Why am i picturing nick cage

The fishnet stockings for sure. Fantastic job wheeling. That's not easy to do.

Absolutely shocked on how well that little explorer does. Welding that front and rear diff would almost make that thing a very capable machine for what it is. Great video

Iowa, cool!

Every time those bolted thorn-turds show up it makes me laugh a little. I love that they do so well in some situations. lol

I’d say that you did a mighty fine job on fixing the tire for sure and saving thousands of dollars by not having to buy a new tire!! I do no that if you took the tire to any tire repair shop that they wouldn’t even touch the tire and go straight to well you no trying to stick it with out any lube!!! Lol!! I’ve worked at several different tire shops over the years and if I new I could fix a tire with out having any issues I’d definitely repair it but if I had any doubts of any issues that my repair wouldn’t work I wouldn’t do a fix on the tire!! I can honestly say that every tire I fixed I never had one come back because of my patch repair!! I did have a few come back and say that my patch didn’t work and come to find out that they just had ran over another nail and happen to get another hole in their tire!!! Lol!! And of course I’d always have to show them where I had fixed the tire the time before and where the new hole would be!!!

I’d have to say that the lighted nome won for sure!!! Lol!

Hey buddy I have the warm 9500ti winch and I bought it new from 4wheel parts back in the 90s and I was in high school!! I remember pulling out a couple state troopers when we had that really big snow storm and they had shut down the interstate!! I was working at the gas station on the west side of the interstate at New Virginia!! I also had pulled out a semi that got stuck on the north side of the gas station and I remember him saying when I asked him if he needed a little help he said with what I said with my truck and he laughed at me!! I then said well they are going to shut the interstate down and no one will be out for a couple days to be able to get you out!!! He then changed his mind nowing that if he called for a tow truck he would not get his safety bonus for the year!! I just had to pull on him twice and I was able to get him out!! After I had went back over to the gas station he showed back up after getting turned around and everything and gave me 250.00$ I said what is this for?? He said well you actually saved me from having to call a wrecker and not being able to get my safety bonus witch is way more than 250.00$ he said and he definitely appreciated it!! I still have that same winch today and I have not had to do anything to mine and it has sat on my car trailer for 20+ years outside witch I don’t like but the weather hasn’t fazed it at all!!

Oh man so Furiosa sucked I wanted to go see that. You got my subscription since you believe in freedom and due to that rig on your hip Sir. As I watched more of the video you recorded the “Kitty” with frost bitten ears. And it reminded me of a cat I have coming around my house. I feel bad for him but I can’t help him. I already have 2 cats technically I should only have 1 but the second cat I had told the original owner if she couldn’t take care of it to call me and I’ll assume responsibility. At any rate how do you mentally get past what these cats have to endure through out their lives. If people would just get them fixed to not make more this wouldn’t be a issue. My conscience just really eats at me when I see them.

That place looks like a blast im voting for the m&m thats definitely a odd find but i was torn on the fish nets lol

Good morning from Cape Cod ⛵ looks like you all had a blast. I'm impressed with the exploder, it did pretty well and didn't break. That bird protecting its eggs was funny as hell. Thanks for another awesome video Ron ✌️🇺🇲

Looked like a great day wheeling, little carnage, thanks for sharing, all the best to yous and your loved ones

Awesome vid. It’s got to be the fish net stocking, for sure. 👍

That looked like a lot of fun, thanks for sharing everyone.

The little killdeer was too funny !

You squirrels better have some nuts in your mouths!

That B&m shifter is one of the rarest shifters made

One of the best cleaning fluids I have tried is strait forward Gasoline, some soaps and degreasents attack the aluminium in carbs so its best to do a test if your not sure.

Enjoy the videos. Keep at it man. 👍

I got 93 f350 idi dually automatic.. $2.5 k

I got 93 f350 idi dually automatic.. $2.5k

I love the oil pan gas tank!

loved the tool on your hip... texas ... ?

Great stuff!! I once did exactly the same thing with the rear lugnuts on a car.....completely restored an old MGB and on the first trip it was doing the same.....both back wheels were damn near felling off. Live and learn......

