i have an abnormal issue with my rainbird valve and hoping it's something easy instead of having to replace the entire valve i open the valve solenoid lever manually, no water i loosen the blowoff valve, water spits out until retightened i loosen the solenoid a lot (unscrewing it), water leaks until retightened pressure valve is almost fully loosened but sprinkler still doesn't turn on could there be a clog or just the valve itself is bad?
@garyssprinklerrepair9 сағат бұрын
@@rawrtravisrawr if you remove the top of the valve. (Water off obviously) Then remove the diaphragm, you will notice the plastic yellow or white pieces are missing. Replace the diaphragm, reassemble, turn the water back on. Should be problem solved. Let me know if you need more help, and don’t forget to Subscribe to our Channel it helps us out too.✌️
@JeremyChevallierКүн бұрын
Awesome video thank you so much. Is there a way to tell which color wire goes to which zone in the irrigation controller?
@panchovilla72352 күн бұрын
Hi, l have a bet with my grandson, he thinks the word “sprinkles” is the same as “sprinklers” please tell him he is wrong. Thank you
@garyssprinklerrepair2 күн бұрын
@@panchovilla7235 don’t worry my son and his friend thought they were geniuses when they were little. So, they were going to take a genius test online to prove it. I looked at them and said, spell genius? They said, hold on let me look that up. I told them they can skip the genius test. 😂 Sprinkler
@panchovilla7235Күн бұрын
@@garyssprinklerrepair Thank you!
@initiativeplaytherapy884 күн бұрын
Thank you for this video. Not only did you save me from having to cut off all my valves, you made some comments about debris in the system that helped me understand why my system needed some maintenance in the first place.
@claudialang46984 күн бұрын
Thank you for posting this and giving such an easy to follow set of instructions! I was able to get my mom's system working again because of you!
@getsmartpaul7 күн бұрын
Good video 😊
@garyssprinklerrepair5 күн бұрын
Thank you Paul, hope you Subscribed to our Channel to get all the new content.
@rogerhodges76568 күн бұрын
Thank you!
@garyssprinklerrepair5 күн бұрын
More than welcome Roger, don’t forget to Subscribe to our Channel for more great content.✌️
@johnpcurtiss9 күн бұрын
Turn the switch to current date time. Hour is flashing. Press the arrow button. It skips over both minutes and am/pm, and instead a calendar icon below the hour starts flashing. No amount of arrow pressing gets the minutes or am/pm to start flashing.
@garyssprinklerrepair5 күн бұрын
Time for a new timer
@CantThinkofOn310 күн бұрын
I was able to troubleshoot a wiring issue by watching your video. Thank you!
@garyssprinklerrepair5 күн бұрын
Ya not so intimidating, once you see how easy it is, right? Hey, don’t forget to Subscribe it really helps us too.
@Joe-zj5dt11 күн бұрын
THANKS Gary! 👍 We have built-in water spigots by all yard shrubs/trees here in HOT Nevada and the home we bought has this old model. Your video helped me sort out the issues.
@garyssprinklerrepair5 күн бұрын
Always happy to hear the videos still helping. Hope you remembered to take a minute to Subscribe to our Channel.👍
@ajshah274812 күн бұрын
Thank you. Very helpful and to the point.
@garyssprinklerrepair12 күн бұрын
@@ajshah2748 You’re welcome, don’t forget to take a minute to Subscribe to our Channel✌️
@minarostam532113 күн бұрын
Hi there,since the power was shutdown,my system is not working.the lights is on but not running😏
@garyssprinklerrepair13 күн бұрын
Unplug the timer and plug a drill or blow dryer (ohm meter) into the outlet. That way you’ll know if you have actual power there. The battery will create a display but doesn’t have the power to run the zones. Hope that helps, be sure to take a minute to Subscribe to our Channel for more info.
@barinbutler624714 күн бұрын
I'm still having problems
@garyssprinklerrepair14 күн бұрын
Would you like to ask a question?
@ravenironwing15 күн бұрын
This was super helpful. Thanks!
@garyssprinklerrepair15 күн бұрын
You’re very welcome, thank you for taking the time to leave a message. Don’t forget to take a minute to Subscribe to our Channel. It will bookmark us for the future.😁
@RyanMayorquin15 күн бұрын
Does one station run at a time? Or do all run at the same time?
@garyssprinklerrepair15 күн бұрын
One at a time….hope that helped. Don’t forget to Subscribe for more great tips.✌️
@kab718415 күн бұрын
Thank you for this!!! Appreciate the detailed video explaining each.
@garyssprinklerrepair15 күн бұрын
Always a pleasure to help out. Be sure to Subscribe to our Channel for more great content.👊
@tuanluong733816 күн бұрын
It's great information....Thank you so much, sir!
