Cool. But it needs to be adjustable so the imaging isn’t off center. Just square is easier than centered and square. Got any products like that?
@marcosmenescal29622 ай бұрын
Two years ago, I reached out to Lotus Laser seeking information and guidance, and I was thoroughly impressed by their prompt willingness to help me. Even though plans changed on my end and I decided to hire a third-party company for our laser engraving needs, the helpfulness and professionalism of the Lotus Laser team left a lasting impression. I am not a Lotus Laser customer yet, but having such a positive experience without being an actual customer makes me feel confident in their capabilities and quality, and I am compelled to purchase one of their systems in the future.
@EvandroEloyAmaral3 ай бұрын
Qual configuração usar em uma 5w?
@OliverPartridgeMark3DUK4 ай бұрын
It's a pleasure to be working with Lotus Laser Systems!
@PickUpGaming4 ай бұрын
Would a co2 galvo laser be more precise
@mikem24036 ай бұрын
Have you also engraved the metal side? Any idea if a fiber would work there, especially for color engraving?
@afakasibabe8 ай бұрын
What power and speed is this one using please?
@Lotuslaser8 ай бұрын
Thanks for your question. Power is 100% (75w) and speed 600mm/s. With this product it's important to understand multiple passes give a cleaner mark rather than less passes at a slower speed.
@afakasibabe8 ай бұрын
@@Lotuslaser thank you appreciate it
@Alexander-sz1is8 ай бұрын
What settings did you use to get the red color?
@Lotuslaser8 ай бұрын
The settings that we used will unlikely work for you. Even if you had identical hardware, each machine requires finely tuned parameters. Red is one of the most difficult colours to achieve. We help you find these settings during the support process.
@Alexander-sz1is8 ай бұрын
@@Lotuslaseryeah I can’t seem to get the color red only darker reds
@dhaanyakatoch70678 ай бұрын
can we engrave a halftone design on an area of 500mm x500mm...please advise
@Lotuslaser8 ай бұрын
Not with this machine. It is designed to mark in tiled areas. For halftone marking over large areas you need DFGL technology like our MetaD, which as standard can mark 800x800 but to special order can mark up to 1.2x1.2m. MetaD will mark halftone images perfectly at this size and in very fast speeds, much faster than any plotter type laser machine. Please contact us via our web site if you have further queries about MetaD
@kurtulusyldrm62989 ай бұрын
Hello, I want this machine too. Can you tell me the brand and model?
@Lotuslaser9 ай бұрын
Hello, this is the Meta-C UV from Lotus Laser. Please get in touch and one of our team members will be happy to help with your request. Phone: +44 (0)1268 567540 Email: [email protected] Thank you.
@kurtulusyldrm62989 ай бұрын
Merhaba bu makinadan bende istiyorum marka ve model atar mısın
@lysanderbock150910 ай бұрын
What are the parameters ?
@Lotuslaser10 ай бұрын
Parameters will be specific to your system configuration. For Borosilicate you need use the max peak power your laser is capable of and the speed is slower than for regular glass too.
@mwsfabelevator408311 ай бұрын
what machine is this and what is the price?
@Lotuslaser11 ай бұрын
The machine in this video is our model Meta-C, which is our highest performing fiber laser marking workstation, however, any of our MOPA systems can produce this result like nMeta or uMeta. You do not need the bigger Meta-C. Please contact our sales department for pricing
@nightwalker3569 Жыл бұрын
What is video cover font style ?
@Lotuslaser Жыл бұрын
We no longer have the file used to make this video. the font is a version of Script but I am sorry, we do not recall exactly which version was used
@CalyoWiselyLaser Жыл бұрын
Looks nice.
@wellmanandwoodsonaxebladew3741 Жыл бұрын
What settings are used for this?
@jezzalinko Жыл бұрын
what are your settings for the colours?
@Lotuslaser Жыл бұрын
The settings we use will not be relevant to your machine. It varies between the systems we build even if they are of identical configuration. In other words, to repeat colour replication consistently the actual settings are specific to one machine. The margin for error is extremely small and takes time to to achieve. We cover how to do this during our 1-1 training sessions
@jezzalinko Жыл бұрын
@@Lotuslaser that's a pretty bad cop out You can share your settings to give a baseline and I can work on it from there That line is used widely by people not willing to help in the fiber laser community yet in reality sharing your settings I bet I could replicate the results in the matter of a hour or two at most it may need slight tweaking but would get me in the ball park Thanks anyway but I wouldn't spend money on a company that isn't willing to help others, you could very easily share your test file or even share your settings to help others in the community.
