if u want a good teacher go ask someone who raced on tt isle of men
@blackbirdxx461311 сағат бұрын
Do you just do track bikes
@blackbirdxx461311 сағат бұрын
Hi do you buy the parts or is it mostly sponsored.... What's your day job😂😂
@dhayansubbaiah922212 сағат бұрын
That's an amazing-looking bike, mate. What's the colour known as?
@dragonsandangels1021Күн бұрын
Most of the aus dnt know about this. But even though its chinese this CF MOTO is a well known company right now. And their getting bigger.. And popular this days... This is a Great Bike in most asian countries and in america too.. Its not CHEAP.. its. Agreat begginer bike.
@sp00ky1969Күн бұрын
Would you mind answer a couple of questions about removing the fuel tank? Everyone seems to remove the fuel line from the T fitting but the manual says to remove the two quick-release connectors and that you should replace the fuel line if it’s removed. Do you know how those quick-release connectors operate? Secondly, on the other side of the tank, the front line that goes to the canister has a silver clip that I think needs a special tool and a new clip? Any tips for that line? Can it be removed from further down the line (big round connector above the canister). Cheers!
@oneLКүн бұрын
1. Yes you’re supposed to replace it, from memory I’ve used two on each build and they are super cheap but I dont replace it every single time I take the tank off 2. I get rid of all these connectors and replace with hose clips. Grab the connected section with thick pliers and twist clockwise it’ll pop loose
@sp00ky196923 сағат бұрын
@@oneL Thanks, much appreciated. They made them super easy to work on 😂
@blackbirdxx4613Күн бұрын
Would be nice if you told us how much you paid for it
@oneLКүн бұрын
I’ll do a video costs breakdown
@blackbirdxx46132 күн бұрын
Good idea for a spray booth..... A tent😂
@oneL2 күн бұрын
😂😂😂👍
@blackbirdxx46132 күн бұрын
Mate the motor sounds noisy in the video 😢
@oneLКүн бұрын
Smooth as silk bro 👍
@blackbirdxx46132 күн бұрын
What has it cost so far
@oneL2 күн бұрын
I’ll do a video on the cost in a week or two
@bloop39372 күн бұрын
Omfg are those R15Ms? Seeing those on there while owning one is aweeeeesome
@oneL2 күн бұрын
Yeah he’s got a few of them
@donovanclaggett3 күн бұрын
these vids are awesome. great to find another type of motorcycle content to watch. You've definitely inspired me to start working more mechanically on my own bikes
@oneL3 күн бұрын
Thx Donovan 👍👍👍👍
@AlexStev-vy9ne3 күн бұрын
Mantap pak lek
@shakildewan5873 күн бұрын
I love your video
@nischayrai88463 күн бұрын
Been watching your content from the last few months. Your hardwork and patience is great.🎉
@oneL3 күн бұрын
Thx Nischay. 👍👍👍
@markmercado26663 күн бұрын
It looks so good, good work man keep it up
@oneL3 күн бұрын
Cheers Mark 👍👍
@adriancran59093 күн бұрын
Bike looks mint! 2020+ R1 next💯
@oneL3 күн бұрын
Thx Adrian 👍
@user-td5ok7dz1e4 күн бұрын
The RS660 is an absolute weapon on the track, even when stock! The only reason I sold mine was to get an RSV4! Can’t wait to see the finished product.
@oneL3 күн бұрын
🤞🤞🤞 only 1 episode left..
@user-td5ok7dz1e3 күн бұрын
@@oneL I hope so! Would love to see it doing some laps of a track soon after it’s finished!
@Patchesrepairshop4 күн бұрын
Another great video mate 👍
@oneL3 күн бұрын
Thx guys!
@jpmotorsport47284 күн бұрын
Look forward to seeing this one mate , I bet that was frustrating as such a small tolerance gap for that bolt, at least the guys will sort it 👍🏽, looking forward as always to future content, take it easy mate 👍🏽😎🔥🔥🔥🔥
@oneL4 күн бұрын
Yeah and though I said 5mm, it’s prob more like 3mm!
@Monkeybutt_Motorsports4 күн бұрын
Awesome idea 👍🏿
@sennubalan37334 күн бұрын
Awesome bro
@juniordejavu4 күн бұрын
Very very hot build congratulations 🍾 keep going awesome channel
@amostmg4 күн бұрын
Keep up the good works mate
@tysonlucas91754 күн бұрын
Hey mate I'm a painter that lives down here is Tassie, if you ever need a hand, Or have a question let know, 😅
@oneL4 күн бұрын
Thx Tyson
@edwardjademiclat52544 күн бұрын
Started watching your vids lately they just suddenly popped out in my feed and im glad i watched em Keep up the great work bud! Will be watching ur content from now on❤
@oneL4 күн бұрын
@@edwardjademiclat5254 thx Edward
@jasonking42094 күн бұрын
For all the work you did to that once beautiful bike I hate to say its ugly now. And white wheels? What are you thinking? Sorry man, I know you put alot of time and money in it. But why turn it into a track bike? It loses so much value doing that.
@oneL4 күн бұрын
It was a stat write off so couldnt legally go back on the road…
@famouslyfamous4334 күн бұрын
Some people done realize how much you can sale a track bike for. Good job I need that file for the rectifier mount.
