3 жыл бұрын
Пікірлер
@Mascotal 5 күн бұрын
I got plastic fiber decking boards and installed them on my trailer. My jon boat slides on with one hand now.
@reeldazed539 5 күн бұрын
That is likely the best way to do it. They will last a lot longer than the wood bunks. Thanks for watching!
@E.D.C_aesthetic 26 күн бұрын
How is it holding up?
@reeldazed539 25 күн бұрын
Doing great. Durable. No issues at all with it.
@79Rybred Ай бұрын
You may want to try lowering it a bit. Could help with the noise? Idk... thanks for the video!
@reeldazed539 Ай бұрын
I appreciate it! Thanks for watching!
@michaelsmallwood2034 Ай бұрын
Had boat tuned .planes perfectly now
@Je-tm2ku Ай бұрын
Honestly as I search for a trailer this is the set up I think I want
@reeldazed539 Ай бұрын
This works really well. I have used a kayak trailer (boat trailer) and this one (utility trailer)and I am not sure that this setup is not better or at least as good.
@Je-tm2ku Ай бұрын
@@reeldazed539 yup I just saw the new trailer setup video. Was going to ask which you liked better? I want to be able to just run 2 kayaks side by side for my wife and I. I’m not super concerned about having the back into the water and float it although that is always nice too.
@reeldazed539 Ай бұрын
Floating it on /off and the ability to leave the pedal drive in (happened to fit in between bunks in deployed position) on boat trailer is the only real benefit. Other than that the utility trailer is just as good.
@cjr4497 Ай бұрын
How long are the rod lockers?
@reeldazed539 Ай бұрын
The side compartments are actually more suited for storage than for storing rods. Unfortunately they will be to short. The side console model can be equipped with rod lockers and they are around 8ft. Thanks for watching!
@tanneradams20 Ай бұрын
@@reeldazed539if you see any side consoles come in grab a vid! I can’t find a single one real life video of one
@reeldazed539 22 күн бұрын
If one comes in I will get a video
@chip6954 Ай бұрын
Between mounting on the rail versus the handle, which do you prefer? Thx, your videos are very helpful as I just bought the 93sv/have same kayak.
@reeldazed539 Ай бұрын
My preference is on the handle. It keeps my rail free and gets the screen closer to me. The Navarre kayak handles work great!
@michaelsmallwood2034 Ай бұрын
It would be nice if the one I bought would plane.very un happy with this boat. I stored it in front yard dont know what to do with it.
@cjr4497 Ай бұрын
Change your prop or angle your engine properly. Your issue has nothing to do with the boat.
@michaelsmallwood2034 Ай бұрын
I put the motor all the way down and no difference ..Used the trim no help
@reeldazed539 Ай бұрын
Hey, sorry to hear you are having issues. What model/size boat and motor do you have? Let me know all the info you can on it and maybe we can get you on plane. Thanks!
@michaelsmallwood2034 Ай бұрын
Took boat to be tuned ..planes perfectly
@reeldazed539 Ай бұрын
Glad you were able to get it fixed. Thanks for watching!
@michaelsmallwood2034 Ай бұрын
Bought one , will not plane. What little it does plane when I try to trim it goes right back in the air.
@reeldazed539 Ай бұрын
What model and what size motor? Is it a Thor?
@michaelsmallwood2034 Ай бұрын
Yes it is a thor 75 hp and boat is 1860 lake hammer
@reeldazed539 Ай бұрын
That 75 should push that boat with no issues. Give us a call at number listed at the end of my video if you would like to. I will try and help you. Ask for WC. Thanks for watching and hopefully you can get that resolved.
@michaelsmallwood2034 Ай бұрын
Had trim tabs tuned .planes perfectly now
@reeldazed539 Ай бұрын
Good to hear! Thanks for watching!
@colemanroberts7037 2 ай бұрын
It be nice if there boats would get delivered on time
@reeldazed539 2 ай бұрын
Hey, sorry to hear you had a tough time with that. Hopefully you will be on the water soon.
@harlowecustommicrogreens 2 ай бұрын
Cool Setup. No issues with bait being stuck to the pump? What size bilge is that ? 250gph?
@reeldazed539 2 ай бұрын
It’s a 250. I use it for bass when I fish a tournament so I haven’t put any bait fish in there. Works great though. Thanks for watching!
@coopermonaghan1615 2 ай бұрын
If you use it for bait fish, just put some mesh over the holes where a baitfish could potentially get stuck
@MattyLentzGETRICKROLLED Ай бұрын
@@coopermonaghan1615 Great idea!
