2 ай бұрын
6 ай бұрын
6 ай бұрын
Пікірлер
@bruceklassen8261 3 күн бұрын
Well done lads
@Camaron9769 4 күн бұрын
bought a 72 one owner completely original first of the year from my old hs teacher.... 1 owner never touched, also never washed, never took care of.... everything is there but good lord the rust in mine makes ya'lls look brand new, I'm currently repairing the frame at the rear and have repaired all the body mounts... then I have another 77 tub I am gonna piece together with the parts off mine but it still needs the passenger side door posts repaired and prob rockers... and floors lol
@CRAWLTV 3 күн бұрын
Man oh man. This is my second early bronco that I’ve ever worked on and these things were just built to rust! I have been going really hard on this thing and it’s time to film an update. The driver’s side is almost completely assembled and mocked up. I have a door hung and the gaps are correct. What a freaking process though! I can’t believe I have to do it all again on the passenger side now 🤣
@Camaron9769 3 күн бұрын
@@CRAWLTV if I can make mine just open and close I'll be happy I'm not gonna lose sleep over door gaps or anything... it won't be very pretty or fully restored I just want a sound, safe, driving, stopping bronco... although I did splurge on a 3.5" lift and some gas shocks from Rancho
@CRAWLTV 3 күн бұрын
Ours has a 2.5 inch lift on it, but we have a new set of Beilstein 5100s to put on it along with some fresh bushings.
@Camaron9769 3 күн бұрын
@@CRAWLTV I've got every dang thing for mine if I can figure out the body work lol never done any body work before.... bought me a harbor freight mig and have just been practicing on sheet metal
@markfisher9016 4 күн бұрын
Gas cap?
@CRAWLTV 3 күн бұрын
His gas caps leak like crazy so he has rubber gloves in them right now. Don’t worry. He ordered new ones. 😂
@jonathanchouinard582 4 күн бұрын
Koenig top is my favorite cj5 top. Too bad you sold it! I'd like one for my '57 cj5. Do you have a link to the ET lug nuts?
@CRAWLTV 3 күн бұрын
amzn.to/3WyzIr9
@CRAWLTV 3 күн бұрын
The top was amazingly cool. If this jet wasn’t teetering on 35” tires I would have voted that he keep it. It really provided the vintage look to this thing.
@johnstup4479 4 күн бұрын
Thanks for the update. Good luck on the Rubicon trail.
@CRAWLTV 3 күн бұрын
Thank you!
@victorvargas9111 8 күн бұрын
Mmmmmm it's to big almost took all the trunk space
@CRAWLTV 3 күн бұрын
It’s definitely a bigger piece. It’s nice that it doesn’t weigh a ton, so it can stay in storage until we plan on using it.
@jessehagle4146 10 күн бұрын
Aqualu aluminum tub
@CreamPuffGarage 12 күн бұрын
Crawl guy Luke has nice arms
@CRAWLTV 12 күн бұрын
Don’t let them fool you. They are not equal length.
@scottabbott9045 12 күн бұрын
How many miles did you have on the factory brakes?
@CRAWLTV 12 күн бұрын
They were at 80,000 miles but I bought the truck used at 45K. It’s possible they’ve been changed once before. I wish the footage didn’t get trashed because there was a great close up shot of them. They had cracked all the way through, presumably from towing.
@scottabbott9045 12 күн бұрын
@@CRAWLTVdang that’s wild I’ve got about 65k on my 2020 ram and they still look like over 75% life left which blew my mind considering I’m on 35s and I frequently tow a 7000lb camper and sometimes I’ll flat tow my Jeep. Tow/haul mode and trailer brakes really help a lot on these trucks I guess.
@PaulKaiser42 Ай бұрын
Huge upgrade to any Jeep👍🏻. Great video as always can’t wait to see it all come together!!
@CRAWLTV 29 күн бұрын
Thanks so much, Paul!
@moabwheeling1305 Ай бұрын
That was so awesome that you got those PRP seats for the Crawl TV crew. Cream puff is looking good and should be a lot safer on the Rubicon . Looking forward to your next video . Take care .