@bbqjones16 күн бұрын
I've got this controller and have 3 Stations set up. All of a sudden station 3 won't run. The other 2 run fine. The display and everything seems fine. I've tried it through Semi-Auto and Manual What would should I look for to see what might be wrong? Thanks!
@garyssprinklerrepair15 күн бұрын
Double check you’ve programmed a run time for zone 3 in the correct program. If that doesn’t work it’s either a wire issue or solenoid issue. Let me know if you need more help, don’t forget to Subscribe and tap notifications so you’ll know I answered you.
@bbqjones15 күн бұрын
@garyssprinklerrepair I think it might have been a solenoid issue. I messed with the wires a bit and it started working. Thank you!
@garyssprinklerrepair15 күн бұрын
@@bbqjones cool, double check all the wire nuts are tight. Irritrol valves had an issue a few years ago with the wires shorting at the top of the solenoids. (Lawn Genie) homeowner version made by the same Co.
@felipegaray325517 күн бұрын
👍
@parishumphries914417 күн бұрын
Thank you so much for this video! After watching it it allowed me to figure out how to add back two stations on schedule A that i accidentally deleted/removed (they didnt have the A under them and i couldnt figure it out for life of me!
@garyssprinklerrepair17 күн бұрын
Glad it helped you get the zones back, hope you remember to Subscribe to our Channel it really helps us grow.😁
@itsatrujillothing274218 күн бұрын
Thank you makes perfect sense
@allenhumphrey697019 күн бұрын
how do I run the "A" program twice daily, 10 hours apart?
@garyssprinklerrepair19 күн бұрын
@@allenhumphrey6970 turn the dial to start time, next push the right arrow it should show 2-A with no start time…add your desired start time using the up arrow and push enter. Return the dial to Auto…..done. Don’t forget to Subscribe to our Channel it helps us a lot.👍
@oliversnodgrass809722 күн бұрын
For some reason my manual program cycle will not work? Pretty simple directions but I think my enter button (swoosh) is not working
@garyssprinklerrepair18 күн бұрын
Very possible, this is a pretty old timer. Are you remembering to turn the dial back to auto/ run position after doing the manual program?
@oliversnodgrass809718 күн бұрын
@@garyssprinklerrepair yes
@garyssprinklerrepair15 күн бұрын
Possibly time for a newer controller. Try the Hunter x-2 I’m sure you’ll like it. Be sure to subscribe to our Channel. Btw I have a video of the X-2 there, if you want to take a look 1st.
@E_redd24 күн бұрын
I watch this video at least twice a year. Please don't delete it!
@garyssprinklerrepair24 күн бұрын
😁 You’re safe, it’s here to stay.👍
@pkmathome150028 күн бұрын
Yes! I need to rewire a valve & guess whoo!!! My buddy gary
@lynnwestfall307829 күн бұрын
Slick !!! Thank you for the tips 😎
@garyssprinklerrepair27 күн бұрын
You’re welcome Lynn, hope you remembered to Subscribe to our Channel. It helps us grow.
@guyfisher314429 күн бұрын
Does it automatically switch between a and b?
@garyssprinklerrepair29 күн бұрын
Yes it does, when it’s finished with the A program it will check to see if you’ve programmed anything in B program. Hope that helped, be sure to Subscribe to our Channel it really helps us grow.👊
@sheedboss820Ай бұрын
Hello, this system came with my house, I ran the system manually by clicking random buttons and now it does not turn off even when I see the dial at the bottom to off. Would you be able to assist me with this problem.
@garyssprinklerrepairАй бұрын
You have a bad valve, hope that helps
@sheedboss820Ай бұрын
Hello I have this system inside the house I purchased I was pressing buttons to figure out if this works. I turned on the sprinkler heads using this but now they never turn off. Would you be able to assist me? I turned the bottom middle switch to off but that seems to not work.
@SeaofjitsuАй бұрын
This really helped ty 🎉
@garyssprinklerrepairАй бұрын
Awesome, don’t forget to Subscribe to our channel for more great content.👍
@ParaWaferАй бұрын
Thank you so much for a very good overview and lots of insight on this system. Had trouble with trying to figure out how to make this system match our new water schedule imposed by the city I live in. And you made it very easy to get it to where it needs to be. Thank you!
@garyssprinklerrepairАй бұрын
Glad to be of assistance, hope you took a minute to Subscribe to my Channel. I have a lot of other content. Happy Fathers Day
@adrianalaurabaez6357Ай бұрын
Can you run A and B at the same time?
@garyssprinklerrepairАй бұрын
No
@adrianalaurabaez6357Ай бұрын
Can you run A and B at the same time?
@scottgould804Ай бұрын
Thanks Gary that was very informative
@garyssprinklerrepairАй бұрын
Thank you, take a minute to Subscribe to our channel it really helps us to grow.👍
@darrondaniel3844Ай бұрын
Hi thanks for your help. New homeowner here. Just got my irrigation system fixed. As I was following the video I was messing with the different programs and switched my system to run a B program. I’m having a hard time returning it back to running the A program. Can you assist me where the dial should be to return the preset B program to my A program?