@samuelrose87424 күн бұрын
God I always forget Aussies call sandals thongs 😭😭 love the long form 1 sitting vids and amazing job restoring!!
@oneL4 күн бұрын
Or jandals 😉
@samuelrose87424 күн бұрын
@@oneL of all the Aussie things I dont understand I LOVE 4x golds. Need those imported to the US😭
@jasonking42094 күн бұрын
We call sandals thongs here in the US too.
@rotechrotech40045 күн бұрын
Hello, I congratulate you on the channel and the transformations, I wanted to ask you since in this video you can see that it is a Panigale v4 2018/19 and you put the fairings of the 2022/23 on it. - The question is if it needs any modification or does it fit both in one model and the other, thank you very much.-
@oneL4 күн бұрын
THey all fit you may just need the adapter if you’re looking to use OEM fairings
@rotechrotech40042 күн бұрын
@@oneL Thank you very much for your prompt and precise response.
@brian74316 күн бұрын
what site did he buy the bike on
@oneL6 күн бұрын
Adrenaline performance bikes
@JQDKing7 күн бұрын
Have you seen my brother with his build, please check him out he has made 406km/h with his bike and only going higher and faster. Inus dalhouzie road to 500 is his page please like and follow help him grow
@mammon666mk7 күн бұрын
Looks good my only criticism would be you should have flatted clear coat and got rid of the orange peel
@dpmvgs7 күн бұрын
Hey man, you deserve way more subscribers! This guy is building a whole bike and I’m out here having a hard time installing basic shit on my bike lol. Keep up the good work mate.
@oneL7 күн бұрын
Cheers bro 👍
@radost05148 күн бұрын
why in the end of the video we cant hear the sound of that 65 degree v4 .....i fell scamed...
@oneL7 күн бұрын
Ahhh soz bro, think I started it in an earlier episode
@MartyKarate468 күн бұрын
R1 😍
@MartyKarate468 күн бұрын
Oh wow! Wot a bike! Looks great and u know im a Ducati man through n through!
@oneL8 күн бұрын
Thx mate 👍
@kiddainja28129 күн бұрын
1098 next 😘
@jarrodscott68999 күн бұрын
GSXR or an ol' 90's Superbike like a TL1000
@oneL9 күн бұрын
TL1000 would be cool but not many buyers….
@jarrodscott68998 күн бұрын
@oneL reach out to yer fans and see who's got a ol' s#$tbox that they wanna keep but wanna see modernised, or local breaker who's into shameful promotion
@Bartman.139 күн бұрын
Another great job mate That " Australian Kiwi Passion " Aprilia is dope 💪💪💪
@oneL9 күн бұрын
Thx Bartman 👍👍🔥🔥
@bongobigballs9 күн бұрын
Vic Reaves does bikes!
@colinaitken90469 күн бұрын
The color combination is wicked. Did you change your mind about a white separation stripe or did I misunderstand. An R1 would be a nice project, had one many years ago.
@oneL9 күн бұрын
I did the white stripes on the side but then decided against doing them on top…..🤷🏻♂️
@huynhanhtrungtin9 күн бұрын
It takes a special person to have the vision and revive this bike to its former glory. Great video mate! You inspire me to start tinkling with my street fighter v2!
@oneL9 күн бұрын
Thx Tin 👍
@user-td5ok7dz1e9 күн бұрын
Great build, I love Aprilia RSV4s, it will be an amazing bike on the track. You should definitely do an R1 next though! Keep up the great content.
@oneL9 күн бұрын
Thx Jeff 👍
@MartinBuiz10 күн бұрын
Please do a japanese bike 😊
@oneL10 күн бұрын
🤞🤞🤞🤞
@sennubalan373310 күн бұрын
Very nice colour bro
@oneL10 күн бұрын
Cheers bro
@famouslyfamous43310 күн бұрын
I could sure use a friend like you to help me with my Aprilia it’s been a lot to get figured out alone. Looks great I’m doing a flip flop blue to black sonic themed for my son.
@oneL10 күн бұрын
@@famouslyfamous433 cool! I watched sonic nice last night!
@famouslyfamous4339 күн бұрын
@@oneL do you have a file for the relocate for the rectifier I need one for mine and can’t find a 3d print one anywhere
@TheStarkBiker10 күн бұрын
I really do like the colour. That's how I would like it on a trackbike. Not to flashy but so clean that it stands out. I would love to see what you can do with a crashed ZX10R 😏
@oneL10 күн бұрын
Yeah there’s a zx10rr at auction next week, my mate is bidding on it so be cool if we got to build that for him 🤞
@TheStarkBiker10 күн бұрын
@@oneL Awesome! I will keep my fingers crossed for you! 🤞
@Matthewlewis2410 күн бұрын
This bike looks incredible… good job! 🔥🔥🔥🔥
@oneL10 күн бұрын
Thx Matt 👍👍👍
@MIKESBUILDZ10 күн бұрын
Let’s goooo! Turned out great! 🔥 I know a thing or two about painting and it’s a pain the behind.
@oneL10 күн бұрын
Thx Mike
@jpmotorsport472810 күн бұрын
Awesome work mate, I don’t think until you’ve done it yourself that people understand the time involved in the masking alone, stunning job mate , looks the business 👍🏽😎🔥🔥🔥