@phapmai164 Жыл бұрын
Is this 5w ?
@Lotuslaser Жыл бұрын
Yes. Full details are in the video notes section.
@kamoteph2732 ай бұрын
how many passes?
@alijuttgondal7099 Жыл бұрын
Price in Pakistan?
@Lotuslaser Жыл бұрын
Please contact our sales dept via our web site for system configuration options and pricing
@trush270b Жыл бұрын
Hi there, Is there any tips you're using to achieve such a result ? Specifically the fact that you're marking the wood more than you're engraving it. Is that a DC laser source feature ? Or a special settings set up ? Thanks for your reply. G.
@Lotuslaser Жыл бұрын
Thanks for your enquiry. This system is using a DC laser. A good result like this depends on a combination of all of the following: a high quality and well tuned laser + a near perfectly assembled motion control + expert set-up and configuration. You need a decent halftone image too. If the laser is not good you will see inconsistent shapes to the halftone and variations in shade that should not be there - in particular at the edges of the image. If you have visible banding this is usually a problem with the motion system. If your hardware and laser are set-up well and you still get bad results then it'll be bad software configuration. Note also that with a DC laser speed is relative to quality i.e. faster = lower quality
@trush270b Жыл бұрын
@@Lotuslaser Thanks for your answer, but I was talking about not engraving the wood (but really marking, etching it), looks like there's no depth at all, that's what I want to obtain.
@Lotuslaser Жыл бұрын
@@trush270b That's just a question of power; turn it down
@ramadhanabdul7716 Жыл бұрын
I believe technology aside of its disadvantage can be of great help for eliminating human error, if this business opportunity can be used to our health facility e.g during surgery it can help reduce death during operation
@coulterjb22 Жыл бұрын
Will a UV cut through the leather as fast as a fiber or slower and cleaner?
@Lotuslaser Жыл бұрын
Fiber is not good for cutting leather. Usually a CO2 laser is used but with CO2 there is a lot of heat damage. UV creates a much cleaner cut with far superior detail, however, it's only good for the scan area of the lens (150mm) so UV is definitely the way to go if you want to cut small sized, high quality, high detail parts
@ProfessorOfEconomics Жыл бұрын
What are your settings for the PU leather?
@Lotuslaser Жыл бұрын
The settings that we use will be specific to our system config. Basically, you need high speed (approx 1.5m/s), low PRF like 5kHz and low power - start with the lowest power that you laser can deliver with stability and adjust upwards. If this is your core app then you'll get a much better result using a UV (355nm) laser
@shannonandrei Жыл бұрын
How much for this?
@Lotuslaser Жыл бұрын
We have a number of different configurations of this model. Please connect with our sales team for more information www.lotuslaser.com/contact/
@andresminayadurand1519 Жыл бұрын
Hola, que parámetros usaste??? Por favor 🙏
@Lotuslaser Жыл бұрын
The parameters are only relative if you have our equipment so our parameters will not be useful to you
@jitendragiri8512 Жыл бұрын
Sir price in India
@Lotuslaser Жыл бұрын
Please connect with our sales team via this contact form www.lotuslaser.com/contact/
@kellynbrusius6781 Жыл бұрын
doesn't PU leather contain some chlorine or polyurethane?
@Lotuslaser Жыл бұрын
Marking PU is relatively safe, however, an effective form of extraction is essential. If this is your core application you should take a look at our UV laser marking machine. as it produces a far superior result compared to the CO2 laser that we have shown in this video here.
@luoedison8122 Жыл бұрын
does working plate is customied for this tags?
@Lotuslaser Жыл бұрын
Sorry for the late reply. We were on holiday. yes, this plate is customised specifically to cater for the customer products
@luoedison8122 Жыл бұрын
not bad
@GZTECH2018 Жыл бұрын
nice work, what laser source you used?
@Lotuslaser Жыл бұрын
sorry for the late reply. I was on holiday. In this video we used a 30w MOPA fiber laser
@equizx1 Жыл бұрын
Excelent work but how you do that?
