Need help deciding between this and the creality k1c
@Kattlolz2 күн бұрын
Hello I know a really cool 3d printed bearded dragon but I can’t find the link for it.
@Kattlolz2 күн бұрын
Nice!
@PriyankaSingh-xp9le3 күн бұрын
Whale
@CJBintheHouse6 күн бұрын
Currently pissing. This is important for you to know
@Everybody_playzrealyt8 күн бұрын
Shout out to dr disrespect is crazy
@Everybody_playzrealyt8 күн бұрын
I had this but the filament clogged mid print so it had half a head
@Everybody_playzrealyt8 күн бұрын
I have a mini one
@ProfoundisGod14 күн бұрын
amayzing❤❤❤
@ProfoundisGod14 күн бұрын
very good🎉❤❤❤❤❤
@ProfoundisGod14 күн бұрын
yes
@batataGamer68016 күн бұрын
Nice work!
@SilvioBolso21 күн бұрын
What mark is that filament?
@l.cheffe300221 күн бұрын
I have the dragon
@Sverige-tr2bb22 күн бұрын
Cccccc
@Sverige-tr2bb22 күн бұрын
Cc
@Sverige-tr2bb22 күн бұрын
Ä
@alexisedwards278422 күн бұрын
You saved the Best for last. Thanks.
@christophergutierrez965822 күн бұрын
Have the stl?
@CamilaRamirez-pc4gf24 күн бұрын
Flexi shark then: 🦷🦷🦷🦷🐟 Flexi shark after:🦈 Shark sayng:WHERES MY FISH VICTIM!? oh also wheres my friend scorpion?
@NutzinHutz3D26 күн бұрын
Nice models😀
@3DPrintKing26 күн бұрын
Oh yes! Designers keep getting better :-)
@CamilaRamirez-pc4gf29 күн бұрын
Flexi scorpion :has benn slain by an 3D printer and screamed by a human.
@3DPrintKing26 күн бұрын
Yes! :D
@C2L2FАй бұрын
If only it printed that fast 😅🐉
@3DPrintKing26 күн бұрын
Yes, that would be great :-D
@rodmanunderhilliii8198Ай бұрын
I just got mine 3 days ago. I went to auto level and the Z was high above the bed, when I set it to 'Home". Then, to higher the bed, since the z axis was at home, I loosened the knobs, to bring the bed up, and the knobs are about to fall off, and I am still to far from the nozzle, to do the manual leveling, with a piece of paper. How do you manually level the Aquila S3.
@followme8238Ай бұрын
So what exactly is the ‘dark secret’?
@danielhall9073Ай бұрын
Couldn't find the robotic eye stl anywhere, do you still have it?
@I-have_phonophobiaАй бұрын
I have a chaotic looking green and black gem dragon with poseable wings
@ibrahimkocaaliogluАй бұрын
I have it for a month and scap it already. Its nozzle clogs so often and it broke its expensive nozzle. Watch out of this product. 👎
@Feetek3DfilamentАй бұрын
Hello nice to meet you here
@amystrunk9677Ай бұрын
Gimme the monkey NOW!!
@JaxonAlegreАй бұрын
I just got one to day, not joking
@wilfredwulffАй бұрын
Why the purge tower on the dragon bottle holder?
@octogames6823Ай бұрын
I printed the large dice tower from titan forge, April catalog. That beast was printed with ridged resin, 75% with 3mm thick wall. The rest at 100% infill. Took about 4 kilos of resin to print. Wish we could share photos in comments.
@justinsane7832Ай бұрын
but you DO have a youtube channel ;) could make a short?
@octogames6823Ай бұрын
@@justinsane7832 yeah I do, I should have thought about that, lol. When I make things I do it for therapy so I don't think about making videos. I should start capturing my journey during some of my builds.
@atonement.Ай бұрын
Man this is so impressive, no supports!
@milanmilicevic4618Ай бұрын
The prints should be free. Dislike from me.
@KattlolzКүн бұрын
Have you ever thought about how long the product took for the design after maybe 2 or 1 tries that failed finally they made an articulated design and you don’t expect them to make it expensive?
@NutzinHutz3DАй бұрын
The Samurai is just amazing!
@jonmann6486Ай бұрын
When printing these dragons, do i need to use a brim or no brim.
@FunnyPlayzAdoptMeАй бұрын
Oh xd
@FunnyPlayzAdoptMeАй бұрын
Omg if you could make a 3d printed fleximals shop I would buy ALL OF THEM WITH MY MONEYY
@conans5283Ай бұрын
Can someone help me with understanding how long it takes to make the octopus? For example, the first pink one, 18:16 means 18 hours and 16min? Or 18min 16 seconds? Thanks in advance
@Catman.Ай бұрын
How do you make your 3d prints soo smooth on the enter 3?
@zerojackie3575Ай бұрын
Tiger and killer whale are my favorite
@juergenmeyer3362Ай бұрын
There exits no Slicer for this printer. If anyone see this video. Please don‘t buy it.
@ceweberАй бұрын
How did you do these timelapses on BBL A1? What triggers the camera?
why are the purge blocks on when printing 1 color?
@mackobun2 ай бұрын
I had the same question. And why do they continue to grow with the print when the multi-color prints are done swapping colors?
@skycaptainchiba2 ай бұрын
This is for the smooth timelapse
@lucasseagull82822 ай бұрын
Hi man, I would like to start 3D printing - can you please let me know which printer to buy? I would like to print the real-life Mandalorian helmet (300x + dimensions), but at the same time, I would like to print small, detailed models like this one. My budget is around $ 650. Thank you for your advice.
@cowabungacrypto2 ай бұрын
How do you do the multicolor Timelapse in the Bambu a1?