@darrondaniel3844Ай бұрын
When I’m on “System On” at the top of the screen it’s running Program B and I would like to get it back to running program A.
@garyssprinklerrepairАй бұрын
Turn the dial to start time and then push the A, B program button until you see A. Return the dial to Run, you’re done. Hope that helps, don’t forget to Subscribe.👍
@taz9221Ай бұрын
Wonderful! Thanks.
@garyssprinklerrepairАй бұрын
Thank Taz, appreciate the positivity. Hope you took a minute to Subscribe to our channel, we have a lot more content.👍
@kthissen94Ай бұрын
Thank you sir, got my system all set up now
@garyssprinklerrepairАй бұрын
Super happy to hear the good news. We have a lot more content on our channel so, be sure to Subscribe.😁
@andrewbradice8916Ай бұрын
Thank You it was very helpful
@garyssprinklerrepairАй бұрын
You’re more than welcome, don’t forget to Subscribe to our Channel for more content. 👍
@jesselw1017Ай бұрын
I have the same controller and I followed this video for easy programming. I notice the automatic setting isn't working. Is there a reason for that?
@garyssprinklerrepairАй бұрын
Make sure the station are programmed in the A or B program and the selector switch below them is in the correct location A…..B…or both. Be sure to set a start time for that program and chose your watering day you want “On.”Then put into Auto
@garyssprinklerrepairАй бұрын
Let me know if you still have questions. Don’t forget to Subscribe ✌️
@rudymaldonado5240Ай бұрын
Exactly what I needed thanks
@garyssprinklerrepairАй бұрын
Glad it helped out Rudy, don’t forget to Subscribe to our Channel we have lots of other content.👍
@el_peluqer0Ай бұрын
2024 and still find this video helpful straight to the point ! 🙌🏼
@garyssprinklerrepairАй бұрын
Great to see a regular to my Channel still coming back. Much appreciated my friend.👊
@stoneaged5064Ай бұрын
What if you open the cap and theres no water at all? I changed out the solenoids and used the main controller to send power to the solenoid and i can hear the electricitiy vibrating or buzzing a bit but there is no water flow? Where should i check?
@garyssprinklerrepairАй бұрын
Have you double checked to see if the water to all of the valves is “on”? You can verify that but manually turning on the valve from the small bleed screw on top of the valve. Let me know if you still have questions. Please take a minute to Subscribe to our Channel we have lots more content.👍
@TimmyjkelleyАй бұрын
Where is the am and pm? You blew right past that one. I'm not stupid but I can be a little slow on the uptake
@garyssprinklerrepairАй бұрын
When you scroll the time past midnight it will change the pm to am automatically.
@checkedcabbage2462Ай бұрын
Interesting!
@alfredocardwood2775Ай бұрын
3:15 Your easy to understand installation instructions made it easy to install and saved me $160!!! Thank you!
@garyssprinklerrepairАй бұрын
Wow, glad I saved you some money. Always good when you can do that. Hope you remembered to Subscribe to our Channel ✌️
@alfredocardwood2775Ай бұрын
Done!
@garyssprinklerrepairАй бұрын
@alfredocardwood2775 Great work👏
@kaycook1851Ай бұрын
Thank you! My lawn guy didn't show up, so I had to teach myself to program. Couldn't do it without you!
@garyssprinklerrepairАй бұрын
Fantastic!, don’t forget to take a minute to Subscribe to be notified as about our new content.👏
@wendolyncooper4590Ай бұрын
Thank you so much! So helpful!!
@garyssprinklerrepairАй бұрын
You are so welcome! Don’t forget to Subscribe 👍
@ChrissyMommaАй бұрын
Nice Sprinkler sir i need that here in the Philippines 😊😅
@FoodForestPermacultureАй бұрын
Cheers fellow earthling Gary
@Bud_NJSCАй бұрын
Very helpful video, thank you. This method will surely save a lot of work I was getting ready to use your method to repair a valve for one zone (zone #3) that continually leaks from a sprinkler head when the system is off. To find out which valve was for which zone, I manually turned the solenoid on for each of the 3 valves. The problem is, zone #1 now won't turn off. I returned the solenoid back to the off position, but the sprinklers still run for that zone, so I had to turn off the water supply. I removed the solenoid and put it back on, but it still just runs Any ideas as to what the problem could be? Should I just replace that one as well?
@garyssprinklerrepairАй бұрын
Thanks Bud, most likely the O-ring on the solenoid is either torn or stretched some. I would just swap the top on that one too. Be forewarned when turning the water back on sometimes if using a Irritrol (or Lawn Genie) they will pop their diaphragms out if the waters turned on too fast. Not the case with Rainbird. Double check that the manual bleed screw is also closed. Hope you take a minute to Subscribe. 👍