Vw spark plugs replacement.
1:30
Пікірлер
@coolvinay
@coolvinay 21 сағат бұрын
does the mechatronic breather cap just come off? For me its stuck.
@mbl-randomdiy6024
@mbl-randomdiy6024 20 сағат бұрын
Yup, but it's easier to refill using the filler port, just need to remove the starter motor to access it.
@coolvinay
@coolvinay 19 сағат бұрын
@@mbl-randomdiy6024 Thanks, I will try pulling the cap again tomorrow. For some reason it just doesnt budge. I just need to top up a bit till I get to take it to the service.
@bozotalic1585
@bozotalic1585 Күн бұрын
??
@Henry-es4wq
@Henry-es4wq 2 күн бұрын
This works for Volvo C30 2009 R-Design 1.6L Petrol. Crazy how I couldn't find a video exactly for Volvo, but it took me 5 minutes for Ford...
@michaelbarnes6901
@michaelbarnes6901 5 күн бұрын
Well done guys an yav just put me off doing it myself 😂👍
@josealbertiangulo4634
@josealbertiangulo4634 6 күн бұрын
Well, change the oil in the recommended intervals maybe?
@mbl-randomdiy6024
@mbl-randomdiy6024 6 күн бұрын
@josealbertiangulo4634 maybe, but this has complete service history. This is a common issue on this engine with wet type timing belt. I would recommend cleaning turbocharger oil feed every 20k miles.
@coolvinay
@coolvinay 7 күн бұрын
is the 7 speed gearbox on the skoda superb mk2 118 TSi a DQ 200? If yes are all DQ200 require the same amount of oil? Or will it be different if its mounted on different vehicles? Thanks.
@LaLoses
@LaLoses 8 күн бұрын
And the filter?
@mbl-randomdiy6024
@mbl-randomdiy6024 8 күн бұрын
@LaLoses this dq200 dry clutch doesn't have a filter, the dq250 wet clutch has a filter.
@LaLoses
@LaLoses 7 күн бұрын
@@mbl-randomdiy6024 😳🙃 I thought every transmission had one. Thanks for your reply. Now I feel more urgent to change the oil if it doesn't have a filter 😅
@Xandro_B20
@Xandro_B20 9 күн бұрын
Same sa ford ecoboom engine😂
@alexandruchivu7327
@alexandruchivu7327 11 күн бұрын
Foarte bun, bravo ! Poate ajuta pe cineva, daca nu ai presa de cilindru, nu da jos etrierul ci impinge la loc cilindrul fortand placuta interioara din partea de langa disc cu o surubelnita pana se impinge in totalitate cilindrul, eu asa fac si merge f bine. Folositi la montaj cheie dinamometrica (este foarte important), date Renault: - Suruburile disc fata / T40 --> strangere 14 NM - Suruburi colonete (glisor) / T45 / Allen 7 --> stangere 27NM - Suruburi suporti etrieri / Tubulara 18 --> strangere 105NM Prezoanele fata/spate se strang cu 105NM
@solaron99
@solaron99 12 күн бұрын
Wow!! Now thats a nasty carbon buildup throttle body! Excellent removal and cleaning procedure! Thanks for posting, I will definitely clean my 2009 Tiguan throttle body too!!
@stralisiveco7553
@stralisiveco7553 14 күн бұрын
Bonjour .est-ce que valable pour la touran 2.0 150 2018
@mbl-randomdiy6024
@mbl-randomdiy6024 12 күн бұрын
@stralisiveco7553 Yes, same as 2.0 tdi.
@serialvapist9894
@serialvapist9894 17 күн бұрын
Thanks brother
@mbl-randomdiy6024
@mbl-randomdiy6024 17 күн бұрын
@serialvapist9894 welcome, happy to help.
@dianacapurina8501
@dianacapurina8501 18 күн бұрын
why so stupid location of battery, was enough space to put on front and all wires back.
@RJManeri1
@RJManeri1 24 күн бұрын
Dealership states i have a leak from oil seperator and it will cost $800.I have no oil drips on driveway.I call BS and told them no!