I'm not familiar with the MT 90 oil that you put in the transmission but check the manual. I think you'll find that the ZF5 uses a thinner oil because of their inherent tight tolerances. Thanks for the video.

May of been a long one but it was very interesting 🤔 as well. Thanks for sharing 😊.

IT appears that the truck has a ' trailer tow package ' because of the one ton springs, overload helper leafs. and a rear sway bar. my also account for the 4 : 10 gear!

good am, how do you mount that pump on the front of the engine?

i had a lot of health problems have lasted couple years but am back working some but really enjoy and glad i found your channel plain and simple to the point hope you never change your approach to you tube

many years ago mid 1970's i gave $650.00 for the Snapon Ball Joint remover kit its so odd present day mostly use my Harbor Freight ball joint tool much easier to use. good thing about it though the adapters will interchange. will have to admit the Snapon is a much heaver duty tool but never found joints the Harbor Freight tool doesn't work just fine

I like the long format videos too. That mint green wheel bearing grease, I've not seen that before. What was it?

Happy to see a new Misfit Toys Video!! Very Underrated Channel IMO!!

Maybe its because its a chevy but when i cut the bed bolts off the old 78 k10 they did the same thing with the punch but didn’t hang up the bed could be because there was hardly any rails left as well

As always, I love to see how u make old junk great again 😊

Like your mom! 😂

I got a 1996 f150 4.9l and it’s runs great when cold you can fire it up in the morning and drive it anywhere but as soon as you shut it off and go to restart it she fights it’ll fire off but surges and shakes the whole truck you gotta give it gas to calm it then it runs fine

Loved the video, the longer the better. Looking forward to the next one 👍

Heck ya, make a video on that tire repair would love to see how it turns out. 👍

You deserve way more views then you are getting, I know you don’t full time KZfaq but you should promote your channel a little more, love the vids.

I very much enjoyed the longer video it was an awesome video good job Ron!

Good morning from Cape Cod ⛵ don't apologize for the long video, it was very cool to see that F-250 just sitting there as a pile of junk turn into a viable tow rig. That could have been ugly with those loose lug nuts, yeah s*** happens. Thanks for an awesome video Ron, man keep up the great work 👍✌️🇺🇲

I like how casually you problem solve

Either fill the radiator with white vinegar and run it until it's hot flush with water and it should be completely clean or get toilet boil cleaner with rust remover from the dollar store 4 bottles and the rest water and do the same thing run it get it hot drain it it will definitely be cleaned after the toilet cleaner

Cool what a revival, so much content, great presentation of perseverance good job (yea those settle reminders check the lug nuts) - Priceless. Total enjoyed the front end alignment my dad taught a similar method but need another body to hold the tape measure. LOL

Thats called a spout connector...the egr can be the source of pinging, btw. Does it have a cable speedo ?..if so pull the cable out of the sleeve and grease it.

Good video!! And good editing!! I know it took a long time to make it but it was very good!!

We had an 87 f350 2wd 460 with a 4 speed it was a good truck it had an RV engine that only had 40,000 miles on it The truck towed a 19,000 pound mini excavator or a 25 foot dump trailer no problem until it lost oil pressure. Cold it only had like 7 psi and once it warmed up it went to zero and the lifters started tapping

146k ain’t bad at all, I had a 97 F-350 single wheel 4x4 460 5 speed that the odometer quit at 352k. Spent most of its life plowing mud through pastures and pulling a triple axle stock trailer. Its ultimate demise was when the seat broke through the floor because it was rusted out and became too scary to drive 😂 460’s are tough. It might not have got the fuel mileage, but it would out pull the 7.3’s of the day, and start easily in the cold.

The Mel is like a 409 Chevy the top of the bore is part of the Combustion chamber! That was the down fall of the Mel Engine.

I always thought the 1968 Edsel looked ugly and Expensive, the 1959 Edsel looked Ugly and real cheap. They were a car that you loved them, or you hated them.