It’s great for my use. I have zero issues with adhesion and I don’t use the glue stick. Haven’t changed speeds either. Just buy good filament and have it on a very stable table. Have not made any changes to the default speeds with either flashprint or orca.
@802Garage6 ай бұрын
They just released Klipper firmware for it so that should help it compete going forward! The closed environment was one if its biggest knocks.
@chriss22953 ай бұрын
This is NOT true. What they posted is incomplete and outdated.
@802Garage3 ай бұрын
@@chriss2295 Yeah unfortunately it wasn't quite as simple as we would have hoped, though I do believe people have gotten stock Klipper up and running on it. I think since the Q1 Pro came out it makes a little more sense as a top pick, though it has a similar Klipper issue.
@SeanSR2 ай бұрын
who is "They"? Can you link please?
@thomasaugustine54826 ай бұрын
This is an amazing printer. you do have to follow procedures but if you do you will get awesome results
@KnoxGTX5 ай бұрын
Wipe tower. Layers need time to cool. More beneficial on smaller parts.
@benmarhefki7 ай бұрын
First time owning a 3d printer and I'm just learning..... Struggling with bed adhesion. I think it has something to do with the default speeds set by Flashprint and Orcaslicer. Slowing this thing down gives MUCH better prints.
@batuhanyazc11044 ай бұрын
Please wash plate soap water it will stick oil resudues with result of processing not be washed i have one after learned this bed adhhesion will be good i have no isssue right now
@suzyamerica46794 ай бұрын
From what I learned on another printer (Sovol SV07+) I just always put a little hairspray on the plate first (not while it's in the machine of course!) before printing, and sometimes heat-soak the head & bed before printing (TPU especially).
@doomaster42 ай бұрын
I used glue stick and it has held pretty good I haven’t had to add to my initial application after almost a month of printing. The glue that comes with the printer seems to be 1x per print and didn’t hold.
@kalicacao3 ай бұрын
This is one of the best printers you can buy at the moment in this price range. It has a lot of very smart design choices, good quality and well balanced feature set.
@thebigaverage-jordanspeck9045Ай бұрын
Need help deciding between this and the creality k1c
@heisenbug35425 ай бұрын
I'm completely new to 3d printing. Can you explain the purpose of the block near the printed model? you had it on every print
@TedLoganIsWrong4 ай бұрын
I think it's used to get the timelapse shot by taking a still photo each time the print head moves to the block and away from the model being printed..
@ExtremeRC132 ай бұрын
It’s called Wiping tower
@carloscalves5 ай бұрын
Use this machine with Orca Slicer 2. Avoid Flashprint
@Vabloath4 ай бұрын
I am new to 3D printing. Why is the firmware controversial? Is there a privacy problem?
@ExtremeRC132 ай бұрын
I had nothing but trouble with orca slicer flash print works amazing, but everyone has their own they like
@calboese6355Ай бұрын
Would you still suggest this software if I have years of experience with Flashprint? Since the first printer I really learned how to fine-tune on. I understand Ocra may be technically better in nature but would learning an unfamiliar software really have better printing results than something I'm used to (and know how to navigate it's quirks)?
@danikaflorence444Ай бұрын
@@Vabloathpeople are butthurt that a year ago you couldn’t side load klipper settings into the printer but flashforge changed that with the last several updates so it’s a moot point anyways.
@ibrahimkocaalioglu2 ай бұрын
I have it for a month and scap it already. Its nozzle clogs so often and it broke its expensive nozzle. Watch out of this product. 👎
@MrSirclint8 ай бұрын
It really doesn't. Nothing stacks to the x1 or p1s.
@hexesandheroes8 ай бұрын
P1S has an awful screen and both bamboo's send your files to China. Trade off's my friend.
@MrSirclint8 ай бұрын
@@hexesandheroes 1. The screen is fine. 2. That's total nonsense. 3. Who cares anyway? The printers do their job faster, better, and without the metric fuckton of tinkerfuck waste to setup. Replacement parts if needed are cheap and quick to get and don't ruin everything else when installed.
@3DPrintKing8 ай бұрын
This was written by a person who prints on...? I will mention only a few points. They are details, but for someone they can be fundamental things that change the overall view of the matter. 1. Flashforge can be quiet! 2. Ultra-quick replacement nozzles including hotend... 3. Faster and easier filament insertion. 4. More accurate placement of the printing pad. 5. Price... Compared to the P1P, it has an enclosure, internal circulation, a carbon filter and a large fan for cooling the overhangs for the same price.
@MrSirclint8 ай бұрын
@@3DPrintKing this is coming from someone who started on a flashforge and an ender clone. Flashforge has probably the worst slicer and software support in the game. And sure it's cheaper than a P1P by 100-200 bucks. (get a K1 then) That printer and company has been left in the past just as far or farther behind than prusa and their absolute lunacy pricing.
@pumpyronaldrump_44178 ай бұрын
@@MrSirclintfrom what I've been seeing, the K1 is a glass cannon. It seems it performs really well right up until it breaks itself.