@DannyBTalks 2 ай бұрын
Great setup!
@reeldazed539 2 ай бұрын
Thanks! It works great.
@terryparis 2 ай бұрын
i hv those seat risers on my 120....they are great.....great setup there....they dont affect stability
@reeldazed539 2 ай бұрын
I agree. Money well spent. Thanks for watching!
@mbswolf2003 2 ай бұрын
Thx for video. You take care of your stuff, wouldn’t mind buying used from you!
@reeldazed539 2 ай бұрын
I appreciate that! Stuff costs to much to not keep it in proper shape. Thanks for watching!
@mbswolf2003 2 ай бұрын
@@reeldazed539 yes it does. I’m the same way.
@larrywigmore1243 2 ай бұрын
I think it's a good idea ,but seems to me you're going to loose more baits
@reeldazed539 2 ай бұрын
I think you are right about that. I am interested in how the hookups are also. I will follow up in comments after I use it awhile. Thanks for watching!
@kenestra123 2 ай бұрын
Great job! Gonna do something similiar.
@reeldazed539 2 ай бұрын
It still works well. Thanks!
@MudAndWater13 2 ай бұрын
pretty cool #duckboat
@reeldazed539 2 ай бұрын
Thanks
@MudAndWater13 2 ай бұрын
great video well detailed
@reeldazed539 2 ай бұрын
Much appreciated!
@313dmilam 2 ай бұрын
Awesome video. Been waiting for a video like this on one of these boats. Thanks!
@313dmilam 2 ай бұрын
Few questions. Hows handling? Is the weight of the boat noticeable? What speeds you getting with the 50hp?
@reeldazed539 2 ай бұрын
The boat handles very well. It comes on plane quickly and is very nimble. No issues at all handling. Very stable. It is slightly heavier than a normal Jon boat due to the thickness and build quality but it is still a light boat. No issues with that at all. I tow it with my old Ford Ranger. I am still in the break in period so I haven’t really tried for a top speed yet. I have hit 32 on my GPS so it is going to be in that range. I have not played with the props or anything yet and that speed was with a stainless. I plan on testing between it and an aluminum soon. Hope this helps. Thanks for watching!
@313dmilam 2 ай бұрын
@reeldazed539 nope, that was perfect. Really appreciate it. Good to know these things before dropping 27k and not liking it
@davemasello 3 ай бұрын
What material do you have in the trailer that the boat is sitting on? It looks like it slides easily?
@reeldazed539 3 ай бұрын
It is old pieces of kennel flooring that I had. I have since bought a small boat trailer but this worked great. The only reason I changed is so I didn’t have to lift at all due to a back injury. I have a video on my channel showing it more in depth. Thanks for watching!
@fish4fun354 3 ай бұрын
What mounts and ball mounts did you use for the garmin 93sv?
@reeldazed539 3 ай бұрын
RAM MOUNTS Track Ball Marine Electronic Mount RAM-111B-354-TRA1U. I have a video comparing it to a yak attak on my channel. It has worked great. Thanks for watching!
@fish4fun354 3 ай бұрын
@reeldazed539 I think I've figured out that I'll use a 1.5 inch ball mount with long arm just not sure where you got the bolt to mount through naverre handle.
@reeldazed539 3 ай бұрын
It’s a t bolt. I think it came with the mount or some of my other accessories. They have them on Amazon as well.
@curtishurlbut1085 3 ай бұрын
Have the older version and the bag is great other then the putter getting caught on the lip of the bag when taking it out. Was hoping they would have fixed that issue by now
@reeldazed539 3 ай бұрын
Yeah, would be nice if the curved the corners some to take that edge off where it catches. It is still a great bag though. Thanks for watching!
@alexgagnon683 3 ай бұрын
Good video, thanks! Btw, what do you have for tires on this machine??
@reeldazed539 3 ай бұрын
I appreciate it. Hope it helps. Those are Maxxis Zillas on it.
@jamarcigar 3 ай бұрын
I run garmin 93sv on that yakattack mount. It does have a little wobble but I heard that was done intentionally to give a little in case it gets hung on something while on the water ie. Trees branches etc. I feel your apprehension tho but I haven't had any issues personally
@reeldazed539 3 ай бұрын
That does make sense in case does get hit or hung up. They make quality stuff and you can’t go wrong with either. Thanks for watching!