@CRAWLTV 29 күн бұрын
Thanks!! Yeah, it will be a total game changer! We’ll be installing the seats in cream puff for good this weekend and getting white lightning running. Sunday will be a progress day for the bronco!
@moabwheeling1305 29 күн бұрын
@@CRAWLTV Never a dull moment LOL!
@bruceklassen8261 Ай бұрын
Looking good gents
@CRAWLTV 29 күн бұрын
Thank you very much! We plan on making some big progress this weekend
@jessedavis4699 Ай бұрын
Heck yeah. Love seeing these old Jeeps being brought back to life.
@CRAWLTV 29 күн бұрын
It’s been nothing but fun 🤩
@Vintagejeepcj5 Ай бұрын
Cool !!
@CRAWLTV Ай бұрын
Cream Puff is a fan favorite 🤩
@Jebesm Ай бұрын
Any interest in installing an 83 head on my 85 CJ 258 that I use for my Avocado Grove? Located in Fallbrook.
@CRAWLTV Ай бұрын
That could be a fun video. I don’t know if we have time before the Rubicon Trail trip though. Do you have the new head machined, and all of the gaskets, head bolts, and fluids ready to go?
@Jebesm Ай бұрын
Just received the used head (still in box), gaskets and bolts are on their way (tomorrow).
@CRAWLTV Ай бұрын
Luke almost bought avocado property in Fallbrook about a year ago. Sounds like you’re living his dreams. As far as the Jeep goes, we could give you a hand with it but I’m not sure when. Maybe after work some time next week? Otherwise it’d be a weekend after the Rubicon Trail trip in August.
@cindymarino4969 Ай бұрын
This happened to us yesterday and the quote to fix it was $1,000!! I knew there had to be a better way. Thank you!!
@jefftheis742 Ай бұрын
I drive a yj, for your information 2003 caviler seats(2 door) were a direct bolt in on my 87,just need to space up the back mounts a little to get the right angle
@CRAWLTV Ай бұрын
No way!! That is good to know haha
@danielanaya267 Ай бұрын
Great video , it made up my mind thank you 👍🏼
@CRAWLTV Ай бұрын
Awesome! 🧊
@deltadawg9284 Ай бұрын
ME!!!
@iamblaineful Ай бұрын
I have a Iceco JP42, its the older version of what you have, and it's been in the bed of my JT-R diesel for 3yrs. I rarely strap it down, it tends to stay put fairly well. It's been over the Rubicon more than 6 times, it's my backyard home trail, so I'm kinda spoiled in that regard. It's made multiple trips through Death Valley including terrible sand storms, freezing temps, and triple digits on the regular. I've only had one issue, the cooling fan inside died, it's just a 120mm computer case fan, ordered one off Amazon and it plugged right in. I carry 3 fuse spares for it, never used one. Solid freaking unit for $$.
@CRAWLTV Ай бұрын
Dang!!! That gives me a lot of hope for how this will do once we take it wheeling! I’m really looking forward to using this on the Rubicon Trail 🔥
@Vintagejeepcj5 Ай бұрын
I love that jeep !!!
@CRAWLTV Ай бұрын
It has so much character!
@johnstup4479 Ай бұрын
"Need to go on face book market place and find another Jeep". "No, No, No." 🤣🤣
@CRAWLTV Ай бұрын
Me: “Think about it!” 😂
@lucashval3876 Ай бұрын
Why wasn't a JK frame used (Wheelbase 95.4") instead of the JKU frame? Seems like a lot of extra work to cut and shrink the frame.
@CRAWLTV Ай бұрын
The main reason was that there was a JKU frame sitting in the corner of the shop. A JK frame probably would have been easier but we had that frame already sandblasted and prepped, with the body mounts and shock towers cut off of it.
@cjg1482 Ай бұрын
What model are those seats?
@CRAWLTV Ай бұрын
These are PRP Comp Elites. They completely change the feel of driving the Jeep. They fully lock you in. It’s awesome
@cjg1482 Ай бұрын
Rancho are junk. You are lucky that they didn’t fit.
@CRAWLTV Ай бұрын
Oh good! Well I’m glad I dodged a bullet then!
@christianm3854 Ай бұрын
Is your PRP steering wheel on a quick release?
