and i sell it, tnx GOD

Hey DJ Dean Thomas great review there, i have a question. when im using the DDM4000 in midi mode will i still be able to use it as sound card to send the sound to my speakers?

Hi, im having problems when i turn on the mixer, appears this message "ADJUST VR24 FOR BEST READABILITY" suddenly all LEDS keeps ON, i searched on the internet and seems a usual problem on this MIXER, too bad behringer!

hey. can this function be used with Dell Inspirion Laptops???

DDM 4000 for the win

You bet. Thanks for the positive review.

Thank you very much.

love it

Well said Dean! I've had glitches with VDJ too but I still chose to stick with it cause of its interface. Also once I hooked it up to an external asio soundcard, it seemed to work much better. Very informative video, love it!

Like it :P

Can I connect this to a laptop with Virtual DJ and record my mixes?

Thanks for your support. I'm not sure what could be wrong with the upload, if your original file is good. I would check all of your connections.

We are in la class right now

Hi nice one Dean, hey buddy a weird thing happened I uploaded a new 10 min mix by DJZ mix comp at some points the sound goes missing and sound quality is also gone bad this was my third attempt do U have idea about this as the original file on computer is fine only when I upload it....let me know if have something wrong. Thanks DJMukt

My buddy had the same issue. His shit the bed after 6 months, mine is still running strong. Behringer makes products that are good bang for your buck, but very inconsistent when it comes to quality control. You should have a 1yr in store warranty. I would take it back and exchange it for a different mixer.

No you shouldn't have that issue with the 2000. I have a sneaking suspicion that the S7 sound card is causing you issues or it could be a config issue with the S7 sound card and VDJ. The CDJ 2000 sound cards are meant to be used with all dj programs.

Hi, I m using a mac. I have a Numark NS7, the sound from virtual dj comes out very weird especially when scratching. But works fine with PC. I wanna get the cdj 2000. Do you think it s gonna cause the same problem ? Please respond ASAP [email protected] call or text (917) 600 6915 Dj Kassper-GWTM THx.

Am I the only one having problems with this mixer after only 5 months of use?! It lashes out and all the lights turn on and music goes crazy! Already blew 2 speakers because of this!!! Help!!! Behringer is shit and they dont help! Please if anyone has a solution let me know!

My mixes are mixed from the booth out and into the camera.

how do you record your mixes on this mixer ? like others have the booth , how do you do it on this one ?

Excellent video! :-) Thank you - This is Davidson Ospina :)

es bueno

excellent review

But in the mean time if your straped for cash and on a limited budget, then get this mixer and upgrade down the road when you have more cash.

Sorry for not getting back to you sooner...its been a bit crazy lately. You can use this mixer with tracktor, it is traktor certified...but heres the deal, its a decent mixer but will not stand up over a long period of time. The general rule of thumb...the more expensive (depending on brand name) the longer it will last. For example, if you were to buy a Pioneer or Allen & Heath or a Denon etc, those mixers would last you a life time...take alicking and keep on ticking.