Is there a maximun thickness the panel can be to use these?
@uvejssokoli462019 күн бұрын
Hi, i think my white metal thing that goes around the airbag is a bit bent/damaged and recently my steering wheel has more wiggle room and is more to the left, although car tires were aligned perfectly - could that come from that white metal? what can i do?
@richardheeth621826 күн бұрын
Well, the ladies say the bigger the nuts the better the grip.
@gilphroy28 күн бұрын
I wish there was a review of the VRS versus the Simagic Alpha
@aksit0720Ай бұрын
Do you have pdf for how can ı build etc.?
@YDe888Ай бұрын
Піздец 😂
@mentalhealthracingАй бұрын
So you moved the spacer that was behind the top washer to in front? And use the long nut touching the top washer? More preload? I’m going to try this but wanted to check. I just can’t get 100% comfortable with the VRS pedals :(. Left knee cartilage and strength issues I’m battling constantly. The pedals are amazing, but I just can’t get balance right for endurance races. Hot lap pace is good.
@savindamunasingha8001Ай бұрын
can i please know how to get the blueprint
@aksit0720Ай бұрын
Do you have blueprint?+
@w201carb2Ай бұрын
Genius! Thank you🙏
@Bondy0068Ай бұрын
Thanks mate 👍just what I need all the best 👌👍
@webnplay2 ай бұрын
Nice thanks for this. You can also use simple rings instead of the custom tool, same principle works well too.
@allanfranco44642 ай бұрын
TALK TO MUCH JUST SHOW HOW IT WORKS AND BASIC EXPLAINATION
@borri682 ай бұрын
You can also use it without the homemade tool. Just use a flat washer the same diameter as the nut head. This way you can easily see if it's seated flush all around as you're tightening it down. Plus this way you don't need to try to hold 3 things at once.
@user-gg2hh6qt8j2 ай бұрын
Thank you so much! You have made that so easy for, Topman! I’ve just subscribed 😊
@talasdaveable2 ай бұрын
Thanks, great explanation, I just shaved off 0.6 seconds in the first session right after watching this video. It seems like I wasn’t pushing my tyres enough. I was always scared of this “scrubbing” noise and thought it meant my tyres were sliding so I’d lost time. Now it’s much better. Thank you!
@esteregg60612 ай бұрын
I do oven cleaning and repairs. Have found rivet nuts useful where some of the screw mount holes for the back panels or element have corroded. One of the original videos I saw for seating rivet nuts was using a nut, bolt and washers to set the rivet nuts. Only problem I was having was that the rivet nut was sometimes rotating when trying to tighten. They have a grip profile on the side but rivet nuts but they dont always stop the nut rotating. Love this shaped piece of metal with the hole which will stop the nut rotating. Unfortunately I failed trying to seat 2 rivet nuts yesterday wasting over 1 hour, and spent out on a tool. Will make up a couple of these metal profiles at the weekend. Thanks for this brilliant tip Smoking Steel Garage.
@freakunit2 ай бұрын
What do you suggest if its a larger item thats to big to fit in a jug ?
@geovannips22 ай бұрын
Oua 👏👏👏👏 ✌️😎 Obrigado!!!
@jessmatthewson77752 ай бұрын
Thank you Sir😅
@donbrowse79803 ай бұрын
Thanks great tip, i use harpic 10 X toilet cleaner and its good, but that drain cleaner works faster, good video and great tip. Cheers. Don..
@Jursaw3 ай бұрын
I like this idea!
@sparkywalton3 ай бұрын
I noticed your braking is always around the 60-70% marker. Is this down to you and your feel of the brake, or have you set something in the software to be at max pressure 80% for instance? Cheers
@jasonbailey53113 ай бұрын
Awesome, best video, I was trying to work if I needed to push them in, pull up, push down, etc. I didn’t know about the 2 hex screws, legend. A++
@HeatherNeilson-Clayton3 ай бұрын
Does paint adhere after it is cleaned?
@CodyKlimaszewski4 ай бұрын
The first time I used these I pulled out the Fred’s several times, I finally switched to fine Fred
@Ewecnt4 ай бұрын
A thrust bearing would reduce the work required better than a brass washer as so many people suggest. Even better, spend a few quid and buy the tool for the job 😂
@povlfalk-jensen44994 ай бұрын
Definitely going to try this. Thanks for sharing.