@IcecoldDan26 23 күн бұрын
Sounds like marketing mumbo jumbo to me. I could see them in a meeting after realizing the mount they just created wobbles, so after brainstorming, they came up with the story of it being designed that way as a feature.
@Trepp1 3 ай бұрын
On your seat risers, what was your ratio from the front to the back like? How tall were your back ones to your front ones
@reeldazed539 3 ай бұрын
In the back the risers lift the seat right at 3 1/2 inches. In the front the risers are 1 1/2 inches, but the original seat slider goes on top of the front risers. It is 1/2 inch thick thus making the front 2 inches. So it would be 3 1/2 inches rear and 2 inches front. It is very comfortable and I do not feel as though I am reclined to far or sitting forward to far. It is balanced well. Hope this helps. Thanks for watching!!
@Trepp1 3 ай бұрын
@@reeldazed539 thanks
@GarryReynolds 3 ай бұрын
Did you notice any stability change with those 4” seat risers?
@reeldazed539 3 ай бұрын
. I thought there would be some difference with stability but I did not notice any at all. Very comfortable. Thanks for watching!
@lucasmussen 3 ай бұрын
got mine at goodwill for 10 dollars! great deal
@reeldazed539 3 ай бұрын
That is a great deal! Congrats on that find.
@user-dn4kg6yi2w 4 ай бұрын
Where did you get the set risers? It coming up in the transcript as yakabi
@reeldazed539 4 ай бұрын
Hey, they are from yakhobby.com.
@51ddb 4 ай бұрын
Who is the trailer manufacturer. Looks like a nice rig.
@reeldazed539 4 ай бұрын
It’s a Load Rite made for a 14 ft Jon Boat. Works great!
@51ddb 4 ай бұрын
@@reeldazed539 thanks!
@user-zo5zj5rw3j 4 ай бұрын
Nice video and thanks for posting. Quick question which set of clubs did you purchase first?
@reeldazed539 4 ай бұрын
I bought the Gigas first. They are great clubs. You can’t go wrong with either.
@user-zo5zj5rw3j 4 ай бұрын
@@reeldazed539 Thanks for the reply
@WhatTheH3ll1000 4 ай бұрын
Which ratchet straps did you use?
@reeldazed539 4 ай бұрын
Cargobuckle F103745 on Amazon. They work great so far. Thanks for watching!
@alexsisjohnson9307 4 ай бұрын
We’ve got the same boat, I changed my plastic ruder out for an aluminum one from Navarre kayak what a world of difference. Also your power cord going to your motor i use the two clips to strap it to the power pole so that it would not get tangled up or snagged on anything great set up you have.
@reeldazed539 4 ай бұрын
Thanks! I have put a couple zip ties on that cord now to hold it tighter. I was wondering how much of a difference that rudder made. I may have to get one. He really has some good stuff for these kayaks. Thanks for watching and the positive info!!
@davidpacker117 4 ай бұрын
I had never heard of that motor but it sure purrs along. Thanks for sharing.
@reeldazed539 4 ай бұрын
It works well for how compact it is. Helps a lot when you get tired of pedaling. LOL. Thanks for watching!
@fendrich3574 5 ай бұрын
Great video
@reeldazed539 5 ай бұрын
Thanks!
@JWH808 5 ай бұрын
I just got my hands on the weight. How do you install? Do I need to disassemble the head?
@reeldazed539 5 ай бұрын
No disassembly. Just push the weight in and tighten the small screw on the weight afterwards.
@liamomalley7452 5 ай бұрын
where did you find it
@JWH808 5 ай бұрын
@@reeldazed539 thanks. He sent me the insert, but it's not cut to fit into the holes. I need to figure out how to remove the existing insert.
@letun3481 6 ай бұрын
Did yo have any issues installing Navarre handle? Did holes match? Did mounting surfaces on the handle and kayak match? thanks!
@reeldazed539 6 ай бұрын
I had no issues at all. They matched perfectly with no issues and have held up well.
@letun3481 6 ай бұрын
Excellent review! Did yo have any issues installing Navarre handle? Did holes match? Did mounting surfaces on the handle and kayak match? thanks!
@reeldazed539 4 ай бұрын
No issues at all. Everything lined up well and it was a quick install. Sorry for the slow response. Thanks for watching!
@mikejanssen6344 6 ай бұрын
I know this was 2 years ago but, if you are going to do a review, maybe research your product first.
@jquatt21 6 ай бұрын
Thank you for spending the extra time going over the 14 way divider.