@davidcpfc5342
@davidcpfc5342 24 күн бұрын
Excellent video. Thank you 😊
@ALDC.ON.TOP.FOREVER
@ALDC.ON.TOP.FOREVER 27 күн бұрын
IT WAS SO FREAKING FUN GUYS OMG
@user-ts1uo8tn7e
@user-ts1uo8tn7e Ай бұрын
Понятно и доступно , спасибо.
@mbl-randomdiy6024
@mbl-randomdiy6024 Ай бұрын
приветствовать
@alexandergros6708
@alexandergros6708 Ай бұрын
Superb video, please what is the size of the bolts retaining the EPB motor (the ones using T30 slim) ? Thanks !
@mbl-randomdiy6024
@mbl-randomdiy6024 Ай бұрын
Yip, t30 slim, as the screws close to the epb motor.
@alexandergros6708
@alexandergros6708 Ай бұрын
@@mbl-randomdiy6024 Thank you but I meant the size like M6-1.25-30 or so :)
@mbl-randomdiy6024
@mbl-randomdiy6024 Ай бұрын
I think it's M6x1x25.
@Pr3sarioVSU
@Pr3sarioVSU Ай бұрын
Thank you. Much easier with all the panels off as per the second part of the video. Thanks for the guide.
@sultanal-binali6655
@sultanal-binali6655 Ай бұрын
Thank you
@edmilson303
@edmilson303 Ай бұрын
Thank you very much for this video
@mbl-randomdiy6024
@mbl-randomdiy6024 Ай бұрын
I'm glad it helped
@toyotoe3732
@toyotoe3732 Ай бұрын
Excellent video. Thanks for taking the time to make. Shock absorber didn't appear to be leaking. Did knocking noise go away after replacing?
@mbl-randomdiy6024
@mbl-randomdiy6024 Ай бұрын
Thanks Yup, it was the shock absorber making noise, gone after replacing.
@supabe45
@supabe45 Ай бұрын
Awesome video thank you for much better details and demonstration on removing and reinstalling the EGR and throttle body
@mbl-randomdiy6024
@mbl-randomdiy6024 Ай бұрын
Glad it helped.
@jasonotoole7761
@jasonotoole7761 Ай бұрын
U need lessons to be quicker u cuda fit an open end spanner for start for third bolt will fit under
@kawazx10rx
@kawazx10rx Ай бұрын
Thank you for the professional exchange show which includes a full description. This is what every website should look like.
@mbl-randomdiy6024
@mbl-randomdiy6024 Ай бұрын
Thanks
@johnnybonnetier3967
@johnnybonnetier3967 Ай бұрын
what cleaner was used? Brake cleaner? I have oil in my expansion tank
@mbl-randomdiy6024
@mbl-randomdiy6024 Ай бұрын
Yup, and degreaser. Cleaned the expansion tank with hot water and dishwasher pods. After installing new gasket there will be oil still in the cooling system, you will notice it in coolant tank, you might need to clean expansion tank twice after.
@zabihullahghorbani5851
@zabihullahghorbani5851 Ай бұрын
❤❤❤❤❤❤❤❤❤❤❤
@andrewsalter4093
@andrewsalter4093 Ай бұрын
What colour is this called lovely colour
@mbl-randomdiy6024
@mbl-randomdiy6024 Ай бұрын
Silver Copse by Cuprinol
@bobr9731
@bobr9731 Ай бұрын
Thank you. Will do mine soon
@MrAndy1103
@MrAndy1103 Ай бұрын
very good job Pro.
@fr4nk15c4
@fr4nk15c4 Ай бұрын
Just done my gearbox. Thank you, kind sir ❤
@andreasmalmqvist3087
@andreasmalmqvist3087 Ай бұрын
Great guide, i dont conpliment many videos, but this was great!
@OldManGripStrength
@OldManGripStrength 2 ай бұрын
When winding the piston back in the caliper, should the brake hose be clamped or bleed nipple be opened? I've never done it when changing my rear pads but have had somebody tell me that the hose should be clamped to avoid damage to the servo when winding the pistons back.