@CRAWLTV Ай бұрын
Good question! I actually tried welding in a permanent splined quick release and ruined my steering column in the process so now it’s just bolted in with an adapter on a new column 😂
@JorgeRodriguez-mo5mx Ай бұрын
Did you modify your passenger rear view mirror?
@CRAWLTV Ай бұрын
It’s not functional 😂 When I got the high school jeep, it came with the disclaimer that it had been rolled before. The tub is bent in the back corner, and the cowl is dented on the passenger side. The mirror was all twisted up when I got it, so I just did my best to straighten it out.
@JorgeRodriguez-mo5mx Ай бұрын
@@CRAWLTV It looked like your fixed the Inherent design flaw if the AMC passenger rear view mirror.
@CRAWLTV Ай бұрын
Oh! Haha! Well in that case it was totally intentional! 🤣
@ronwilson9202 Ай бұрын
did not see you in Big Bear last weekend. I broke front axle. lots of gen 6 broncos there.
@CRAWLTV Ай бұрын
Hey Ron! I’m sorry we missed that trip! We were elbow deep in the first gen. I took your advice and we ordered a 1” body lift to run 35s. I need to get that body lift in before I make my final fitment on the panels, so that I know everything is truly square. Hopefully the front axle didn’t ruin your weekend and wasn’t an expensive break!
@RonWilson-jw3rc Ай бұрын
Someone had another axel and after strapped off the trail went back to the Moose Lodge and replaced the axle and back to the trail. No one was at the gate keeper and the three of us went thru. We ended up catching my group from earlier. They were stuck behind a jeep blown out ball joint 2 hours. Very surprised to see me. Adventure fun.
@MischiefMakerTV Ай бұрын
Third times the charm! #sendit 😎🤘🏻
@CRAWLTV Ай бұрын
Thanks again for the shocks! Even though they weren’t a perfect match it was worth a shot!
@MischiefMakerTV Ай бұрын
@@CRAWLTV no problem at all! at the rate you guys are purchasing projects, I’m sure you’ll find a use for them soon! 😈
@gregchiropolos9885 Ай бұрын
I would bet your springs are Rubicon Express 2 1/2 inch. They are good springs, first time viewer like your channel.
@CRAWLTV Ай бұрын
Thanks for the comment! Any tips on how to figure that out? I think another thing that was messing with me was the custom spring hangers and shackle reverse kit stuff. It looks home made, so I don’t know how much that adjusted the ride height 😂
@johnstup4479 Ай бұрын
Heck of a journey for some shocks.😁 Glad you got it all figured out.
@CRAWLTV Ай бұрын
No kidding! I sometimes wish that I could just leave things alone. 🤣
@abnpthfdr2934 Ай бұрын
First few minutes into the video: Take your friend to the bank!!! Me: Hit like. "I already love this video!!!"
@CRAWLTV Ай бұрын
Haha! This video was really fun to make
@Ironfireman11 Ай бұрын
Crawl TV, how can I find out more details on the High School CJ? Motor, drivetrain, etc. Thanks!
@CRAWLTV Ай бұрын
I have a bunch of various videos on it in the High School Jeep playlist! If you want the general overview, it’s this: 1979 CJ7 304 AMC V8 T150 transmission (I will be swapping that out for a T18A here soon) Dana 20 transfer case Factory narrow track axles (for now) Shackle reverse kit with unknown lift kit brand Tom Wood’s Driveshafts PRP Seats, harnesses and steering wheel RockHard 4x4 harness bar Raceline monster beadlocks WARN locking hubs Baja Designs lights Optima yellow top battery And a bunch of other stuff I’m forgetting 😅
@CRAWLTV Ай бұрын
Oh! And as far as the axles go… Dana 30 front with 4.56 gears and a lockrite lunchbox locker The rear is an AMC20 with 4.56 gears and a Detroit locker. It also has TEN Factory one piece axles in it. Both axles have OX locker diff covers. I have a high steer kit from OK4WD and the steering is Rugged Ridge HD
@Ironfireman11 Ай бұрын
Thank you! Now I have a list to go by. Factory tub?
@CRAWLTV Ай бұрын
@Ironfireman11 yep!