@reeldazed539 6 ай бұрын
No problem. Hope it helps. Thanks for watching!
@kennystats 8 ай бұрын
Appreciate the video and review
@reeldazed539 8 ай бұрын
Thanks for watching!
@watchluver 8 ай бұрын
I'm at the ramp and in the water within 5 minutes! No trailer just the native side kick landing gear. set it right off the bed f my truck, load all of the equipment that is transported in the back seat...walk it right into the water and i'm off....I've caught fish within 10 minutes after I arrived at the ramp! You do have a nice set-up! very organized and well though out! 👍
@reeldazed539 8 ай бұрын
Sounds like you have a great set up. Thanks for watching!
@mexitalian56 8 ай бұрын
I bought one before and even had it engraved. Then I divorced her and tossed the weight ugh!
@reeldazed539 8 ай бұрын
Yeah, it appears the guy I bought this from no longer makes them.
@josephscarborough708 8 ай бұрын
Noooooo not the iron covers and top flights 😢
@fanoftheboxtoo 9 ай бұрын
great bag they need to fix the putter well however.
@reeldazed539 9 ай бұрын
Yeah it does catch on larger grips if you are not careful, but definitely not a deal breaker. Overall great bag. Thanks for watching!
@TWTexasA1 9 ай бұрын
The putter hole is awesome . I’ve got a suction cup on my putter and fits with ease. I bought this bag to replace my Sun Mountain C130 bag that’s about 15 years old and still in great condition but I really like the improvements on this new bag and it’s about 21/2 pounds lighter than my old bag….👍🏼👍🏼👍🏼👍🏼
@reeldazed539 9 ай бұрын
Yes. It is definitely a great bag. One of the best I have had.
@TWTexasA1 9 ай бұрын
I’ve got jumbo grips and they fit just fine on this bag… this guy is nit picking the heck out of this bag. I feel sorry for his wife…😭😭😭😭
@featherfoot614 7 ай бұрын
Especially as he's always getting snagged on a lip when pulling out
@burningbush_eth 14 күн бұрын
Same. Lol I have jumbo on all of mine and a tour 5.0 on my putter. Never had an issue in this bag
@mattybassfishing 10 ай бұрын
Would the ram mount be able to hold a Garmin 106 sv(10in)?
@reeldazed539 10 ай бұрын
I have the Garmin 93sv which is slightly smaller than your 106sv. The listed sizes are as follows- 93sv= 11.4”x 6.5” x 2.4” 106sv= 11.6 “ x 7.7” x 3.9” With just that small amount of difference I do not think you would have any issues with it. It has proven to be very sturdy for mine and I believe it would serve you well. If you do get it let me know how it does for you and thanks for watching!
@Mossy24331 10 ай бұрын
You running live
@reeldazed539 10 ай бұрын
No. I have thought bout it but I’m wanting to keep it somewhat simple…..at least for now.
@kevinpitts3548 10 ай бұрын
That would be awesome for my Bite fd!
@reeldazed539 10 ай бұрын
It has been one of my favorite mods. Works great!
@masondick4851 10 ай бұрын
Hi. I did a new voltage regulator. Mine bounces between 14.2-14.7 mostly but sometimes up to 15-15.2 and back down. My dash flicker and other issues went away but I’m wondering what you think about it.
@reeldazed539 10 ай бұрын
Make sure all your connections are clean and it is grounded well. If those are good it could possibly be your battery. I am definitely not an expert so I would suggest doing some research online and see what you find.
@zenshy2139 3 ай бұрын
In ours the voltage is sometimes 11.7 and at one point it was over 16 volts. Do you think it's the voltage regulator?
@JCASS611 10 ай бұрын
I had them and returned them. I was hitting 7 thru pw all the same distance. that was my experience.
@reeldazed539 10 ай бұрын
Hate to hear that they didn’t work out for you.
@lowlifeangler 10 ай бұрын
I would put side kick landing wheels on the side, park the truck and trailer. And wheel the kayak over there or use a dirt ground ramp to avoid fees. A kayak made to drop in anywhere
@reeldazed539 10 ай бұрын
I have looked at those. Some of the places I go are steep and wheeling it is a pain. Definitely something to think about though. Thanks for watching.
@lowlifeangler 10 ай бұрын
@@reeldazed539 Throwing my kayak on J bars is a pain but it only weights 57 lbs. Getting a trailer and hitch next year before I upgrade my kayak. I want a Perception Crank 10' , only have a $400 Lifetime Tamarack pro lol