I do like your videos, however maybe a good idea to protect yourself with mask, eyewear and protect the customer's floor as well. Mold could be present, in all that flying off wood. Just my suggestion. Thanks for videos.
@ats688020 күн бұрын
I needed this. My bathroom frame has water damage from the toilet Bursting and wont close the door anymore 😅
@brebre358213 күн бұрын
Check for mold while you're at it. Happened to me and the mold made me extremely sick for many months. Had to get detoxed. Hopefully you have better result.
@youngmafi5609Ай бұрын
I always use corded sawzalls, the battery operated ones aint it
@cinders302Ай бұрын
I would have likes to listen and watch,but couldnt handle the audio. Sorry
@karens.90262 ай бұрын
You answered all of my questions with this video!!! Thank you😊😊😊
@richarddelossantos61544 ай бұрын
Fast removed in the door frame
@bexaminer15 ай бұрын
I have the same cabinets. I wish you had spent a little time on showing more detail as to how you adjust those hinges and fit the door properly. That's a real pain. I may just bite the bullet and go to the expense of getting those hidden hinges for doors with the 3/8" lip like I have.
@MatthewWatches6 ай бұрын
You brought the wrong tool, that's a SawsSome not a SawsAll 😂
@jeffchurney10107 ай бұрын
Very nice video. Exactly what I was looking for. Thank you.
@vladtheinhaler42277 ай бұрын
Great video! Very well done, sir!
@evenfrank52238 ай бұрын
your going to saw nails without eye protection right in front of my OSHA hand book!?
@charlesjohnson72229 ай бұрын
How did you determine the depth of the refrigerator side panels?
@bushflyr73359 ай бұрын
Great video. Exactly what I needed, thanks.
@chippydog29 ай бұрын
What about refrigerator venting to let heat out behind?
@nkechiolisemekamitchell610310 ай бұрын
Thanks for this. Video is 5 years old but did you ever record how to install the frame/trim?
@mike241010 ай бұрын
There are countless vids on how to remove the trim on YT, but none for the entire frame. As such, thank you very much for the demonstration!!
@Rae-cheese3 ай бұрын
I'm here for the same reason! Now I'm wondering if you MUST install a new door or if you can just spackle and paint the walls. We sometimes have a wheelchair user in the house and we don't need a door as much as we need the extra inches from removing the jamb! But the internet doesn't seem to approve of my plans, the instructions I get are always for replacement never just removal.
@jsurvivor500610 ай бұрын
Great video. Do you score both sides
@shakaracharde10 ай бұрын
I redid cabinets like these in my apartment. I’m having a problem with them not quite closing since I replaced the hinges so I have to take in the inset as well. I’ve been trying to figure out the way to do so. I thought about a router but no tool library rents them out.
@pyro_0210 ай бұрын
Italians:just a screwdriver and a little bit of force
@karlschihl665511 ай бұрын
thanks , me too!
@coreyclarke7378 Жыл бұрын
And a ladder
@coreyclarke7378 Жыл бұрын
I'm no door installation expert but I think a cut off wheel on a grinder or a pneumatic one would work better than that sawzall
@williamedwards4339 Жыл бұрын
Wonderful lesson. The 345 method should be taught to every kid in school by having them actually building something. Thank you.
@LorieWild Жыл бұрын
🇨🇦♥️🇨🇦
@bryjb10 Жыл бұрын
Fail. Part one cut. Part two 2. It’s already installed
@zapletalova67 Жыл бұрын
Not good for UK.. They putting nails in size of Jezus crucifixion 😂😂
@HG-qi3cp Жыл бұрын
Heck naw I will pay someone to do it . I was all for it till he got that cutting machine.
thanks for the instructions, do you have a video with the results? I'm trying to do something similar =)
@Sufficient4UsIsAllah Жыл бұрын
I can understand if you were cutting through screws. But I don’t get why you have to cut through the nails when pulling the door jamb off will pull them out with it?
@lastoute1 Жыл бұрын
What happened to the install vid😮😮😮
@Offthegridfishing Жыл бұрын
Can’t believe I use sleep with this guy , until this day his wife doesn’t know
@jodykershaw7701 Жыл бұрын
Great video on how to do adjustments that show absolutely no detail as to how to do the adjustment! Extremely poor video
@AndreaLopezPeyton Жыл бұрын
Any video on how to install a door frame?
@mikylelightbourn557 Жыл бұрын
Damn rough enough??
@ryang2573 Жыл бұрын
Is there are a non-destructive way of doing this? I have a 100 year old home that I'm trying to restore while keeping as much of the original materials intact as I can. One of its problems is that there's not a single door in the entire house which is still square. I've already shimmed/bent the hinges back into place but - in many cases - the whole frame has gotten out of alignment.
@keoshaadkins364 Жыл бұрын
Could you come do mines lol
@Delton96 Жыл бұрын
Thanks so much! Exactly what I was looking for!!
@crankbait09 Жыл бұрын
is the process the same for homes with plaster walls (no lathe)
@lissamk3990 Жыл бұрын
"Today we're in a real small kitchen"---and I'm sitting here seeing at least double the counter & cabinets in this kitchen than I have in mine. 😄 I love that they kept these original cabinets, though. Fantastic choice!
@Glove-wn7kf Жыл бұрын
No mention of a lintel
@briandavis5928 Жыл бұрын
how to set dept gauge so you don't cut all the way through? I'm looking to cut only half for x joints Thanks
@bloodangel1500 Жыл бұрын
That was so cool u made that look way too easy.
@rhod3s263 Жыл бұрын
Hell nah that’s not how you do it and he knows it 🤣
@ITTGIrL2.1 Жыл бұрын
Thanks exactly to the dam 👉 point💯💯
@tomf9292 Жыл бұрын
Great info. I have to do this in my daughters condo this week! TY!
@komranbehbehani6379 Жыл бұрын
Thx
@sarahzottl4940 Жыл бұрын
I like the wax idea.
@wasclywabbit Жыл бұрын
Thank you, that was exactly the information I’ve been needing.