@BattlePhrog165 Ай бұрын
VA: your back claim has been denied. Jarrett: why? VA: I'm a subscriber.
@CRAWLTV Ай бұрын
LOL! Since we last spoke my claim has been submitted. I have my first “exam” tomorrow and another Thursday. Wish me luck. 🍀
@PaulKaiser42 Ай бұрын
I can’t mount new shocks because the Northeast makes rust out of Jeep frames 😭😭 Great video as always 👍🏻
@CRAWLTV Ай бұрын
I know all too well after 8 years in Illlinois 😭 Thanks!
@PaulKaiser42 Ай бұрын
@@CRAWLTV 😂😂😭
@HardcountsAdventures Ай бұрын
Awesome vid, can’t wait to see those things on the Rubicon.
@CRAWLTV Ай бұрын
They should hopefully make a huge difference!
@albertpobre7101 Ай бұрын
much fun to watch👍👍👍
@CRAWLTV Ай бұрын
Thanks!!
@w0wsuchdoge Ай бұрын
i live on facebook marketplace and never find anything even remotely close to this. nice find!
@CRAWLTV Ай бұрын
This was one of those same day decisions, where we knew we had to act immediately! Deals like this one are super rare.
@TheHylandr Ай бұрын
Glad to see you’re back and doing well. Looking forward to more great content!
@CRAWLTV Ай бұрын
Thank you!! The crawl guys are so back. 🔥
@metaldog7128 Ай бұрын
Happy wife happy life 👍😁
@CRAWLTV Ай бұрын
You got it!
@Industrialmodels2 Ай бұрын
Fantastic work. Guys can't wait to see this. Come together!
@CRAWLTV Ай бұрын
Thanks!! we have a long way to go, and I would expect it to be a very time-consuming process once we start lining up Body panels
@bruceklassen8261 Ай бұрын
Totally get the woooohooooo when it fired up awesome episode
@CRAWLTV Ай бұрын
It was an exciting moment 😂
@veganoverlander Ай бұрын
so much fun to watch. I need to come. Offroad trail behind the house, how cool is that. 😆😆
@CRAWLTV Ай бұрын
I’m very fortunate to live where I do!
@phillippearce9680 Ай бұрын
👍
@johnstup4479 Ай бұрын
Another fixer upper! 😆 Does Paul know what he is getting into? Happy trails guys!
@CRAWLTV Ай бұрын
He has no idea 😂 The Rubicon Trail is going to be insane for him.
@timhouts6312 Ай бұрын
Get a new tub the price will hurt at first but it will save you so much time and get her on the road.
@CRAWLTV Ай бұрын
So… you’re right. And thanks for the advice. We’re already so deep into this tub we’ll make it work. It’s a fun experience, getting to tear something apart and figure out how to put it all back together though 🫣
@SeatRepairMoreLLC.JupiterFlori Ай бұрын
the crease in the hood is very common, its a weak point. I have owned three and two of them had it, if you up grade to gas struts to hold the hood open the kit has supports to fix this problem. hope this helps. dont forget to brace your tub when you remove it. my 68 was worse then yours and I had a blast fixing it up. dont get caught up in using one supplier, different suppliers have different kits and some are more complete then others
@CRAWLTV Ай бұрын
Great insight! Thank you!
@ralphcasados8862 Ай бұрын
Recommendation like you said order all the aftermarket body stuff you can buy instead of trying to restore it.
@CRAWLTV Ай бұрын
I’m going to be making some very small patch panels here and there but for the most part we’ll be getting factory panels to stitch in
@ralphcasados8862 Ай бұрын
I had a 76 Bronco and I know your pain, on the bright side you will love it when it's done.
@CRAWLTV Ай бұрын
Steph already loves it so much! She’s pushing me to work on this, so it’ll get done. I can’t wait to see it out on the road again!
@benjamincolwell7569 Ай бұрын
Weird, there was no Coors in it. Step it up JC.
@CRAWLTV Ай бұрын
BEN COLWELL, COME DRINK 100 OF THEM WITH ME THEN!
@ericjohansen6042 Ай бұрын
Why the hate for the star on the hood?
@CRAWLTV Ай бұрын
I guess it just wasn’t his style 🤷♂️