@Lotuslaser11 ай бұрын
@@equizx1 it requires very high quality laser, optical and focus components + a lot of know-how. This is part of the Lotus advantage as we can deliver all of these things
@kaischaffarczyk6499 Жыл бұрын
Hello, since months I´m searching for the right settings for this run Can you please help me and give me all details to mark anodised aluminium ? I have a 30 x mopa Lotus Laser system Thank you Kai
@deanlaserite Жыл бұрын
Hello Kai. You should connect with our support department. They can help you solve your problem in minutes. Not months. When you contact us please have your system serial number ready.
@kaischaffarczyk6499 Жыл бұрын
@@deanlaserite could you give me a contact adress please ?
@kaischaffarczyk6499 Жыл бұрын
sorry have find it at your website - thank you
@kaischaffarczyk6499 Жыл бұрын
@@deanlaserite sorry again my email to your support adress comes back as non deliverable could you please contact me by email ?
@Lotuslaser Жыл бұрын
@@kaischaffarczyk6499 the email is [email protected] If you have email problems then there is also a contact form on our web site that you can use to connect with us
@luoedison81222 жыл бұрын
best rotary so far 💯
@luoedison81222 жыл бұрын
good
@Natural-finish2 жыл бұрын
This is not CO2 that im looking fr advice on ?
@deanlaserite2 жыл бұрын
I don’t understand your question but if you contact us via our website we’d be happy to give advice
@nameitpk2 жыл бұрын
Price
@deanlaserite2 жыл бұрын
Our UK manufactured MOPA fiber laser systems are available in a range of formats and accessory options and start at £15k approx. For more details please contact our sales team via our web site
@Lotuslaser2 жыл бұрын
We have a number of systems that can produce this. Please contact us via our web site and one of the team will provide further details. Thanks for watching
@CorporateCoachbd2 жыл бұрын
What' the price of it?
@Lotuslaser2 жыл бұрын
There are several configurations that influence the price. Please connect with [email protected]
@HanBinhPhatTechCoLtd2 жыл бұрын
nice
@gurmeetsingh8262 жыл бұрын
Cost for this project
@Lotuslaser2 жыл бұрын
please connect with our sales team via the contact links at our web site
@niteshbapna11992 жыл бұрын
Resale Rs. Sand
@niteshbapna11992 жыл бұрын
Sir please sand your product to seller for India important number I am a reseller co2laser Machine and fibre marking machine from India Rajasthan
Better than painfully peeling off those annoying stickers
@YAOG2 жыл бұрын
Thats beaufitul. Should I go with a 50w jpt or a 30w jpt mopa?
@Lotuslaser2 жыл бұрын
more power is not an advantage for this application. The specification of the laser is more important
@rosseasson94412 жыл бұрын
Nice. So the galvo UV worked better on the outside of the glass but in one of your other videos, the (C1) C02 worked great for nucleating the bottom of the glass for beer. Am I correct?
@Lotuslaser2 жыл бұрын
Hi Ross, yes, for nucleation there is no need to use a UV laser. An advantage of the CO2 for nucleation is the size of the spot. Normally, it's the opposite i.e. the bigger spot is a disadvantage. But you can nucleate the glass with a UV. If you only want to nucleate glass I'd say go for a CO2. If you want to engrave and nucleate then go UV.
@rosseasson94412 жыл бұрын
@@Lotuslaser Thanks for that. I'm looking into starting an amazon business. Think you may be out of my budget but I'd still like to speak further. Should I email you via the sale contact?
@Lotuslaser2 жыл бұрын
@@rosseasson9441 Budget Ross is relative to functionality, performance and reliablity. We are far from the most expensive out there but we do claim to have the best all-round package in many formats; most especially the UV. With UV you also need to be super careful re safety. Most of the low cost imports you'll see are great for taking eyes out and they are next best for costing more in lost productivity and opportunity. Please contact us via our web form and one of the guys will run you through what's available.
@rosseasson94412 жыл бұрын
@@Lotuslaser fantastic thanks for your time.
@timgesner6916 Жыл бұрын
Link and price of the specific machine for engraving glass ?
@JBStones2 жыл бұрын
How well can a UV laser engrave other types of wood, Hard vs Soft? as well how deep can a UV laser engrave into wood. And last questions for you is there anything stopping you from running the piece back under the same path to engrave deeper?