@audisportcarrasco4 ай бұрын
Nice
@Danittoman4 ай бұрын
How can i calibrate with diview software? I can´t. Help!!!!
@viking_2374 ай бұрын
This video was really helpful, as someone who is just starting his journey trying to DIY some things, I thank you :D
@tradward4 ай бұрын
I'll use this trick at work at least once a week from now on. Tired of downtime due to crappy, unreliable communal nutsert guns.
@user-fq5lx1hp7e5 ай бұрын
This is noted. Very helpful. Thanks.
@LarryMcDonald085 ай бұрын
What spotter is that?
@Strat.15 ай бұрын
Lowe’s has a little set up that you can use your drill for maybe less than $5 bucks. This is to much trouble. I picked up a Wetols nut tool several years ago for $ 26 still working great and a lot less hassle. Have faith in America.
@tobytoxd5 ай бұрын
Great review and observations! Thank you very much!
@njdigitalagency86196 ай бұрын
Too much talking but thank you
@garychaiken8086 ай бұрын
Great job. Thank you 😊
@NickCooper37 ай бұрын
Very late to the party but how have you got so much travel with the red spring, mine feel like they barely move, what do I need to do to get it to have that much travel? Thanks
@MasterCamus7 ай бұрын
Interested in this as well
@SmokingSteelGarage7 ай бұрын
Hi. Sorry for late reply. You need to adjust the adjuster I can't check the length I had as the pedals and all my gear are currently in a 40ft container 😞 If memory serves correct it might be 32mm from the locknut to locknut. But I can't be sure. However have a play with the adjuster bar, it makes a lot of difference. Take note of the length before you adjust and then try it set longer and shorter until you find a sweet spot you like. Hope that helps. Thanks for the message. And we will be back soon. Just moving country!
@MasterCamus7 ай бұрын
@@SmokingSteelGarage thanks mate
@NickCooper37 ай бұрын
@SmokingSteelGarage appreciate it, not sure on the length I went with but it's where I want it. Appreciate the reply 🙏
@briancolstock48448 ай бұрын
Need a setup for the stud rivets...
@josfielden86228 ай бұрын
Am building a kit plane. Thanks for this info plus comment about brass washers. Rivnuts very useful items where you can't get a spanner behind to do up or undo the nut that holds the bolt. Thus you can secure a piece of equipment such as an instrument to a sheet of metal and it is then very easy to take it off and put back when required for servicing etc.
@TheDoctor46vr8 ай бұрын
Did you redo the test?
@goingforagander18828 ай бұрын
Saved me $100-$200aud thanks legend
@thomas60638 ай бұрын
Im currently in the process of upgrading my headphones. I previously had the wireless USB/bluetooth "Stealth 600 Gen2's" (Turtle Beach). Just last week I purchased the DT770 Pro's (80ohm). According to my research, these are the best sounding studio quality headphones one can purchase in the $150-$200 price range. I had to buy an AMP to get adequate volume from them so I bought the EK10 DAC/AMP combo by FiiO to power them which made a huge difference. However, I swear that I'm hearing a decent amount of noise/distortion in iracing. Dialing down the engine sound in iracing does help but I'm still bothered by the but of distortion I can hear. My question is - Is this little bit of poppy distortion normal in iracing or should I choose a different pair of headphones rather than the Beyerdynamic DT770's? What are you running? I would greatly appreciate any feedback. Thank you!
@chanpeter69448 ай бұрын
Take to much time just to revert one hole?
@John_again_John8 ай бұрын
Man this thing is such a fast car. It even set multiple records for being the fastest production car around multiple tracks. How’d it handle from your experience?
@malgrif0919 ай бұрын
it looks like you were experiencing the limitations of elastomers, where you see the peak and then the drop off. Great to see the data that the VRS eliminates this, will definitely be getting the VRS pedals since i'm a bit fed up the same way you are about the annoying brake drop off.
@3Slippers9 ай бұрын
Subscribed when you described the differences coming off the VRS brake to the Sprints. Really helpful stuff, thanks.
@tobytoxd5 ай бұрын
Keep in mind, that the VRS software has much more improved in those 3 years, as from what i've heard in the Boosted Media revisit of their wheel base and read on Reddit.
@monkeyboy22979 ай бұрын
who's fred?
@melvis20179 ай бұрын
Thanks for the great job very simple and easy appreciations and thanks once again for saving me time 🙏👍🇩🇰