NeoGeo CD Pad Repair

Рет қаралды 3,253

Күн бұрын

Get this repair kit at Laser Bear Industries
www.laserbear.net/products/ne...
This repair kit contains the parts needed to replace all of the clicky buttons in your NeoGeo CD control pad.
The original buttons were a 9x9mm button that are no longer available for purchase, this kit replaces the top cover of the button mechanism with one that will support 6x6mm buttons that are readily available and should be easy to source down the road should the new buttons fail at some point.

Пікірлер: 22

@Ace_of_DiscaL 2 күн бұрын

Thank you Greg for the great mod! I had a tough time starting off, but everything flowed nicely thereafter! 🎉

@JaeliusFairmout Жыл бұрын

I just installed one of these kits I bought from you. working like a dream now on my MiSTer FPGA. I added a dab of lithium grease to the base of the dpad pivot just for its long-term preservation after confirming it wouldn't react with the plastics.

@stanhalikowski8192 2 жыл бұрын

I had my doubts, but still ordered these for all my neo geo pads. After the first one I was shocked at the absolute quality and amazing feel of this mod. Fantastic solution!

@Null_Experis 10 ай бұрын

I'm amazed someone hasn't already made replacement PCBs for these where they replaced the surface mount pads with through-hole mounts.

@mike7599 2 жыл бұрын

Just got my kit today. Can’t wait to try it out

@marissamontanye9088 2 жыл бұрын

Thanks! Just preordered. So glad someone has made a solution to this issue

@Charlie-Cat. 2 жыл бұрын

Amazing to see this from you Greg. This will benefit many in the community. I posted this up on the Neo-Geo thread for others to take notice and order on your shop page bro. Thank you for sharing this kind sir. 8^) Anthony..

@48859234 2 жыл бұрын

Ordered two, installed one : It works flawlessly. Thank you for this clever fixing solution 🤗

@jeffcooney7590 Жыл бұрын

finally got to install one of these in a busted controller, and i must say its phenomenal. will use this on all my future NGCD pad repairs

@GadgetUK164 2 жыл бұрын

Fantastic! I've ordered one of these kits from you just now =D

@kevinwoolford123 2 жыл бұрын

Mine turned up today dude but I'm moving house on the 4th so won't get a look in the at least two weeks. Let me know how it feels 😁

@hadesmcc 2 жыл бұрын

Thank you for this, I have 2 pads and one of them has a dodgy down switch, I'll try DeOxit first if that fails, at least I know there's now a fix for it. :)

@lordfyita2096 9 ай бұрын

How is that bridge in 1 of the 4 pads gonna prevent tearing all the others them apart?

@collingall1 9 ай бұрын

you would need to do the same to all 4 pads, it was a demonstration of how to deal with pads that are starting to get loose on the pcb or if there is fear that the pads will eventually tear up from the pcb. They are known to do that in some rare situations.

@JanvanRosmalen-lc2vm 3 ай бұрын

Wanted to order a couple of these but no paypal !

@LaserBearIndustries 3 ай бұрын

Sorry PayPal punishes sellers, especially with international sales. They had an internal glitch and held our funds hostage for months while they fixed it. We did nothing wrong they did not apologize or offer any quicker solution.

@JanvanRosmalen-lc2vm 3 ай бұрын

@@LaserBearIndustries Yes Paypal can sometimes be very unreasonable I understand, I was once in that situation myself :( still you`re missing a lot of customers since you do not use this option...

@GhibliNova 7 ай бұрын

The tolerances are too tight. I couldn't push the switches far enough back against the casing, so when I put the springs in, they are constantly pressed down, I did everything to try pushing it flush and broke the switch, now it still isn't flush and I can't take it out. So now I just wasted my money on something I feel was no fault of my own

@LaserBearIndustries 7 ай бұрын

It sounds like a defective print, if you reach out to our web contact sheet, or respond to your order email we can get you a replacement kit. Posting here about the problem is perfectly fine, but we are able to actually help when you contact us through the proper channels since we can't link a KZfaq profile to your actual order information.

@GhibliNova 7 ай бұрын

@@LaserBearIndustries thank you so much!

@GhibliNova 7 ай бұрын

@@LaserBearIndustries I did what you said right after I posted the last comment and haven't heard anything back. I got another one and it works but the springs don't push the lever back to center. Do I have ti lubricate the switches?