@MartinJindra
@MartinJindra 2 ай бұрын
No 200nm!
@MrSima012
@MrSima012 2 ай бұрын
Which kind of gearbox is on VW Golf 1.4 tsi 103kw/140hp from 2014. ???
@mbl-randomdiy6024
@mbl-randomdiy6024 2 ай бұрын
Done a 1.4 tsi 2012, they're same gearbox, dry clutch.
@MrSima012
@MrSima012 2 ай бұрын
@@mbl-randomdiy6024 DQ200??? Is it difference between 100/140/150/231 horsepower???
@wilcobijl9451
@wilcobijl9451 22 күн бұрын
​@@MrSima012no difference
@MrSima012
@MrSima012 22 күн бұрын
@@wilcobijl9451 Tnx bro. Wat I can buy for service?? Oil and what more?
@Xandro_B20
@Xandro_B20 2 ай бұрын
Ilang % ang default?
@mbl-randomdiy6024
@mbl-randomdiy6024 2 ай бұрын
100
@ShAzEbMuGhAl
@ShAzEbMuGhAl 2 ай бұрын
Hi what is the engine mount bracket torque please when we screwing it back ? Reply will be appreciated 😊
@SGThirkell
@SGThirkell 2 ай бұрын
Thank you for so much information. This is a massive help to me.
@mohamedsiadabdille7631
@mohamedsiadabdille7631 2 ай бұрын
Hi! I did watch your video and really like how diagnostic Citroen C4 I had one 2016 had few fault and I will like to look at it and I am sure you can fix it almost same this one of video can you please give a contact thanks
@nabilroua2073
@nabilroua2073 2 ай бұрын
Merci, t'es un bon !!!
@BT-lm4fd
@BT-lm4fd 2 ай бұрын
Cheers 👏🏻👏🏻👏🏻
@antolpg5082
@antolpg5082 2 ай бұрын
filter solat captiva th 2008 posisi dimana ya om,,saya cari di kolong kok gak ada
@jifcks4320
@jifcks4320 2 ай бұрын
Did you put rtv sil in the gasket sir o not necesary?
@mbl-randomdiy6024
@mbl-randomdiy6024 2 ай бұрын
Nope, just on the part where the front chain cover and cylinder head meets @1:53
@user-bn4eu8lw6u
@user-bn4eu8lw6u 3 ай бұрын
Just done this thanks for the video the front nut on the cradle is a real pain to access because of plastic trim near the bumper and had to use a crowbar to leaver the cradle away from the wishbone bolt. Took 3 times the time it should take on a normal car.
@IBANEZfil
@IBANEZfil 3 ай бұрын
Great video. Just wondering why you changed the mechatronic fluid? Was the car having shifting problems?
@mbl-randomdiy6024
@mbl-randomdiy6024 3 ай бұрын
Nope, just changed it before it gets a problem for a 100k+ miles
@andrewnormore7093
@andrewnormore7093 3 ай бұрын
Thank you! This helped my with my 2006 Mitsubishi Eclipse 2.4 Standard .
@andrewnormore7093
@andrewnormore7093 2 ай бұрын
BRO I DID IT -- holy crap! Thx!
@Elconbrioso
@Elconbrioso 3 ай бұрын
Watching in London, UK . Thanks for taking the time and effort over your vid. I've done a few earlier Touran rear pads - it's a little more complicated with the EPB. Only had my T5 Touran a month or so and I'm still getting my head around the difference between the EPB and the Auto hold function . I'm not sure about using both at the same time . Do both these use the same actuator/gearbox that pushes on the pad ? I'm inclined ( from the wear point of view) to use the ECB only.
@kevininkster5834
@kevininkster5834 3 ай бұрын
Excellent video and the on screen notes are a huge bonus, thank you
@juicyjews4iife636
@juicyjews4iife636 3 ай бұрын
Thank you for the helpful video
@user-wf8ny6zw2k
@user-wf8ny6zw2k 3 ай бұрын
I am that girl on the violin I can't belive I am famous 😅