@Lotuslaser2 жыл бұрын
depth relates to the intensity (power, spot size, etc) and the exposure time ; it's controllable and with UV you can achieve similar depths to that of other wavelengths but with higher quality. The trade-off is the time as a UV will be slower than a CO2. You can pass multiple times to achieve the depth but generally a single pass at a slower speed is often a better technique
@northern_hd2 жыл бұрын
isn't that a fiber laser? Not CO2
@Lotuslaser2 жыл бұрын
In most cases we would recommend to use a 60w fiber laser for this application, however, the purpose of this video was to show that in some cases a CO2 laser at 10.6µm can be used if the product is suitable in terms of material make-up. So to answer your question; this video shows a CO2 laser marking the mug.
@caleydeannbrunner852 жыл бұрын
What were your speed and power settings for making the black mark. I know all lasers vary but I am trying to find a good starting point to run tests
@Lotuslaser2 жыл бұрын
This is an impossible question to answer accurately unless we know the precise configuration of your machine. A MOPA laser will produce a superior result without foaming. Generally speaking you want to use a speed of 2m/s, low pulse width (high peak power - low pulse energy) matched with the relevant PRFO frequency (kHz). Hatch depends on the lens being used but if you have F254 start by trying 0.05mm and if the laser is 20w adjust power upwards in increments from 60% to get darker
@caleydeannbrunner852 жыл бұрын
@@Lotuslaser Thank you, this helps! I am running a ULS 30 watt Fiber laser with a 2.0" or 4.0" lens
@Lotuslaser2 жыл бұрын
@@caleydeannbrunner85 That is not an ideal format for this process. To achieve this effect it's much better to use a galvo laser (MOPA) with an F254 lens. Do you know the laser source? Maybe it is Q-switched? You will need to go very slow like 200mm/s or equivalent, maximum DPI (I think 1,000 for ULS?), I would say use the 2" lens but go out of focus by about 1mm (into the material). Keep focusing in by 0.5mm each time and you should notice it getting darker
@impulse80132 жыл бұрын
Does it actually prints in white colour on top of the black colour or is it just burns the surface and the white colour marking material is already a part of that material.
@Lotuslaser2 жыл бұрын
The pulse of the laser causes a structural reaction within the material that produces a permanent and contrasting mark. This is not a print process. When the material absorbs the laser, minor ablation + colour changing is the outcome.
@TusharMahajan772 жыл бұрын
@@Lotuslaser So the plastic is originally moulded in black colour right ?
@Lotuslaser2 жыл бұрын
@@TusharMahajan77 Correct, the plastic is moulded black
@jayankpache93502 жыл бұрын
Sample sir ji
@rhandlymarkmorcilla58472 жыл бұрын
How much do it cost?
@Lotuslaser2 жыл бұрын
There are a number of different configurations that affect the price. Please contact [email protected] for more details
@garybeaumont5432 жыл бұрын
How do you get the colour? Is it a change in wavelength
@deanlaserite2 жыл бұрын
All lasers have a fixed wavelength Gary. What we change is the pulse width (ns)the pulse frequency (kHz), the average power (%watts), the hatch density (mm) and sometimes also the hatch angle. We are using one set of parameters to remove the very thick powder coating and another to clean and brighten the exposed stainless steel for a better aesthetic. See some if our other video where we use even more variations in the same file to create colours. This is the benefit of using high performance laser tech instead of basic laser tech
@garybeaumont5432 жыл бұрын
@@deanlaserite thank you for that. I watched the bottle one yesterday and couldn't believe how there was 5 or 6 different colours and it was done so quickly. I'm guessing it would take a while to learn the basics of the software to do similar products
@Lotuslaser2 жыл бұрын
@@garybeaumont543 This isn't really a software only based solution. Firstly, you have to start-out with equipment that's capable of delivering the end result in terms of effect and process time. Not all systems are equal despite what many will claim. Next, the level of support varies massively from one supplier to another. Many will give you just a set of params to plug in to software but these very rarely will work for the more technically challenging apps out there and colour changing s/steel is one of the hardest of all. That's where we come in with a 1-2-1 support resource based on 1st hand experience (know-how). In short, our offering (hardware and support) allows the user to crack on and earn money rather than waste time stabbing in the dark to get what are at best mediocre end results. We have full-time staff here dedicated to apps support. This is why most of our KZfaq video are apps related.
@garybeaumont5432 жыл бұрын
@@Lotuslaser that's great to know, reasons why I've been googling your company and watching your youtube vlogs. I'm in the uk and would rather put my pounds into a uk company. Thank you for the info and help
@bol8lod11 ай бұрын
Dont be fooled the shadows proof the result is enhanced in video editing. Engravings have inner shadows not external