Thank you so much for this fantastic video! I was at a local gun shop recently where they had a Girsan MC 312 12ga 28" shotgun with black synthetic furniture for $250. Basically a boring Turkish clone of a Benelli M2. Great gun! Great price! I taped the trigger group, the recoil pad, the top of the rib and front bead, taped off the bolt, and the sight channel on top of the receiver off, then put a plug made of a ball of tape in the muzzle. Then I went to town on it. It turned out absolutely amazing! All of my hunting buddies were blowing away! I started with a a Khaki base coat. Then I went with random stripes of flat black and brick red. I went to Michael's and got 3 pack of natural sponges for $7. I cut them in 1/3rds, so you don't have to use the whole thing at once. For the sponge paint I use a dark earth tone brown and a kind of dark chocolate brown. Spray a puddle, and just dip the pieces of sponge in these and randomly dab it on your gun. It really looks awesome! I finished it off with 3 coats of matte clear. That stuff dries really fast in the summer. 15-20 minutes between coats! This gun went from, yawn boring, to a absolute 100% sexy show stopper! I'm not kidding! I plan on doing this to many guns in the future! It is a 100% no brainer! I love it! Thank you so much again for this great video! Anyone can do this with outstanding results. It's not that tough. I promise you!

Good stuff Walt

I’m using a Remington 700 ADl stainless steel 30-06 and 4x12x40 vortex tactical and $550 in total package 📦

The music junked another video 👎👎👎👎💩💩😬

How are you liking it? Im in the same boat and want to know if this should be my first 10mm

I use to live out by fort rock

I have this model and I love it, for the price I would put it against the more expensive brands out there. 10 mil rocks! It's too bad that most companies water it down. That the 10 mil reign supreme!

Great video,great guns and great to see the budget gun shoot as well as the big boys!!!

Way too much emphasis on the music and production "values" Takes away from the topic

Does this 10mm have a RAMPED barrel?

I have the same model savage and my groups really tighten up at .025 off of the lands. CCI 250 primers, 44.9 h4831 and 140 gr bullet.

where the shootin vidyo? :D

Those bullets retain enough energy to pierce a chest and puncture a captain thumper, at one mile range.

My savage axis is a 1/9 and I can shoot 75 amax and 75 bthp you got to be on the up end to get good groups but it's not bad

When are heading out next

Excellent camo job dude

I guess the fix is get a Winchester, haha! Thanks for this video. I just got back from the range with the lever of my Marlin 1894 stuck open. Its a 1980s but is new. Only 2 boxs of ammo through it. I’m super grateful for this video, and a set of gun smithing screwdrivers. Nothing I hate worse than scratching the receiver or deforming the screws

I put together a mild load with Herco powder and the 150 grain Lee bullet for about 1550 fps from my 20” ‘94. Very surprising accuracy and extremely mild report. Probably not any louder than a .22 WMR.

try taking the end of the Hornady plunger and filing it down to a rounded point then when it touches the base of the bullet the area it touches is much smaller and less room for variances. The bases of the bullets are not machined therefore not 100% 90deg. I found my variances for say 5 attempts are much smaller 😀

Hi, hope you guys are well. Im new in casting bullets but need to get more info on lead hardness. I have purchased a block of lead which I don't know the harness off. What can happen if I cast bullets with too soft lead on .308 . I want to quench with cast and powdercoat afterwards. Does this increase the strength enough of the bullet? Will a soft lead powder coated bullet be safe too shoot in 308? Thank you

Thank you for the response those are the colors I'm probably going to use then cuz I really like your project

What colors were used on this paint job

Awesome Brother 10mm rocks look forward to seeing some range time and load results

Woah two videos in as many weeks!!!❤❤❤❤❤

Good thing you went with regular brass from Starline.... I got a bunch of nickel plated from Capitol Cartridge and my 6" Hunter throws those shells like 10 feet. Not that it worked perfect out of the box even with match Nosler.... so the gun took some tuning from Wolff.... but its good now! 200 grainer FMJ/TMJ.

Glad to see you guy's putting out vids again.

Yep I use 7 in 10 and 460 Rowland. Very close to Longshot but I think Longshot is slightly better. I just don't have any. All my Rowland rounds are around 1300 fps except the 185 grain going 1600. But those XTPs are just toys at that speed. I have only 2 serious rounds. Coated 250 Acme hard cast (16 brinell... they rifle, are accurate, and are laser straight through water and leave no lead fouling). Which have to be resized. And also 240 XTP MAG hollow points which also have to be resized though... a special BRD die from Corbin swaging. Captured a couple..... they are gnarly! THICK jacket and hard cast lead core... but they hold together!

😮 that is NUTS-O-RAMA!!

Nice shooting!! But I don’t remember seeing my invite!! 😛

Nice work. Looks like a good time.

Third!!!🤣

Excellent range day

Hello Stranger! Happy New Year!!!❤❤

Great video, thanks. What are the dimensions of your steel target? Also that must be a previous model of the Bullseye camera, not the current SME-TGTCAM. Have you tested the latter and how does it compare to the one in this video?

Literally just watched to see if 1 spray can is enough for a base coat, but stayed for the rest of the video for the fkn sweet drums 👌

Thanks brother !

I would have first filed down and smoothed the damage. Worth a try.

Am I wrong or there is little to no difference between the smaller 6.5 Grendel and 7.62/6.8 Creed? That .338 though is a guy she tells you not to worrie about😂

Walter, did you readjust the eye relief on the cope after the new glasses? Also having done some of this I think some of those UFO shots would tighten up if you used a solid rifle rest rather than a bipod. Worth trying. Having consistent recoil behavior might help. One thing I also discovered is oddly the best load groups at 100yds might not shoot your tightest groups at 200 and beyond. You might try fine tuning loads at longe ranges like 200 or 300.

It's Bob not Patty 😂I have done this to a couple of my guns and other guys at deer camp started asking me to do their's but I never agreed to. I just told them how easy it is and a few did it. Nice video

Walt just not a good shot.

I carry 2 rifles on my ATV. A Mossberg MVP Predator in 7.62x51/308 and a Parker Hale #1200 300 Win Mag. I reload for both and only hunt moose where I live. Both rifles have never let me down and I have never wounded or lost a moose. Great video. Stay safe and happy shooting.

is there anywhere i can reach out for a chat curious to give this a go down here in australia i like the idea of casting my own rounds :) cheers!

Lol! For a second I thought he was shooting towards the truck. 😱

4yrs old and still an awesome video. Thank you guys.

is high velocity possible without GC?

.338 Lapua is just to hard to find and way to expensive!

Check out this video my Target Suite for a near similar problem with the Marlin 1895. kzfaq.info/get/bejne/pL2GiMSSmM-lk4E.html

😢you loose tracks of so many rifles being tested against each other.

I have been kicking myself for not getting the LAPUA when I got my SAKO TRG in 338 Winchester, hate the rimmed case but great shooter.